1. Optical TMF814 CORBA Cartridge Guide
  2. About Design Studio Construction

7 About Design Studio Construction

This chapter explains how the Oracle Communications Network Integrity Optical TMF814 CORBA cartridge is built from the Oracle Communications Design Studio perspective.

Model Collections

Table 7-1 shows the Design Studio construction of the Generic TMF814 model collection.

Table 7-1 Generic TMF814 Model Collection

Specification Name Dynamic Entity Type

tmf814MEGeneric

Physical Device Specification

tmf814DeviceGeneric

Logical Device Specification

tmf814EquipmentGeneric

Equipment Specification

tmf814EquipmentHolderGeneric

Equipment Holder Specification

tmf814PortGeneric

Physical Port Specification

tmf814TPInterfaceGeneric

Device Interface Specification

This specification applies for all types of termination points (TPs).

tmf814TPLayersGeneric

Device Interface Configuration Specification

Actions

The following tables outline the Design Studio construction of the Optical TMF814 CORBA cartridge actions and associated components:

Note:

Parameter values are case-sensitive and must be entered in capital letters when commands are run from a command line interface.

Table 7-2 Actions Design Studio Construction

Action Name Result Category Address Handler Scan Parameter Group Processors

Discover Abstract TMF814 action

Device

N/A

IncrementalSacnParameter
  • TMF814 Property Initializer
  • TMF814 Session Manager
  • TMF814 Device Recorder Initializer
  • TMF814 ME Collector
  • TMF814 Updated ME Discoverer
  • TMF814 Device Modeler
  • TMF814 Equipment Collector
  • TMF814 Equipment Modeler
  • TMF814 PTP Collector
  • TMF814 PTP Modeler
  • TMF814 CTP Discoverer for PTP
  • TMF814 FTP Collector
  • TMF814 FTP Modeler
  • TMF814 CTP Discoverer for FTP
  • TMF814 Device Persister
  • TMF814 Device Recorder Persister
  • Update ME Notification Status
  • TMF814 SNC Discoverer
  • TMF814 Cross-Connect Discoverer
  • TMF814 SNC CC Discoverer
  • Update SNC Notification Status
  • TMF814 Topological Link Config Initializer
  • TMF814 Topological Link Collector
  • TMF814 Updated Topo Link Collector
  • TMF814 Topological Link Modeler
  • TMF814 Pipe Persister
  • Update TL Notification Status

Discover TMF814 action

Device

N/A

TMF814Parameters. See Table 7-3

AutoResolutionParameter. See Network Integrity Developer's Guide.

Parallel Process Parameters. See Network Integrity Developer’s Guide.

  • TMF814 CORBA Property Initializer

  • TMF814 Property Customizer

  • TMF814 MultiThread Device Modeler

  • TMF814 MultiThread TL Modeler

Discover Huawei U2000 action

Device

N/A

Parallel Process Parameters. See Network Integrity Developer’s Guide.

  • Huawei Customizer

  • Huawei MSTP EndPoint Collector

  • Huawei MSTP EndPoint Modeler

  • TMF814 Huawei MultiThread Device Modeler

Table 7-3 TMF814 Scan Parameters Design Studio Construction

Parameter Name Parameter Type Description UI Label

UserName

Text box

User name of the element management system (EMS) or network management system (NMS) used for getting details.

Username

Password

Secret text

Password of EMS or NMS system.

Password

EMSNamingService

Text box

EMS Naming Service

The EMS session factory CORBA object name.

Ems Naming Service

EMSNamingServiceFormat

Drop down

List: PLAIN, STRINGIFIED

The EMS session factory CORBA object name format.

Ems Naming Service Format

CollectEquipment

Drop down

List: TRUE, FALSE

Collect Equipment

CollectTP

Drop down

List: ALL, ONLY PTP, ONLY FTP, NONE

Collect Termination Points

CollectCTP

Drop down

List: CURRENT, IN USE, POTENTIAL, NONE

Collect Connection TP

EquipmentFetchSize

Text box

Number of equipment objects to fetch at a time for each EMS call.

Equipment Fetch Size

TPFetchSize

Text box

Number of contained TP objects to fetch at a time for each EMS call.

Termination Point Fetch Size

CTPCollectionDepth

Text box

The depth (level of children objects) to which contained TPs are collected.

Contained TP Collection Depth

ORBProperties

Text box

Semicolon separated name value pairs for ORB Properties.

Orb Properties

ORBArguments

Text box

Semicolon separated name value pairs for ORB Arguments.

Orb Arguments

ManagedElementName

Text box

Name of ME. This parameter works in combination with Managed Element Name Qualifier. This parameter helps to filter the scan.

Managed Element Name

ManagedElementNameQualifier

Drop down

List: EQUALS, EQUALS_IGNORE_CASE, CONTAINS, CONTAINS_IGNORE_CASE, STARTS_WITH, STARTS_WITH_IGNORE_CASE, ENDS_WITH, ENDS_WITH_IGNORE_CASE

This parameter works in combination with Managed Element Name to filter the collected MEs by name and qualifier.

Managed Element Name Qualifier

NetworkElementNames

Text Box

Name of NE. This parameter works in combination with Network Element Names Qualifier. This parameter helps to filter the scan.

Network Element Names

NetworkElementNameQualifier

Drop down

List: EQUALS, EQUALS_IGNORE_CASE, CONTAINS, CONTAINS_IGNORE_CASE, STARTS_WITH, STARTS_WITH_IGNORE_CASE, ENDS_WITH, ENDS_WITH_IGNORE_CASE COMMA_DELIMITED_NAMES, COMMA_DELIMITED_NAMES_IGNORE_CASE

This parameter works in combination with Network Element Name to filter the collected NEs by name and qualifier.

Network Element Name Qualifier

CrossConnectCollectionType

Drop down

List: USE_SNC, USE_ME_MANAGER, NONE

This parameter controls how cross-connects are collected. Select None to disable cross-connect collection.

Cross-connect Collection Type

TopologicalLinkCollectionType

Drop down

List: ALL, BETWEEN_SN, INSIDE_SN, NONE

This parameter controls how topological links are collected. Select None to disable topological link collection.

Topological Link Collection Type

Table 7-4 Discovery Processor Design Studio Construction

Discovery Processors Variable

CORBA Property Initializer

Input: N/A

Output:

  • corbaSeed(oracle.communications.integrity.abstractcorbacartridge.CorbaSeed)

    A JavaBean that holds properties related to the CORBA cartridge. See Network Integrity CORBA Cartridge Guide for more information.

TMF814 CORBA Property Initializer

Input: corbaSeed

Output: corbaSeed

CORBA Connection Manager

Input: corbaSeed

Output:

  • namingServer(org.omg.CosNaming.NamingContextExt)

  • orb(org.omg.CORBA.ORB)

See Network Integrity CORBA Cartridge Guide for more information.

TMF814 Property Initializer

Input: N/A

Output:

  • tmf814Properties(oracle.communications.integrity.tmf814discovery.beans.TMF814Properties)

    A JavaBean that contains the set of TMF814 properties. See Table 2-1 for a list of properties.

  • tpDetailMap(oracle.communications.integrity.tmf814discovery.model.tp.TPNameMap)

    A map listing properties to PTP names.

TMF814 Property Customizer

Input:

  • tmf814Properties

  • orb

  • namingServer

Output: tmf814Properties

Huawei Customizer

Input:

  • customProperties

  • tmfNameToDeviceNameMap

    (oracle.communications.integrity.tmf814discovery.model.DeviceNameMapping)

Output:

  • tmfNameToDeviceNameMap

    (oracle.communications.integrity.tmf814discovery.model.DeviceNameMapping)

TMF814 Session Manager

Input: tmf814Properties

Output:

  • sessionManager(oracle.communications.integrity.tmf814discovery.session.SessionManager)

    A session manager instance responsible for creating emsMgr and multiLayerSubnetwork, and for managing EMSSession and TMF814 Object managers.

TMF814 Device Recorder Initializer

Input: tmf814Properties, customProperties

Output:

  • recordMode(boolean)

    A Boolean indicating whether Recording Mode is enabled.

TMF814 ME Collector

Input: N/A

Output:

  • meIterable

    Iterable object for each collected ME.

TMF814 Device Modeler

Input:

  • tmf814Properties

  • customProperties

  • managedElement(org.tmforum.mtnm.managedElement.ManagedElement_T)

    One instance of the meIterable. This processor is run once for each instance of manamedElement.

Output:

  • physicalTree(oracle.communications.integrity.tmf814discovery.model.ocimtree.PhysicalTree)

    A representation of the Information Model Physical Tree containing a physical device as the root object, to which child objects can be added.

  • logicalTree(oracle.communications.integrity.tmf814discovery.model.ocimtree.LogicalTree)

    A representation of the Information Model Logical Tree containing a logical device as the root object, to which child objects can be added.

TMF814 Equipment Collector

Input: tmf814Properties, customProperties, sessionManager, physicalTree, managedElement

Output:

  • equipmentOrHolderIterable(java.lang.Iterable<org.tmforum.mtnm.equipment.EquipmentOrHolder_T>)

    Iterable object that iterates for each collected Equipment object or Holder object.

TMF814 Equipment Modeler

Input:

  • tmf814Properties

  • physicalTree

  • equipmentOrHolder(org.tmforum.mtnm.equipment.EquipmentOrHolder_T)

    One instance of the equipmentOrHolderIterable. This processor is run once for each instance of equipmentOrHolder.

Output:

  • equipment(oracle.communications.inventory.api.entity.Equipment)

    Returned value if input is equipment.

  • equipmentHolder(oracle.communications.inventory.api.entity.EquipmentHolder)

    Returned value if input is equipment holder.

TMF814 PTP Collector

Input:

  • tmf814Properties

  • customProperties

  • equipment(oracle.communications.inventory.api.entity.Equipment)

    A modeled Information Model equipment object.

  • equipmentHolder(oracle.communications.inventory.api.entity.EquipmentHolder)

    A modeled Information Model equipment holder object.

Output:

  • ptpIterable(java.lang.Iterable<org.tmforum.mtnm.terminationPoint.TerminationPoint_T>)

    Iterable object for each collected PTP belonging to an Equipment object.

TMF814 PTP Modeler

Input:

  • tmf814Properties

  • equipment

    An Information Model object that is modeled as the parent for all ports.

  • physicalTree

  • logicalTree

  • tpDetailMap

  • ptp(org.tmforum.mtnm.terminationPoint.TerminationPoint_T)

    A PTP object, modeled as a Physical Port in the Physical Tree, and as a Device Interface in the Logical Tree.

Output:

  • deviceInterface(oracle.communications.inventory.api.entity.DeviceInterface)

    A modeled Information Model interface object.

  • physicalPort(oracle.communications.inventory.api.entity.PhysicalPort)

    A modeled Information Model port object.

TMF814 CTP Discoverer for PTP

Input:

  • tmf814Properties

    Provides the CTP flag, termination point (TP) fetch size, and CTP depth properties.

  • customProperties

  • deviceInterface

  • logicalTree

  • physicalPort

  • ptp

    Parent PTP for which all CTPs are discovered.

Output: n/a

TMF814 FTP Collector

Input:

  • tmf814Properties

    Provides the CTP flag and TP fetch size properties.

  • customProperties

  • logicalTree

  • managedElement

    The name of the ME is used to fetch the FTP.

Output:

  • terminationPointIterable(java.lang.Iterable<org.tmforum.mtnm.terminationPoint.TerminationPoint_T>)

    Iterable object for each collected FTP.

TMF814 FTP Modeler

Input:

  • tmf814Properties

  • logicalTree

  • tpDetailMap

  • terminationPoint(org.tmforum.mtnm.terminationPoint.TerminationPoint_T)

Output:

  • deviceInterface

    Modeled Information Model object for a TP. TPs are modeled and added to the Logical Tree as direct child objects of a logical device.

TMF814 CTP Discoverer for FTP

Input:

  • tmf814Properties

  • customProperties

  • terminationPoint

    TPs for which CTPs are fetched and modeled.

  • deviceInterface

    Parent Information Model object for all top level CTPs.

  • logicalTree

Output: n/a

TMF814 Device Persister

Input:

  • tmf814Properties

  • physicalTree

  • logicalTree

  • managedElement

Output: n/a

TMF814 Device Recorder Persister

Input: tmf814Properties

Output: n/a

TMF814 Cross-Connect Discoverer

Input: tmf814Properties, customProperties, tpDetailMap

Output: n/a

TMF Topological Link Collector

Input: tmf814Properties, customProperties, tpDetailMap

Output:

  • topologicalLinkIterable(java.util.Iterable)

    Iterable object that iterates for each collected topological link object.

  • tlPipeMap(java.util.Map<java.lang.String,java.utilList<oracle.communications.inventory.api.entity.Pipe>>)

    A map listing all collected topological links by their container group.

TMF814 Topological Link Modeler

Input:

  • tmf814Properties

  • tpDetailMap

  • topologicalLink(org.tmforum.mtnm.topologicalLink.TopologicalLink_T)

  • tlPipeMap

Output:

  • linkPipe(oracle.communications.inventory.api.entity.Pipe)

    A modeled topological link as a pipe entity.

TMF814 Pipe Persister

Input: tmf814Properties, tpDetailMap, tlPipeMap

Output: n/a