7.2 Resolved Bug List
The table in this section lists the bugs resolved in the following build:
- EAGLE 47.1.0.1.0-79.34.0
- EAGLE 47.1.0.0.0-79.32.0
The resolved bug table shows an impact statement for the severity 1 and 2 bugs as well as severity 3 bugs associated with an SR.
Note:
Resolved bugs are sorted in ascending order by severity and then by bug number.Table 7-1 EAGLE Release 47.1.0.1.0-79.34.0 Resolved Bugs (July 2024)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 36589970 | Y | 2 | ACTIVE Partition of MASP becomes inaccessible after re-initializing MASP card | If this issue occurs, the Eagle database on the E5-MASP card will become inconsistent, report DMS errors for reading/ writing Eagle database tables, and fail to connect to the IMT buses when the card is booted. |
| 36297530 | N | 3 | R47.1_SNMP:Active OAM boots with "ath_vxw_mgr. Line 2057" and Severity 1 "oamhc_snmp.c" observed whenever "snmpuim" parameter is turned ON/OFF | |
| 36302173 | N | 3 | Flash is failing via Recovery console from R47.1 to R48 | |
| 36757917 | N | 3 | Update format/copy-disk code to create equal partitions of 2GB same as media builder | |
| 36751185 | N | 4 | Uplift ZLIB version to 1.3.1 | |
| 36753891 | N | 4 | Need to upgrade open source item LZMA to latest version 24.07 |
Table 7-2 EAGLE Release 47.1.0.0.0-79.32.0 Resolved Bugs (October 2023)
| Bug Number | SR | Severity | Title | Customer Impact |
|---|---|---|---|---|
| 28518265 | N | 3 | R46.7_UC1enh:UIM not getting generated for invalid ACN scenario in ATI ACK msg | |
| 33444278 | Y | 3 | BIP DATA INVALID error seen on some cards and chg-bip-rec doesnt work on some cards | No traffic impact.
Workaround:
BIP Alarm on 32 bit cards can be cleared using the below command: |
| 34459022 | N | 3 | R47.0_Eng79_ST: USB is becoming inaccessible on executing chg-tbl command with action=reset for disk=usb/remove | |
| 34551823 | Y | 3 | Raise an alarm for hung card in the system | If no alarm is generated by the system, the customer will not know that a card is in a hung state and not processing the traffic. |
| 34617019 | Y | 3 | SFAPP SYSTEM "eagleMRNSubResourceName" field as "UNSUPPORTED" in the SNMP alarmTrap | """eagleMRNSubResourceName"" for the
SFAPP system will be displayed as ""UNSUPPORTED""
rather than ""SFAPP_SYSTEM"". Therefore
""SFAPP_SYSTEM"" alarm monitoring will display
incorrect data and may impact ""SFAPP SYSTEM"" alarms
only on the EMS/NMS side.
Note: There is no traffic/functionality impact on EAGLE side; all alarms are still being sent from the EAGLE to the EMS/NMS server. |
| 34848580 | N | 3 | Add support for configurable option to enable SNMPv3 | |
| 35091626 | Y | 3 | Traceroute takes path via DEFROUTER even if IP-RTE entries are defined | None as workaround is to test connectivity to remote IP address using the PING command. |
| 35132021 | Y | 3 | SR: FTRA incorrect output for RTRV-GTA csv data | With one less delimiter, if OPCODE tag is missing, the customer engineering system will not correctly parse the csv file. |
| 35184932 | Y | 3 | Boot loader update fails for EPM-B cards during upgrade phase 3 | Cards must be flashed manually which can cause system upgrade maintenance window to be extended past the allowed time. Workaround: Flash each card manually. |
| 35358358 | Y | 3 | R47.0_ST: observing discards for mtp3 service in rept-stat-mfc on setup e1181001. | "This is a rare issue. Traffic drop will be observed on
the card when this issue is hit. The below command can be used to
identify which card is discarding the traffic: |
| 35358364 | Y | 3 | SR: Raise an alarm when there is MTP3 PDU discards occurring in the STP | Currently, there is no UAM to report when a LIM card is in MFC PDU discard. Hence, the customer would not know about a traffic impacting situation. The bug request is to raise an alarm when this condition exists so the customer will be aware of the traffic impact and react to the situation. |
| 35468555 | N | 3 | R47.0.0.1.0_MR:ENETB STC copy function getting deactiavted at 3500TPS on vxworks6.9 | |
| 35702830 | N | 3 | Add IPSG GPL in Release 47.1 | |
| 35860436 | Y | 3 | IP Routes for port C associations are getting lost after re-initializing the card. | SLIC 4 port IPSG69/IPSG932 (only with 4 port): The associations created with C or D port IP fail to come up due to static routes not getting auto populated into the static route table (netstat -r) post card reload. Workaround: Re-configure the network routes for that card. The association will enter an active state once static routes are configured. |
| 35869016 | N | 3 | Update init-flash command to flash multiple cards with BLMCAP flash. | |
| 31557228 | Y | 4 | R46.9_ST: Inconsistent output for rept-stat-sccp:data=gtt | |
| 32825262 | N | 4 | R47.0_ST: ent-trace is displaying wrong info for ATI message if imei MBR set is applied | |
| 33772515 | Y | 4 | Measurement FTP issue after upgrade due to config mismatch at STP & Switch End | |
| 34617632 | N | 4 | Provide the encryption for DB backup and restore with removable media | |
| 34622237 | N | 4 | DEIR re-architecture remove EPAP functionality from DEIR card | |
| 34708191 | N | 4 | Decoding generic name from PIP when generic name tag(0xC7) is not present | |
| 34740778 | Y | 4 | False Alarm raised on primary SCCP card Port B with EPAP connectivity | |
| 35662731 | N | 4 | Uplift cJSON version to 1_7_16 | |
| 35799613 | N | 4 | Update EEDB to use TPD 7.8.8.0.0_89.31.0 |