Table of Contents
- Title and Copyright Information
- My Oracle Support (MOS)
- Acronyms
- What's New in This Guide
- 1 Introduction
-
2
Global Title Translation (GTT) Overview
- 2.1 Introduction
- 2.2 Global Title Translation Feature
- 2.3 Enhanced Global Title Translation Feature
- 2.4 Variable-length Global Title Translation Feature
- 2.5 Advanced GT Modification Feature
- 2.6 Intermediate GTT Load Sharing Feature
- 2.7 ANSI/ITU SCCP Conversion Feature
- 2.8 Support of SCCP XUDT Messages
- 2.9 In-Sequence Delivery of Class 1 UDT Messages
- 2.10 Flexible GTT Load Sharing
- 2.11 Origin-Based SCCP Routing
- 2.12 Hex Digit Support for GTT
- 2.13 Weighted GTT Load Sharing
- 2.14 Transaction-Based GTT Load Sharing
- 2.15 SCCP Loop Detection
- 2.16 Flexible Linkset Optional Based Routing
- 2.17 TCAP Opcode Based Routing
- 2.18 GTT Actions
- 2.19 Support for CAT2 SS7 Security
- 2.20 MTP Routed Global Title Translation
- 2.21 Unique GTT Selectors
- 2.22 XUDT UDT Conversion Feature
- 2.23 Upgrading from Global Title Translation (GTT) to Enhanced Global Title Translation (EGTT)
- 2.24 SCCP Overview
- 2.25 GTT Configuration
- 2.26 EGTT Configuration
- 2.27 Adding a Service Module
- 2.28 Removing a Service Module
- 2.29 Adding a Mapped SS7 Message Translation Type
- 2.30 Removing a Mapped SS7 Message Translation Type
- 2.31 Changing a Mapped SS7 Message Translation Type
- 2.32 Adding a Concerned Signaling Point Code
- 2.33 Removing a Concerned Signaling Point Code
- 2.34 Provisioning a Solitary Mated Application
- 2.35 Provisioning a Dominant Mated Application
- 2.36 Provisioning a Load Shared Mated Application
- 2.37 Provisioning a Combined Dominant/Load Shared Mated Application
- 2.38 Removing a Mated Application
- 2.39 Changing the Attributes of a Mated Application
- 2.40 Changing the Mated Application Type
- 2.41 Changing the Weight and In-Service Threshold Values of a Mated Application
- 2.42 Changing the MRNSET and MRN Point Code Values of MAP Entries
- 2.43 Provisioning MRN Entries
- 2.44 Removing MRN Entries
- 2.45 Changing the Relative Cost Values of MRN Entries
- 2.46 Changing MRN Entries with the ESWT Parameter
- 2.47 Changing the Weight and Threshold Values of MRN Entries
- 2.48 Changing the MAPSET, MAP Point Code, and MAP SSN Values of MRN Entries
- 2.49 Adding a GT Conversion Table Entry
- 2.50 Removing a GT Conversion Table Entry
- 2.51 Changing a GT Conversion Table Entry
- 2.52 Changing the ANSI/ITU SCCP Conversion Options
- 2.53 Changing SCCP Class 1 Sequencing Option
- 2.54 Changing the SCCP Alarm Thresholds
- 2.55 Changing the Transaction-Based GTT Load Sharing Options
- 2.56 Adding a Loopset
- 2.57 Removing a Loopset
- 2.58 Changing the Attributes of a Loopset
- 2.59 Configuring the ANSI to ITU-N SCCP Conversion Option
- 2.60 Configuring a SCCP Test Message
- 2.61 Adding Global Title Modification Information
- 2.62 Removing Global Title Modification Information
- 2.63 Changing Global Title Modification Information
- 2.64 Changing the MTP-Routed GTT Options
- 3 Global Title Translation (GTT) Configuration
-
4
Enhanced Global Title Translation (EGTT) Configuration
- 4.1 Introduction
- 4.2 Adding a GTT Set
- 4.3 Removing a GTT Set
- 4.4 Changing a GTT Set
- 4.5 Adding a GTT Selector
- 4.6 Removing a GTT Selector
- 4.7 Changing a GTT Selector
- 4.8 Adding Global Title Address Information
- 4.9 Removing Global Title Address Information
- 4.10 Changing Global Title Address Information
- 4.11 Changing the Default GTT Mode Options
- 4.12 Adding a GTT Action
- 4.13 Removing a GTT Action
- 4.14 Changing a GTT Action
- 4.15 Adding a GTT Action Set
- 4.16 Removing a GTT Action Set
- 4.17 Changing a GTT Action Set
- 4.18 Adding a GTT Action Path Entry
- 4.19 Removing a GTT Action Path Entry
- 4.20 Changing a GTT Action Path Entry
- 4.21 Changing the Unique GTT Selector Option
-
5
Controlled Feature Activation Procedures
- 5.1 Introduction
- 5.2 Activating the IGTTLS feature
- 5.3 Clearing a Temporary FAK Alarm
- 5.4 Turning Off the IGTTLS Feature
- 5.5 Enabling the XGTT Table Expansion Feature
- 5.6 Enabling the XMAP Table Expansion Feature
- 5.7 Activating the EPAP Data Split and Dual ExAP Configuration Features
- 5.8 Activating the EPAPX DB Expansion Feature
- 5.9 Activating the ANSI/ITU SCCP Conversion Feature
- 5.10 Activating the Flexible GTT Load Sharing Feature
- 5.11 Turning Off the Flexible GTT Load Sharing Feature
- 5.12 Activating the Origin-Based SCCP Routing Feature
- 5.13 Activating the Hex Digit Support for GTT Feature
- 5.14 Activating the Weighted GTT Load Sharing Feature
- 5.15 Activating the Transaction-Based GTT Load Sharing Feature
- 5.16 Activating the SCCP Loop Detection Feature
- 5.17 Activating the Throughput Capacity Feature
- 5.18 Activating the Advanced GT Modification Feature
- 5.19 Activating the GTT Load Sharing with Alternate Routing Indicator Feature
- 5.20 Turning Off the GTT Load Sharing with Alternate Routing Indicator Feature
- 5.21 Activating the Support for 16 GTT Lengths in VGTT Feature
- 5.22 Activating the Flexible Linkset Optional Based Routing Feature
- 5.23 Activating the TCAP Opcode Based Routing Feature
- 5.24 Enabling a TOBR Opcode Quantity
- 5.25 Activating the GTT Actions Features
- 5.26 Activating the XUDT UDT Conversion Feature
-
A
MO SMS B-Party Routing Configuration Procedures
- A.1 Introduction
- A.2 Activating the MO SMS B-Party Routing Feature
- A.3 Configuring the GSM MO SMS B-Party Routing Options
- A.4 Configuring the IS-41 MO SMS B-Party Routing Options
- A.5 Adding a Service Selector Entry for the MO SMS B-Party Routing Feature
- A.6 Removing a Service Selector Entry
- A.7 Changing the Attributes of a Service Selector Entry for the MO SMS B-Party Routing Feature
- A.8 Turning the MO SMS B-Party Routing Feature Off
-
B
MO SMS Prepaid Intercept on B-Party Configuration Procedures
- B.1 Introduction
- B.2 Activating the Prepaid SMS Intercept Phase 1 Feature
- B.3 Configuring the B-Party Check Option for the Prepaid SMS Intercept Phase 1 Feature
- B.4 Configuring Point Code Entries for the Prepaid SMS Intercept Phase 1 Feature
- B.5 Configuring GTA Entries for the Prepaid SMS Intercept Phase 1 Feature
- B.6 Turning Off the Prepaid SMS Intercept Phase 1 Feature