copy-tbl

Use this command to copy a single table from one source to another. A table can be copied to any verifiable location in the system; however, the source and destination tables must have identical configurations (same number of entries, same entry size, both 1- dimensional and 2-dimensional).

Note:

A table cannot be copied onto itself.

Parameters

dloc (mandatory)

Destination location. The location of the destination table.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

1114: TDM
1116: TDM
1113: Latched USB port
1115: Latched USB port

sloc (mandatory)

Source location. The location of the source table.

Range:

1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

1114: TDM
1116: TDM
1113: Latched USB port
1115: Latched USB port

stbl (mandatory)

Source table. The identifying number of the source table.

Range:: 0 - 1023

ddrv (optional)

Destination drive. The identification of the disk to which the table is copied.

Range:

fixed: The fixed disk
remove: The removable drive
usb: The flush-mounted (not-latched) USB port on the MASP card.

Default:

fixed

dprtngrp (optional)

Disk partition group. The disk partition group of the destination table.

Range:

active
inactive

Default:

active

dtbl (optional)

Destination table. The identifying number of the destination table.

Range:: 0 - 1023
Default:: The stbl parameter value

sdrv (optional)

Source drive. The identification of the disk from which the table is copied.

Range:

fixed: The fixed disk
remove: The removable drive
usb: The flush-mounted (not-latched) USB port on the MASP card.

Default:

fixed

sprtngrp (optional)

Source partition group. The disk partition group of the source table.

Range:

active
inactive

Default:

active

Example

copy-tbl:stbl=25:dtbl=24:sloc=1114:dloc=1116:sdrv=fixed

Dependencies

Only one table copy command can be executed at a time.

The source and destination tables must exist and be compatible.

This command cannot be used to modify the security log.

The same value cannot be specified for the sloc and dloc or the stbl and dtbl parameters.

If a value of fixed is specified for the sdrv or ddrv parameter, then a value of 1114 or 1116 must be specified for the sloc or dloc parameter.

This command cannot be entered when CAT2 IPSM to OAM syncing is in progress.

Notes

None

Output


		  copy-tbl:stbl=25:dtbl=24:sloc=1114:dloc=1116:sdrv=fixed


    rlghncxa03w 01-03-04 16:11:53 EST  Rel 28.1.0 
    Table copy command complete. 
;