A.10 Cards that use the ent-card Command
Table A-9 contains information about cards that use the
ent-card command for provisioning.
Table A-9 Valid Card Applications and Types
| Card Name (as shown on card label) | Part Number | Card Type (:type) | Application Type (:appl) | Maximum Cards in the Database |
|---|---|---|---|---|
| E5-APP-B |
870-3096-01 |
e5appb |
epap elap |
2
2 |
| E5-APP-B | 870-3096-02 | e5appb | lsms
nas imf |
2
1 255 |
|
E5-ATM-B |
870-2972-01 (R) |
limatm lime1atm |
atmansi atmitu |
180 if only one link is provisioned per card. A maximum of 180 links for either application can exist in the system. |
| E5-E1T1-B†† | 870-2970-01 |
lime1 limt1 |
ss7ansi ccs7itu |
250 for each application |
|
E5-ENET-B |
870-2971-01 (R) |
dcm enet enetb stc |
ss7ipgw ipgwi iplimi eroute ips ipsg |
125 for IPGWx 125 for IPLIMx 100 for ipsg 32 for eroute |
|
E5-MCPM-B* |
870-3089-01 (R) |
mcpm |
mcp |
250 |
|
E5-SM4G*** |
870-2860-01 (R) 870-2860-02 (R) |
dsm |
vsccp |
18 for use with ELAP 32 for use with EPAP |
|
E5-SM8G-B*** |
870-2990-01 (R) |
dsm |
vsccp |
18 for use with ELAP 32 for use with EPAP |
|
E5-SM8G-B*** |
870-2990-01 (R) |
dsm |
siphc deirhc enumhc |
16 of the E5-SM8G-B cards connected to ELAP or EPAP for siphc and deirhc 16 of the E5-SM8G-B cards connected to EPAP for enumhc |
|
E5-TSM |
870-2943-03 (R) |
tsm |
gls |
8 |
|
SLIC |
|
slic |
ipsg siphc deirhc enumhc vsccp sfapp |
40 for use as GTT on IPSG 75 for use as GTT-disabled IPSG 40 for use as Service Module cards |
|
TELCO |
870-2904-01 |
telco |
switch |
136 |
|
* Though the system allows 250 MCPM cards, practical usage is 2. *** If any MPS-based features are running in the system, up to 25 Service Modules are allowed in the system. If only GTT is running, up to 32 Service Modules can be used in the system with the 50,000 GTT feature. † † For the E1 or T1 interface, either SS7 application (SS7ANSI or CCS7ITU) can be assigned to these cards. For more information on the E1 or T1 interface go to Appendix A "E1 Interface" or Appendix B "T1 Interface” in the Database Administration - SS7 User's Guide. Part numbers followed by (R) are ROHS numbers. These numbers are equivalent to the non-ROHS numbers that they are paired with. ***Connectivity to a TekServer 3 (T1200) with EPAP 13.0 or higher or connectivity to an E5-APP-B card with EPAP 15.0 or higher is required for more than 25 Service Module cards. |
||||