5 V-Flex Measurements
This chapter describes the measurements that can be collected and generated for the V-Flex feature.
V-Flex Measurements
- The Measurements Platform feature enabled and the Measurements Platform collection option on
- The E5-OAM Integrated Measurements feature enabled and on and the E5-OAM Integrated Measurements collection option on
OAM-based (UI) measurements are not available for V-Flex.
Refer to Measurements Reference for descriptions of collection methods, measurements, measurements reports, and detailed measurement usage information.
Refer to Commands User's Guide for descriptions of the commands used to enable and turn on features, turn on measurements collection options, and schedule and generate measurements reports.
Refer to the procedures in Database Administration - System Management User's Guide for configuring the Measurements Platform feature, EAGLE Integrated Measurements feature. the EAGLE OA&M IP Security feature in the EAGLE.
The EAGLE Measurement system supports the collection and retrieval of measurements related to the V-Flex Voice Mail Router (V-Flex) feature. The V-Flex measurement registers are supported only with the Measurements Platform feature enabled and the Measurements Platform collection option on.
There are five measurement registers specifically for the V-Flex feature (see Table 5-1 and Table 5-2). The registers are reported in two new V-Flex reports (VFLX_SYS and VFLX_SSP) that have been added to the Hourly Maintenance Measurements (MTCH) report and Daily Maintenance Measurements (MTCD) report.
The data for these registers originates in the Service Module cards. The FTP interface to the customer’s network transfers the V-Flex MTCH and V-Flex MTCD reports to a customer FTP server. Following collection, scheduled reports are automatically generated and transferred to the customer's FTP server.
Refer to the procedure in Database Administration - System Management User's Guide for configuring the Measurements Platform feature in the EAGLE.
When the V-Flex feature is on, the MCP application collects V-Flex measurements data each hour following the hour boundary (0000, 0100, 0200, etc.). The collected data is retained in the appropriate data store. The retention period for hourly V-Flex measurements data is 24 hours. The V-Flex measurements data collected each hour is aggregated into a daily sum total that is reported in the MTCD report. The retention period for daily V-Flex measurements data is 7 days.
Existing FTP file server reports are overwritten by subsequent requests that produce the identical file name.
Reports can be generated on demand. The rept-ftp-meas
command is used to generate and FTP transfer reports on demand. Refer to Commands User's Guide for descriptions of the commands used for V-Flex measurements.
Table 5-1 Pegs for Per System V-Flex Measurements
Event Name | Description | Type | Unit |
---|---|---|---|
VFIDPQRCV |
Total number of IDP queries received for the V-Flex service. |
System |
Peg count |
VFCNCTRSP |
Total number of IDP Connect responses sent by the V-Flex service. |
System |
Peg count |
VFERRRSP |
Total number of IDP queries received that resulted in TCAP Error response from the V-Flex service. |
System |
Peg count |
Table 5-2 Pegs for Per SSP V-Flex Measurements
Event Name | Description | Type | Unit |
---|---|---|---|
VFVMSISDN |
Total number of IDP queries received for the V-Flex service with a valid MSISDN and known OPC. |
Per-SSP |
Peg count |
VFIMSISDN |
Total number of IDP queries received for the V-Flex service with a invalid MSISDN and known OPC. |
Per-SSP |
Peg count |