4 MTP Tables

This chapter describes MTP table data reports.

Card (rtrv-card)

The output content for the rtrv-card command is shown in Table 4-1.

Table 4-1 Output Content for rtrv-card

Field Name Description Data
LOC Card Location Integer
TYPE Card Type ASCII Text
APPL Application software running on this card ASCII Text
DATA Data type provisioned for this card ASCII Text
LSET(SLC)-A Port A linkset name and signal link code ASCII Text
LSET(SLC)-B Port B linkset name and signal link code ASCII Text
LSET(SLC)-A1 Port A1 linkset name and signal link code ASCII Text
LSET(SLC)-B1 Port B1 linkset name and signal link code ASCII Text
LSET(SLC)-A2 Port A2 linkset name and signal link code ASCII Text
LSET(SLC)-B2 Port B2 linkset name and signal link code ASCII Text
LSET(SLC)-A3 Port A3 linkset name and signal link code ASCII Text
LSET(SLC)-B3 Port B3 linkset name and signal link code ASCII Text
LSET(SLC)-A4 Link A4 linkset name and signal link code ASCII Text
LSET(SLC)-B4 Link B4 linkset name and signal link code ASCII Text
LSET(SLC)-A5 Link A5 linkset name and signal link code ASCII Text
LSET(SLC)-B5 Link B5 linkset name and signal link code ASCII Text
LSET(SLC)-A6 Link A6 linkset name and signal link code ASCII Text
LSET(SLC)-B6 Link B6 linkset name and signal link code ASCII Text
LSET(SLC)-A7 Link A7 linkset name and signal link code ASCII Text
LSET(SLC)-B7 Link B7 linkset name and signal link code ASCII Text
LSET(SLC)-A8 Link A8 linkset name and signal link code ASCII Text
LSET(SLC)-B8 Link B8 linkset name and signal link code ASCII Text
LSET(SLC)-A9 Link A9 linkset name and signal link code ASCII Text
LSET(SLC)-B9 Link B9 linkset name and signal link code ASCII Text
LSET(SLC)-A10 Link A10 linkset name and signal link code ASCII Text
LSET(SLC)-B10 Link B10 linkset name and signal link code ASCII Text
LSET(SLC)-A11 Link A11 linkset name and signal link code ASCII Text
LSET(SLC)-B11 Link B11 linkset name and signal link code ASCII Text
LSET(SLC)-A12 Link A12 linkset name and signal link code ASCII Text
LSET(SLC)-B12 Link B12 linkset name and signal link code ASCII Text
LSET(SLC)-A13 Link A13 linkset name and signal link code ASCII Text
LSET(SLC)-B13 Link B13 linkset name and signal link code ASCII Text
LSET(SLC)-A14 Link A14 linkset name and signal link code ASCII Text
LSET(SLC)-B14 Link B14 linkset name and signal link code ASCII Text
LSET(SLC)-A15 Link A15 linkset name and signal link code ASCII Text
LSET(SLC)-B15 Link B15 linkset name and signal link code ASCII Text
LSET(SLC)-A16 Link A16 linkset name and signal link code ASCII Text
LSET(SLC)-B16 Link B16 linkset name and signal link code ASCII Text
LSET(SLC)-A17 Link A17 linkset name and signal link code ASCII Text
LSET(SLC)-B17 Link B17 linkset name and signal link code ASCII Text
LSET(SLC)-A18 Link A18 linkset name and signal link code ASCII Text
LSET(SLC)-B18 Link B18 linkset name and signal link code ASCII Text
LSET(SLC)-A19 Link A19 linkset name and signal link code ASCII Text
LSET(SLC)-B19 Link B19 linkset name and signal link code ASCII Text
LSET(SLC)-A20 Link A20 linkset name and signal link code ASCII Text
LSET(SLC)-B20 Link B20 linkset name and signal link code ASCII Text
LSET(SLC)-A21 Link A21 linkset name and signal link code ASCII Text
LSET(SLC)-B21 Link B21 linkset name and signal link code ASCII Text
LSET(SLC)-A22 Link A22 linkset name and signal link code ASCII Text
LSET(SLC)-B22 Link B22 linkset name and signal link code ASCII Text
LSET(SLC)-A23 Link A23 linkset name and signal link code ASCII Text
LSET(SLC)-B23 Link B23 linkset name and signal link code ASCII Text
LSET(SLC)-A24 Link A24 linkset name and signal link code ASCII Text
LSET(SLC)-B24 Link B24 linkset name and signal link code ASCII Text
LSET(SLC)-A25 Link A25 linkset name and signal link code ASCII Text
LSET(SLC)-B25 Link B25 linkset name and signal link code ASCII Text
LSET(SLC)-A26 Link A26 linkset name and signal link code ASCII Text
LSET(SLC)-B26 Link B26 linkset name and signal link code ASCII Text
LSET(SLC)-A27 Link A27 linkset name and signal link code ASCII Text
LSET(SLC)-B27 Link B27 linkset name and signal link code ASCII Text
LSET(SLC)-A28 Link A28 linkset name and signal link code ASCII Text
LSET(SLC)-B28 Link B28 linkset name and signal link code ASCII Text
LSET(SLC)-A29 Link A29 linkset name and signal link code ASCII Text
LSET(SLC)-B29 Link B29 linkset name and signal link code ASCII Text
LSET(SLC)-A30 Link A30 linkset name and signal link code ASCII Text
LSET(SLC)-B30 Link B30 linkset name and signal link code ASCII Text
LSET(SLC)-A31 Link A31 linkset name and signal link code ASCII Text
LSET(SLC)-B31 Link B31 linkset name and signal link code ASCII Text
LSET(SLC)-A32 Link A32 linkset name and signal link code ASCII Text
LSET(SLC)-B32 Link B32 linkset name and signal link code ASCII Text
LSET(SLC)-A33 Link A33 linkset name and signal link code ASCII Text
LSET(SLC)-B33 Link B33 linkset name and signal link code ASCII Text
LSET(SLC)-A34 Link A34 linkset name and signal link code ASCII Text
LSET(SLC)-B34 Link B34 linkset name and signal link code ASCII Text
LSET(SLC)-A35 Link A35 linkset name and signal link code ASCII Text
LSET(SLC)-B35 Link B35 linkset name and signal link code ASCII Text
LSET(SLC)-A36 Link A36 linkset name and signal link code ASCII Text
LSET(SLC)-B36 Link B36 linkset name and signal link code ASCII Text
LSET(SLC)-A37 Link A37 linkset name and signal link code ASCII Text
LSET(SLC)-B37 Link B37 linkset name and signal link code ASCII Text
LSET(SLC)-A38 Link A38 linkset name and signal link code ASCII Text
LSET(SLC)-B38 Link B38 linkset name and signal link code ASCII Text
LSET(SLC)-A39 Link A39 linkset name and signal link code ASCII Text
LSET(SLC)-B39 Link B39 linkset name and signal link code ASCII Text
LSET(SLC)-A40 Link A40 linkset name and signal link code ASCII Text
LSET(SLC)-B40 Link B40 linkset name and signal link code ASCII Text
LSET(SLC)-A41 Link A41 linkset name and signal link code ASCII Text
LSET(SLC)-B41 Link B41 linkset name and signal link code ASCII Text
LSET(SLC)-A42 Link A42 linkset name and signal link code ASCII Text
LSET(SLC)-B42 Link B42 linkset name and signal link code ASCII Text
LSET(SLC)-A43 Link A43 linkset name and signal link code ASCII Text
LSET(SLC)-B43 Link B43 linkset name and signal link code ASCII Text
LSET(SLC)-A44 Link A44 linkset name and signal link code ASCII Text
LSET(SLC)-B44 Link B44 linkset name and signal link code ASCII Text
LSET(SLC)-A45 Link A45 linkset name and signal link code ASCII Text
LSET(SLC)-B45 Link B45 linkset name and signal link code ASCII Text
LSET(SLC)-A46 Link A46 linkset name and signal link code ASCII Text
LSET(SLC)-B46 Link B46 linkset name and signal link code ASCII Text
LSET(SLC)-A47 Link A47 linkset name and signal link code ASCII Text
LSET(SLC)-B47 Link B47 linkset name and signal link code ASCII Text
LSET(SLC)-A48 Link A48 linkset name and signal link code ASCII Text
LSET(SLC)-B48 Link B48 linkset name and signal link code ASCII Text
LSET(SLC)-A49 Link A49 linkset name and signal link code ASCII Text
LSET(SLC)-B49 Link B49 linkset name and signal link code ASCII Text
LSET(SLC)-A50 Link A50 linkset name and signal link code ASCII Text
LSET(SLC)-B50 Link B50 linkset name and signal link code ASCII Text
LSET(SLC)-A51 Link A51 linkset name and signal link code ASCII Text
LSET(SLC)-B51 Link B51 linkset name and signal link code ASCII Text
LSET(SLC)-A52 Link A52 linkset name and signal link code ASCII Text
LSET(SLC)-B52 Link B52 linkset name and signal link code ASCII Text
LSET(SLC)-A53 Link A53 linkset name and signal link code ASCII Text
LSET(SLC)-B53 Link B53 linkset name and signal link code ASCII Text
LSET(SLC)-A54 Link A54 linkset name and signal link code ASCII Text
LSET(SLC)-B54 Link B54 linkset name and signal link code ASCII Text
LSET(SLC)-A55 Link A55 linkset name and signal link code ASCII Text
LSET(SLC)-B55 Link B55 linkset name and signal link code ASCII Text
LSET(SLC)-A56 Link A56 linkset name and signal link code ASCII Text
LSET(SLC)-B56 Link B56 linkset name and signal link code ASCII Text
LSET(SLC)-A57 Link A57 linkset name and signal link code ASCII Text
LSET(SLC)-B57 Link B57 linkset name and signal link code ASCII Text
LSET(SLC)-A58 Link A58 linkset name and signal link code ASCII Text
LSET(SLC)-B58 Link B58 linkset name and signal link code ASCII Text
LSET(SLC)-A59 Link A59 linkset name and signal link code ASCII Text
LSET(SLC)-B59 Link B59 linkset name and signal link code ASCII Text
LSET(SLC)-A60 Link A60 linkset name and signal link code ASCII Text
LSET(SLC)-B60 Link B60 linkset name and signal link code ASCII Text
LSET(SLC)-A61 Link A61 linkset name and signal link code ASCII Text
LSET(SLC)-B62 Link B61 linkset name and signal link code ASCII Text
LSET(SLC)-A62 Link A62 linkset name and signal link code ASCII Text
LSET(SLC)-B62 Link B62 linkset name and signal link code ASCII Text
LSET(SLC)-A63 Link A63 linkset name and signal link code ASCII Text
LSET(SLC)-B63 Link B63 linkset name and signal link code ASCII Text

All entries do not have exactly the same number of data fields; the number of data fields is related to card type and application. For most card type and application combinations, the number of data fields is five, except as shown in Table 4-2.

Table 4-2 Exceptions to Number of Data Fields per Card Type

Card Type Application Number of Data Fields
E5-MCAP OAM 3
DCM IPLIM/IPLIMI 11
LIMT1 SS7ANSI/CCS7ITU Determined by the HC-MIM SLK Capacity feature quantity key (see note below)
LIME1 SS7ANSI/CCS7ITU Determined by the HC-MIM SLK Capacity feature quantity key (see note below)

Note:

The csv output of the rtrv-card command might differ from the EAGLE output. For LIME1 and LIMT1 cards, the number of links displayed is determined by the HC-MIM SLK Capacity feature quantity key as follows:
  • If the HC-MIM SLK Capacity feature 64 quantity key is enabled, a LIME1/T1 card will show link data for A through B31.

Example output file name: card_20031002_1338.csv

Abbreviated example output file format:

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"

"tklc1090201","EAGLE 46.5.0.0.0-70.32.0","1579","2017-05-17","01:24:04","2017-05-17","01:07:49","EST","CARD","15","256","6%"

"LOC","TYPE","APPL","DATA","LSET(SLC)-A","LSET(SLC)-B","LSET(SLC)-A1","LSET(SLC)-
B1","LSET(SLC)-A2","LSET(SLC)-B2","LSET(SLC)-A3","LSET(SLC)-B3","LSET(SLC)-
A4","LSET(SLC)-B4","LSET(SLC)-A5","LSET(SLC)-B5","LSET(SLC)-A6","LSET(SLC)-
B6","LSET(SLC)-A7","LSET(SLC)-B7","LSET(SLC)-A8","LSET(SLC)-B8","LSET(SLC)-
A9","LSET(SLC)-B9","LSET(SLC)-A10","LSET(SLC)-B10","LSET(SLC)-A11","LSET(SLC)-
B11","LSET(SLC)-A12","LSET(SLC)-B12","LSET(SLC)-A13","LSET(SLC)-B13","LSET(SLC)-
A14","LSET(SLC)-B14","LSET(SLC)-A15","LSET(SLC)-B15","LSET(SLC)-A16","LSET(SLC)-
B16","LSET(SLC)-A17","LSET(SLC)-B17","LSET(SLC)-A18","LSET(SLC)-B18","LSET(SLC)-
A19","LSET(SLC)-B19","LSET(SLC)-A20","LSET(SLC)-B20","LSET(SLC)-A21","LSET(SLC)-
B21","LSET(SLC)-A22","LSET(SLC)-B22","LSET(SLC)-A23","LSET(SLC)-B23","LSET(SLC)-
A24","LSET(SLC)-B24","LSET(SLC)-A25","LSET(SLC)-B25","LSET(SLC)-A26","LSET(SLC)-
B26","LSET(SLC)-A27","LSET(SLC)-B27","LSET(SLC)-A28","LSET(SLC)-B28","LSET(SLC)-
A29","LSET(SLC)-B29","LSET(SLC)-A30","LSET(SLC)-B30","LSET(SLC)-A31","LSET(SLC)-
B31","LSET(SLC)-A32","LSET(SLC)-B32","LSET(SLC)-A33","LSET(SLC)-B33","LSET(SLC)-
A34","LSET(SLC)-B34","LSET(SLC)-A35","LSET(SLC)-B35","LSET(SLC)-A36","LSET(SLC)-
B36","LSET(SLC)-A37","LSET(SLC)-B37","LSET(SLC)-A38","LSET(SLC)-B38","LSET(SLC)-
A39","LSET(SLC)-B39","LSET(SLC)-A40","LSET(SLC)-B40","LSET(SLC)-A41","LSET(SLC)-
B41","LSET(SLC)-A42","LSET(SLC)-B42","LSET(SLC)-A43","LSET(SLC)-B43","LSET(SLC)-
A44","LSET(SLC)-B44","LSET(SLC)-A45","LSET(SLC)-B45","LSET(SLC)-A46","LSET(SLC)-
B46","LSET(SLC)-A47","LSET(SLC)-B47","LSET(SLC)-A48","LSET(SLC)-B48","LSET(SLC)-
A49","LSET(SLC)-B49","LSET(SLC)-A50","LSET(SLC)-B50","LSET(SLC)-A51","LSET(SLC)-
B51","LSET(SLC)-A52","LSET(SLC)-B52","LSET(SLC)-A53","LSET(SLC)-B53","LSET(SLC)-
A54","LSET(SLC)-B54","LSET(SLC)-A55","LSET(SLC)-B55","LSET(SLC)-A56","LSET(SLC)-
B56","LSET(SLC)-A57","LSET(SLC)-B57","LSET(SLC)-A58","LSET(SLC)-B58","LSET(SLC)-
A59","LSET(SLC)-B59","LSET(SLC)-A60","LSET(SLC)-B60","LSET(SLC)-A61","LSET(SLC)-
B61","LSET(SLC)-A62","LSET(SLC)-B62","LSET(SLC)-A63","LSET(SLC)-B63"

1101,"DCM","IPLIMI",,"ls1101      (0)",,,,,,,,,,,,,,,
1103,"DCM","IPGWI",,"ls1103      (0)",
1104,"IPSM","IPS",,,
1106,”ENETB”,”IPSG”,”GTT”,gttlsn0b    (0),,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1107,"SLIC","IPSG","NOSCCP","ls1107a00   (0)","ls1107a04   (0)","ls1107a00   
(1)","ls1107a04   (1)","ls1107a00   (2)","ls1107a04   (2)","ls1107a00   
(3)","ls1107a04   (3)","ls1107a00   (4)","ls1107a04   (4)","ls1107a00   
(5)","ls1107a04   (5)","ls1107a00   (6)","ls1107a04   (6)","ls1107a00   
(7)","ls1107a04   (7)","ls1107a00   (8)","ls1107a04   (8)","ls1107a00   
(9)","ls1107a04   (9)","ls1107a00   (10)","ls1107a04   (10)","ls1107a00   
(11)","ls1107a04   (11)","ls1107a00   (12)","ls1107a04   (12)","ls1107a00   
(13)","ls1107a04   (13)","ls1107a00   (14)","ls1107a04   (14)","ls1107a00   
(15)","ls1107a04   (15)","ls1107a01   (0)","ls1107a05   (0)","ls1107a01   
(1)","ls1107a05   (1)","ls1107a01   (2)","ls1107a05   (2)","ls1107a01   
(3)","ls1107a05   (3)","ls1107a01   (4)","ls1107a05   (4)","ls1107a01   
(5)","ls1107a05   (5)","ls1107a01   (6)","ls1107a05   (6)","ls1107a01   
(7)","ls1107a05   (7)","ls1107a01   (8)","ls1107a05   (8)","ls1107a01   
(9)","ls1107a05   (9)","ls1107a01   (10)","ls1107a05   (10)","ls1107a01   
(11)","ls1107a05   (11)","ls1107a01   (12)","ls1107a05   (12)","ls1107a01   
(13)","ls1107a05   (13)","ls1107a01   (14)","ls1107a05   (14)","ls1107a01   
(15)","ls1107a05   (15)","ls1107a02   (0)","ls1107a06   (0)","ls1107a02   
(1)","ls1107a06   (1)","ls1107a02   (2)","ls1107a06   (2)","ls1107a02   
(3)","ls1107a06   (3)","ls1107a02   (4)","ls1107a06   (4)","ls1107a02   
(5)","ls1107a06   (5)","ls1107a02   (6)","ls1107a06   (6)","ls1107a02   
(7)","ls1107a06   (7)","ls1107a02   (8)","ls1107a06   (8)","ls1107a02   
(9)","ls1107a06   (9)","ls1107a02   (10)","ls1107a06   (10)","ls1107a02   
(11)","ls1107a06   (11)","ls1107a02   (12)","ls1107a06   (12)","ls1107a02   
(13)","ls1107a06   (13)","ls1107a02   (14)","ls1107a06   (14)","ls1107a02   
(15)","ls1107a06   (15)","ls1107a03   (0)","ls1107a07   (0)","ls1107a03   
(1)","ls1107a07   (1)","ls1107a03   (2)","ls1107a07   (2)","ls1107a03   
(3)","ls1107a07   (3)","ls1107a03   (4)","ls1107a07   (4)","ls1107a03   
(5)","ls1107a07   (5)","ls1107a03   (6)","ls1107a07   (6)","ls1107a03   
(7)","ls1107a07   (7)","ls1107a03   (8)","ls1107a07   (8)","ls1107a03   
(9)","ls1107a07   (9)","ls1107a03   (10)","ls1107a07   (10)","ls1107a03   
(11)","ls1107a07   (11)","ls1107a03   (12)","ls1107a07   (12)","ls1107a03   
(13)","ls1107a07   (13)","ls1107a03   (14)","ls1107a07   (14)","ls1107a03   
(15)","ls1107a07   (15)"
1108,"SLIC","IPSG","NOSCCP","ls1108i00   (0)","ls1108i04   (0)","ls1108i00   
(1)","ls1108i04   (1)","ls1108i00   (2)","ls1108i04   (2)","ls1108i00   
(3)","ls1108i04   (3)","ls1108i00   (4)","ls1108i04   (4)","ls1108i00   
(5)","ls1108i04   (5)","ls1108i00   (6)","ls1108i04   (6)","ls1108i00   
(7)","ls1108i04   (7)","ls1108i00   (8)","ls1108i04   (8)","ls1108i00   
(9)","ls1108i04   (9)","ls1108i00   (10)","ls1108i04   (10)","ls1108i00   
(11)","ls1108i04   (11)","ls1108i00   (12)","ls1108i04   (12)","ls1108i00   
(13)","ls1108i04   (13)","ls1108i00   (14)","ls1108i04   (14)","ls1108i00   
(15)","ls1108i04   (15)","ls1108i01   (0)","ls1108i05   (0)","ls1108i01   
(1)","ls1108i05   (1)","ls1108i01   (2)","ls1108i05   (2)","ls1108i01   
(3)","ls1108i05   (3)","ls1108i01   (4)","ls1108i05   (4)","ls1108i01   
(5)","ls1108i05   (5)","ls1108i01   (6)","ls1108i05   (6)","ls1108i01   
(7)","ls1108i05   (7)","ls1108i01   (8)","ls1108i05   (8)","ls1108i01   
(9)","ls1108i05   (9)","ls1108i01   (10)","ls1108i05   (10)","ls1108i01   
(11)","ls1108i05   (11)","ls1108i01   (12)","ls1108i05   (12)","ls1108i01   
(13)","ls1108i05   (13)","ls1108i01   (14)","ls1108i05   (14)","ls1108i01   
(15)","ls1108i05   (15)","ls1108i02   (0)","ls1108i06   (0)","ls1108i02   
(1)","ls1108i06   (1)","ls1108i02   (2)","ls1108i06   (2)","ls1108i02   
(3)","ls1108i06   (3)","ls1108i02   (4)","ls1108i06   (4)","ls1108i02   
(5)","ls1108i06   (5)","ls1108i02   (6)","ls1108i06   (6)","ls1108i02   
(7)","ls1108i06   (7)","ls1108i02   (8)","ls1108i06   (8)","ls1108i02   
(9)","ls1108i06   (9)","ls1108i02   (10)","ls1108i06   (10)","ls1108i02   
(11)","ls1108i06   (11)","ls1108i02   (12)","ls1108i06   (12)","ls1108i02   
(13)","ls1108i06   (13)","ls1108i02   (14)","ls1108i06   (14)","ls1108i02   
(15)","ls1108i06   (15)","ls1108i03   (0)","ls1108i07   (0)","ls1108i03   
(1)","ls1108i07   (1)","ls1108i03   (2)","ls1108i07   (2)","ls1108i03   
(3)","ls1108i07   (3)","ls1108i03   (4)","ls1108i07   (4)","ls1108i03   
(5)","ls1108i07   (5)","ls1108i03   (6)","ls1108i07   (6)","ls1108i03   
(7)","ls1108i07   (7)","ls1108i03   (8)","ls1108i07   (8)","ls1108i03   
(9)","ls1108i07   (9)","ls1108i03   (10)","ls1108i07   (10)","ls1108i03   
(11)","ls1108i07   (11)","ls1108i03   (12)","ls1108i07   (12)","ls1108i03   
(13)","ls1108i07   (13)","ls1108i03   (14)","ls1108i07   (14)","ls1108i03   
(15)","ls1108i07   (15)"
1113,"E5MCAP","OAM"
1114,"TDM-A",""
1115,"E5MCAP","OAM"
1116,"TDM-B",""
1117,"MDAL",""
1201,"DSM","VSCCP",
1211,"MCPM","MCP",,,
1217,"DSM","VSCCP",

Maximum File Size

Assuming that the maximum number of cards equipped in system is 255:

  • HC-MIM SLK Capacity feature not enabled:
    250 (System header) +  268 (Report header) + 312 X 255 cards (Report data) = 80,078 bytes
  • HC-MIM SLK Capacity feature 24 quantity key enabled:
    250 (System header) +  396 (Report header) + 464 X 255 cards (Report data) = 118,966 bytes
  • HC-MIM SLK Capacity feature 32 quantity key enabled:
    250 (System header) +  524 (Report header) + 616 X 255 cards (Report data) = 157,854 bytes
  • HC-MIM SLK Capacity feature 40 quantity key enabled:
    250 (System header) +  652 (Report header) + 768 X 255 cards (Report data) = 196,742 bytes
  • HC-MIM SLK Capacity feature 48 quantity key enabled:
    250 (System header) +  780 (Report header) + 920 X 255 cards (Report data) = 235,630 bytes
  • HC-MIM SLK Capacity feature 56 quantity key enabled:
    250 (System header) +  908 (Report header) + 1072 X 255 cards (Report data) = 274,518 bytes
  • HC-MIM SLK Capacity feature 64 quantity key enabled:
    250 (System header) +  1036 (Report header) + 1224 X 255 cards (Report data) = 313,406 bytes

Site ID (rtrv-sid)

The output content for rtrv-sid lists the self-identity destination point code (DPC), CLLI, and capability point codes associated with the STP in its active database.

Table 4-3 Output Content for rtrv-sid

Field Name Description Data
PCA ANSI Point Code ASCII Text
PCI ITU-International Point Code ASCII Text
PCN ITU-National Point Code ASCII Text
PCN24 ITU-National 24 bit Point Code ASCII Text
PCN16 ITU-National 16 bit Point Code ASCII Text
PCI-S ITU-International Spare Point Code ASCII Text
PCN-S ITU-National Spare Point Code ASCII Text
CLLI Common Language Location Identifier ASCII Text
PCTYPE Point Code Type ASCII Text
CPC(STP) Capability Point Code for STP ASCII Text
CPC(LNP) Capability Point Code for LNP ASCII Text
CPC(INP) Capability Point Code for INP ASCII Text
CPC(EIR) Capability Point Code for EIR ASCII Text
CPC(GFLEX) Capability Point Code for GFLEX ASCII Text
CPC(MNP) Capability Point Code for MNP ASCII Text
CPC(VFLEX) Capability Point Code for VFLEX ASCII Text
CPC(ATINPQ) Capability Point Code for ATINP ASCII Text

Example output file: sid_20031002_1338.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 41.0.0-62.27.0”,”1362156”,”2009-05-19”,”13:38:15”,​”2009-05-19”,”15:49:16”,”Eastern Standard Time”,”SITE ID”,”1”,”1”,”100%”<cr><lf>

“PCA”,”PCI”,”PCN”,”PCN24”,”PCI-S”,”PCN-S”,”CLLI”,”PCTYPE”,”CPC (STP)”,”CPC (LNP)”,​”CPC (INP)”,”CPC (EIR)”,“CPC (GFLEX)”, “CPC (MNP)”,“CPC (VFLEX)”,”CPC (ATINPQ)”<cr><lf>
“   008-060-008”,”-----------“,”-----------“,”-----------“,” s-1-001-2”,” s-00100”,​”e1110501”,”ANSI”,”   008-060-001    100-100-100 “,”   008-060-000    008-060-002 “,””,”   123”,“   2-101-1  s-2-101-1    102”,“   2-201-1  s-2-202-1  s-2-301-1    203  s-203”<cr><lf>

J7 Point code Support Example: sid_20020304_2041.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25",​"15:04:13",​"India Standard Time","SITE ID","1","1","100%"

"PCA","PCI","PCN","PCN24","PCN16","PCI-S","PCN-S","CLLI","PCTYPE","CPC (STP)","CPC (LNP)","CPC (INP)","CPC (EIR)","CPC (GFLEX)","CPC (MNP)","CPC (VFLEX)","CPC (ATINPQ)"
"--------------","   1-001-0","   12345","-----------","   001-14-00"," s-2-003-4"," s-12343","eagle3","OTHER","   1-002-3    13245    008-08-08 ","","","","","","",""

Example: sid_20191218_2022.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"e1111201","EAGLE 47.0.0.0.0-78.8.0","798187","2019-12-18","20:22:18","2021-03-18","02:11:14","Eastern Standard Time","SITE ID","1","1","100%"

"PCA","PCI","PCN","PCN24","PCN16","PCI-S","PCN-S","CLLI","PCTYPE","CPC (STP)","CPC (LNP)","CPC (INP)","CPC (EIR)","CPC (GFLEX)","CPC (MNP)","CPC (VFLEX)","CPC (ATINPQ)"
"005-020-005","5-010-5","5-010-5-aa","-----------","--------------","s-5-010-5","s-5-010-5-aa","e1111201","ANSI","5-011-0 5-012-2 5-015-2 5-016-2 5-018-2 5-050-2 s-5-011-0 5-011-0-aa 5-012-2-aa 5-015-2-aa 5-016-2-aa 5-018-2-aa 5-050-2-aa 5-012-2-bc 5-015-2-bc 5-016-2-bc 5-018-2-bc 5-050-2-bc s-5-011-0-aa ","","5-012-0 5-012-1 5-050-0 5-050-1 s-5-012-0 s-5-050-0 5-012-0-aa 5-012-1-aa 5-050-0-aa 5-050-1-aa 5-012-0-bc 5-012-1-bc 5-050-0-bc 5-050-1-bc s-5-012-0-aa s-5-050-0-aa s-5-012-0-bc s-5-050-0-bc ","","5-015-0 5-015-1 s-5-015-0 5-015-0-aa 5-015-1-aa 5-015-0-bc 5-015-1-bc s-5-015-0-aa s-5-015-0-bc ","5-016-0 5-016-1 s-5-016-0 5-016-0-aa 5-016-1-aa 5-016-0-bc 5-016-1-bc s-5-016-0-aa s-5-016-0-bc ","","5-018-0 5-018-1 s-5-018-0 5-018-0-aa 5-018-1-aa 5-018-0-bc 5-018-1-bc s-5-018-0-aa s-5-018-0-bc "
""

Maximum File Size

System header + Report header + Report data
250 + 170 + 500 = 920 bytes

Feature (rtrv-feat)

The output content for rtrv-feat lists the features provisioned in the EAGLE system.

Table 4-4 Output Content for rtrv-feat

Field Name Description Data
FEATNAME Feature Name ASCII Text
STATUS Status, can be either ON or OFF ASCII Text

Example output file name: feat_20020505_1550.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 38.0.0-60.3.0”,”820”,” 2007-08-07”,”15:50:04”,” 2007-08-07”,​”10:50:37”,”EASTERN STANDARD TIME”,”SYSTEM FEATURE”,26,26,”100%”<cr><lf>
<cr><lf>
“FEATNAME”,”STATUS”<cr><lf>
 
“GTT”,”ON”<cr><lf>
“GWS”,”OFF”<cr><lf>
“NRT”,”OFF”<cr><lf>
 “LAN”,”OFF”<cr><lf>
“CRMD”,”OFF”<cr><lf>
 “LFS”,”OFF”<cr><lf>
“MTPRS”,”OFF”<cr><lf>
“FAN”,”OFF”<cr><lf>
“DSTN5000”,”OFF”<cr><lf>
“WNP”,”OFF”<cr><lf>
“CNCF”,”OFF”<cr><lf>
“TLNP”,”OFF”<cr><lf>
“SCCPCNV”,”OFF”<cr><lf>
“TCAPCNV”,”OFF”<cr><lf>
“IPISUP”,”OFF”<cr><lf>
 “PLNP”,”OFF”<cr><lf>
“NCR”,”OFF”<cr><lf>
“ITUMTPRS”,”OFF”<cr><lf>
“SLSOCB”,”OFF”<cr><lf>
“EGTT”,”OFF”<cr><lf>
“VGTT”,”OFF”<cr><lf>
 “MPC”,”OFF”<cr><lf>
“ITUDUPPC”,”OFF”<cr><lf>
“MEASPLAT”,”OFF”<cr><lf>
“TSCSYNC”,”OFF”<cr><lf>
“E5IS”,”OFF”<cr><lf>

Maximum File Size

System header + Report header + Report data
   250 + 19 + 20 x 26 features = 789 bytes

Controlled Feature (rtrv-ctrl-feat)

The output content for rtrv-ctrl-feat lists the controlled features provisioned in the EAGLE system.

Table 4-5 Output content for rtrv-ctrl-feat

Field Name Description Data
FEATNAME Feature name ASCII Text
PARTNUM Part number for the feature Integer
STATUS Status, can be one of the following: OFF, PERM-ON, TEMP-ON, EXPIRED ASCII Text
QUANTITY Quantity enabled for a quantity feature ASCII Text
TRIALTM Trial period of time remaining as calculated by the difference between the report time and the time stored in ctrlfeat.tbl ASCII Text

Example output file name: ctrl-feat_20031002_1338.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 38.0.0-60.3.0”,”1362156”,”2003-10-02”,”13:38:15”,”2007-11-07”,​”15:28:58”,”Eastern Standard Time”,”CONTROLLED FEATURE”,”26”,”2000”,”1%”<cr><lf>

“FEATNAME”,”PARTNUM”,”STATUS”,”QUANTITY”,”TRIALTM”<cr><lf>
“TPS”,893000110,”PERM-ON”,”1000”,””<cr><lf>
“ISUP NORMALIZATION”,893000110,”OFF”,,””<cr><lf>
“LNP SHORT MESSAGE SERVICE”,893006601,”TEMP-ON”,,”20 DAYS 20 HRS 43 MINS”<cr><lf>

J7 Point code Support Example: ctrl-feat_20020304_2041.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25",​"15:47:08",​"India Standard Time","CONTROLLED FEATURE","9","2000","1%"

"J7 support",893040801,"perm-on","",""

Maximum File Size

System header + Report header + Report data
250 + 50 + 2000 x 117 controlled features = 234,300 bytes

Note:

The maximum file size depends upon the number of controlled features supported in a particular release. Thus, whenever the number of controlled features increases/decreases in a specific release, this calculation must be updated.

Destination Point Code (rtrv-dstn)

The output content for rtrv-dstn lists all destination point code entries in the destination point code table.

Table 4-6 Output Content for rtrv-dstn

Field Name Description Data
DPC Destination Point Code ASCII Text
NTWK_DPC Network type of DPC ASCII Text
ALIAS PC1 Alias Point Code 1 ASCII Text
NTWK_ALIAS1 Network type of Alias Point Code 1 ASCII Text
ALIAS PC2 Alias Point Code 2 ASCII Text
NTWK_ALIAS2 Network type of Alias Point Code ASCII Text
CLLI The Common Language Location Identifier for the STP ASCII Text
BEI Broadcast Exception Indicator ASCII Text
ELEI Exception List Exclusion Indicator ASCII Text
DOMAIN The network in which the destination entity or node exists ASCII Text
SPC/PPC Secondary Point Code/ Proxy Point Code ASCII Text
NCAI Nested Cluster Allow Indicator ASCII Text
PRX Proxy Point Code Indicator ASCII Text
CNT The count of proxy linksets using this Proxy Point Code Integer
RCAUSE Release cause Integer
NPRST NM bits reset ASCII Text
SPLITIAM Maximum number of CdPN digits allowed in the IAM message before splitting occurs Integer
HMSMSC Home SMSC ASCII Text
HMSCP Home SCP ASCII Text
SCCPMSGCNV SCCP UDT(S)/XUDT(S) Message Conversion Indicator. This parameter specifies the kind of conversion performed on messages for this destination. ASCII Text

Example output file name: dstn_20031002_1338.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,””,”129”,”2009-08-27”,”15:13:01”,”2009-08-27”,”15:13:30”,”India Standard Time”,”DESTINATION POINT CODE”,”19”,”2000”,”1%”<cr><lf>

“DPC”,”NTWK_DPC”,”ALIAS PC1”,”NTWK_ALIAS1”,”ALIAS PC2”,”NTWK_ALIAS2”,”CLLI”,”BEI”,”ELEI”,”DOMAIN”,”SPC/PPC”,”NCAI”,”PRX”,”CNT”,”RCAUSE”,​”NPRST”,”SPLITIAM”,”HMSMSC”,”HMSCP”,”SCCPMSGCNV”<cr><lf>
“   001-001-001”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   002-002-002”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   007-007-007”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”xudt2udt”<cr><lf>
“   003-003-003”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   004-004-004”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”sxudt2udt”<cr><lf>
“   002-001-003”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   002-001-005”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”udt2xudt”<cr><lf>
“   003-003-002”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”yes”,0,”none”,”off”,”none”,​”no”,”no”,”udt2xudt”<cr><lf>
“   008-004-004”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   001-001-003”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   001-001-004”,”ANSI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   5-005-5”,”ITUI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”udt2xudt”<cr><lf>
“   6-006-6”,”ITUI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”xudt2udt”<cr><lf>
“   2-001-4”,”ITUI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   2-001-6”,”ITUI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   2-001-7”,”ITUI”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”udt2xudt”<cr><lf>
“   3-003-2”,”ITUI”,”   003-003-004”,”ANSI”,”--------------“,”-----“,​”-----------“,”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”xudt2udt”<cr><lf>
“   015-020-001”,”ITUN24”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”none”<cr><lf>
“   015-100-010”,”ITUN24”,”--------------“,”-----“,”--------------“,”-----“,​”-----------“,​”no”,​”---“,”SS7”,”   -----------   “,”----“,”no”,,”none”,”off”,”none”,​”no”,”no”,”sxudt2udt”<cr><lf>

J7 Point Code Support Example: dstn_20020304_2041.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25",​"15:04:13","India ​Standard Time","DESTINATION POINT CODE","11","2000","1%"

"DPC","NTWK_DPC","ALIAS PC1","NTWK_ALIAS1","ALIAS PC2","NTWK_ALIAS2","CLLI","BEI","ELEI","DOMAIN","SPC/PPC","NCAI","PRX","CNT","RCAUSE",​"NPRST","SPLITIAM","HMSMSC","HMSCP","SCCPMSGCNV"

"   2-002-2","ITUI","   001-04-06","ITUN16","   12321","ITUN","-----------","no","---",​"SS7","   -----------   ","----",,,"none","off","none","no","no"," none      "
"   007-14-00","ITUN16","--------------","-----","--------------",​"-----","-----------",​"no","---","SS7","   -----------   ","----",,,"none","off","none","no","no"," none      "

Maximum File Size

For a report of 2000 destination point codes:

System header + Report header + Report data
250 + 184 + 198 x 2000 = 396,434 bytes

For a report of 5000 destination point codes:

System header + Report header + Report data
250 + 184 + 198 x 5000 = 990,434 bytes

For a report of 6000 destination point codes:

System header + Report header + Report data
250 + 184 + 198 x 6000 = 1,188,434 bytes

For a report of 8000 destination point codes:

System header + Report header + Report data
250 + 184 + 198 x 8000 = 1,584,434 bytes

For a report of 10000 destination point codes:

System header + Report header + Report data
250 + 184 + 198 x 10,000 = 1,980,434 bytes

Signaling Link (rtrv-slk)

The output content for rtrv-slk lists all link information for LSL and ATM signaling links.

Table 4-7 Output content for rtrv-slk

Field Name Description Data
LOC The location of the card containing the signaling link Integer
LINK The port on the card containing the signaling link ASCII Text
LSN Link set name ASCII Text
SLC The signaling link code Integer
TYPE The type of the card ASCII Text
IPLIML2 IPLIMx level 2 stack ASCII Text
ANAME Association name ASCII Text
SLKTPS TPS of a signaling link in an IPSG link set. Integer
L2TSET Level 2 timer set Integer
LPSET ATM link parameter set identifier Integer
BPS The transmission rate of the signaling link in bits per second Integer
ECM The basic of PC for transmission ASCII Text
PCRN1 The MSU number ASCII Text
PCRN2 The octet number ASCII Text
ATMTSEL ATM timing selector ASCII Text
VCI ATM virtual channel identifier Integer
VPI ATM virtual path identifier Integer
LL ATM line length Integer
E1ATMCRC4 CRC4 multi frame structure enabling status ASCII Text
E1ATMSI Spare international NFAS Integer
E1ATMSN Spare national NFAS Integer
E1/T1LOC E1 or T1 card location (differentiated by TYPE) ASCII Text
E1/T1/J1PORT E1,T1 or J1 port number (differentiated by TYPE) Integer
TS Time slot Integer

Example output file: slk_20031107_1418.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 41.1.0-62.45.0”,”147”,”2006-14-08”,”19:05:23”,”2009-09-04”,​”15:39:10”,”CST”,”SIGNALING LINK”,”8”,”1200”,”1%”<cr><lf>

“LOC”,”LINK”,”LSN”,”SLC”,”TYPE”,”IPLIML2”,”ANAME”,”SLKTPS”,”L2TSET”,”LPSET”,”BPS”,”ECM”,​”PCRN1”,”PCRN2”,”ATMTSEL”,”VCI”,”VPI”,”LL”,”E1ATMCRC4”,”E1ATMSI”,”E1ATMSN”,​”E1/T1LOC”,”E1/T1/J1PORT”,”TS”<cr><lf>
1202,”A  “,”ls1”,0,”LIMDS0”,,,,1,,”56000 “,”BASIC”,”----“,”------“,,,,,,,,,,<cr><lf>
1202,”B  “,”ls2”,0,”LIMDS0”,,,,1,,”56000 “,”BASIC”,”----“,”------“,,,,,,,,,,<cr><lf>
1204,”A  “,”ls1204”,0,”LIMDS0”,,,,1,,”56000 “,”PCR”,”76  “,”3800  “,,,,,,,,,,<cr><lf>
1204,”A1 “,”ls1204”,1,”LIMDS0”,,,,1,,”56000 “,”PCR”,”89  “,”1000  “,,,,,,,,,,<cr><lf>
1203,”A”,”ls1203”,0,”LIMATM”,,,,,1,”1544000”,,,,”LINE”,5,0,0,,,,,, <cr><lf>
1206,”A1 “,”ls11”,0,”IPSG”,””,”assoc1207”,200,,,,,,,,,,,,,,,, <cr><lf>
1207,”A1 “,”ls22”,1,”IPSG”,””,”assoc1204”,200,,,,,,,,,,,,,,,, <cr><lf>
1106,”A  “,”ls163”,4,”SS7IPGW”,””,””,,,,,,,,,,,,,,,,,<cr><lf> 
1101,"A  ","ls123",1,"LIMT1",,,,36,,"64000 ","BASIC","----","------",,,,,,,,"",1,1<cr><lf>

Maximum File Size

There are four possible maximum file sizes depending on feature and DB provisioning.

  • The default maximum file size (system has up to 1200 links):
    System header + Report header + Report data
    250 + 193 + 193 x 1200 = 232,043 bytes
    
  • Maximum file size when quantity feature enabled to 1500 links:
    System header + Report header + Report data
    250 + 193 + 193 x 1500 = 289,943 bytes
    
  • Maximum file size when quantity feature enabled to 2000 links:
    System header + Report header + Report data
    250 + 193 + 193 x 2000 = 386,443 bytes
    
  • Maximum file size when quantity feature enabled to 2800 links:
    System header + Report header + Report data
    250 + 193 + 193 x 2800 = 540,843 bytes
    

Link Set (rtrv-ls)

The output content for rtrv-ls lists the attributes of all link sets.

Table 4-8 Output Content for rtrv-ls

Field Name Description Data
LSN Link set name ASCII Text
DOMAIN Network Domain ASCII Text
APC Adjacent Point Code ASCII Text
ITUNCHINA Indicate whether the linkset attaches to a 24 bit ITU China system ASCII Text
SCRN GWS Screen Set Name ASCII Text
L3TSET Level 3 Timer Set Integer
SLTSET SLTM Record Index Integer
BEI TFP Broadcast Exception Indicator ASCII Text
LST Link Set Type ASCII Text
LNKS Number of links assigned to this linkset Integer
GWSA Gateway Screening Action ASCII Text
GWSM Gateway Screening Mode ASCII Text
GWSD Gateway Screening MSU Discard Mode ASCII Text
SLSCI 5-to-8 Bit SLS Conversion Indicator ASCII Text
NIS Network Indicator Spare ASCII Text
SPC/PPC Secondary Point Code/ Proxy Point Code ASCII Text
CLLI Far end Common Language Location Identifier ASCII Text
TFATCABMLQ Minimum number of links in the given linkset that must be available to user-part messages traffic in order for the STP to consider the first-choice ordered routes using that linkset as allowed rather than restricted Integer
MTPRSE Shows whether the adjacent mode is equipped with MTP restart ASCII Text
ASL8 Shows whether the adjacent node is sending MSUs with 8-bit SLSs. ASCII Text
GSMSCRN GSM Map Screening Allowed ASCII Text
CHGMTP3OPC MTP3 OPC to SPC conversion allowed ASCII Text
SLSOCBIT Other CIC bit Integer
SLSRSB Rotated SLS Bit Integer
RANDSLS Per-Linkset Random SLS value ASCII Text
MULTGC Multiple Group Code allowed ASCII Text
ITUTFR Shows whether the ITU TFR procedure indicator is turned on or off ASCII Text
ICNIMAP The NI Mapping value for the incoming MSUs associated with the LinkSet. ASCII Text
OGNIMAP The NI Mapping value for the outgoing MSUs associated with the LinkSet. ASCII Text
CGPNBLSET Shows calling party blacklist set Integer
ISLSRSB Incoming SLS Bits Rotation Integer
RSLS8 Shows whether 5 or 8 bits SLS value should be considered for Incoming SLS Bit Rotation. ASCII Text
IPSG IP signaling gateway adjacent point code ASCII Text
ADAPTER Shows whether the linkset is an IPSG M2PA or IPSG M3UA linkset. ASCII Text
SLKTPS TPS of a signaling link in an IPSG linkset. Integer
LSUSEALM IPTPS LS alarm threshold percentage Integer
SLKUSEALM IPTPS SLK alarm threshold percentage Integer
RCONTEXT The routing context ID of an IPSG M3UA linkset. Integer
ASNOTIF Shows whether AS notifications will be generated for IPSG M3UA linkset. ASCII Text
GTTMODE GLOBAL TITLE TRANSLATION MODE HIERARCHY ASCII Text
CGGTMOD Calling Party GT Modification Indicator ASCII Text
PCT Point Code and CIC Translation ASCII Text
GNAMESET Generic Name set ASCII Text
VISUALIZEDATA Linkset based Visualization option. ASCII Text
NUMSLKALW Number of Signaling Links required to allow a linkset Integer
NUMSLKRSTR Number of Signaling Links required to restrict a linkset Integer
NUMSLKPROH Number of Signaling Links required to prohibit a linkset Integer

Example output file name: ls_20160415_1000.csv

Note:

For the LOC, LINK, SLC, TYPE, L2TSET, BPS, L1MODE, TSET, ECM, PCRN1, and PCRN2 parameters, see the rtrv-slk output (Signaling Link (rtrv-slk))

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,”MAXENTRIES”,”PCNTFULL”
“tekelecstp”,”EAGLE 42.0.0-63.32.0”,”40”,”2010-09-07”,”16:04:19”,”2010-09-08”,”16:17:46”,”India Standard Time”,”LINK SET”,”3”,”1024”,”1%”

“LSN”,”DOMAIN”,”APC”,”ITUNCHINA”,”SCRN”,”L3TSET”,”SLTSET”,”BEI”,”LST”,”LNKS”,”GWSA”,”GWSM”,”GWSD”,”SLSCI”,”NIS”,”SPC/PPC”,”CLLI”,”TFATCABMLQ”,”MTPRSE”,”ASL8”,”GSMSCRN”,”SLSOCBIT”,”SLSRSB”,”RANDSLS”,”MULTGC”,”ITUTFR”,”ICNIMAP”,”OGNIMAP”,”ISLSRSB”,”RSLS8”,”IPSG”,”IPGWAPC”,”ADAPTER”,”IPTPS”,”SLKTPS”,”LSUSEALM”,”SLKUSEALM”,”RCONTEXT”,”ASNOTIF”,”GTTMODE”,”CGGTMOD”,”PCT”,”NUMSLKALW”,”NUMSLKRSTR”,”NUMSLKPROH”
“ls111”,”ANSI”,”   001-001-001”,””,”none”,1,1,”no  “,”A”,1,”off “,”off “,”off “,”no”,”off”,”----------------“,”-----------“,1,”no”,”no”,”off”,,,”off”,,,,,,,”no”,”no”,,,,,,,,,”CdPA”,”no”,”on”,,,
“ls222”,”ITU-I”,”   2-002-2”,””,”none”,1,2,”no  “,”A”,0,”off “,”off “,”off “,”no”,”off”,”----------------“,”-----------“,1,”no”,”---“,”off”,,1,”off”,,”off”,,,,,”no”,”no”,,,,,,,,,”CdPA”,”no”,”off”,,,
“ls333”,”ITU-N”,”   00333”,””,”none”,1,2,”no  “,”A”,0,”off “,”off “,”off “,”no”,”off”,”----------------“,”-----------“,1,”no”,”---“,”off”,,1,”off”,,”off”,,,,,”no”,”no”,,,,,,,,,”CdPA”,”no”,”off”,,, 

J7 Point code Support Example : ls_20020304_2041.csv

CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25","15:04:13","India Standard Time","LINK SET","6","1024","1%"

"LSN","DOMAIN","APC","ITUNCHINA","SCRN","L3TSET","SLTSET","BEI","LST","LNKS","GWSA","GWSM","GWSD","SLSCI","NIS","SPC/PPC","CLLI","TFATCABMLQ","MTPRSE","ASL8","GSMSCRN","SLSOCBIT","SLSRSB","RANDSLS","MULTGC","ITUTFR","ICNIMAP","OGNIMAP","ISLSRSB","RSLS8","IPSG","IPGWAPC","ADAPTER","IPTPS","SLKTPS","LSUSEALM","SLKUSEALM","RCONTEXT","ASNOTIF","GTTMODE","CGGTMOD","PCT","NUMSLKALW","NUMSLKRSTR","NUMSLKPROH"
"ls1101b","ITU-N16","   007-14-00","","none",1,RFT,"no  ","A",1,"off ","off ","off ","no","off","----------------","-----------","---","---","---",,,1,"off",,"off","none","none",,,"yes","no",,"m3ua",,1000,100,80,"none","yes","CdPA","no","off",1,1,1

Example : ls_20191218_2022.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"e1111201","EAGLE 47.0.0.0.0-78.8.0","798187","2019-12-18","20:22:18","2021-03-18","02:11:11","Eastern Standard Time","LINK SET","4","1024","71%"

"LSN","DOMAIN","APC","ITUNCHINA","SCRN","L3TSET","SLTSET","BEI","LST","LNKS","GWSA","GWSM","GWSD","SLSCI","NIS","SPC/PPC","CLLI","TFATCABMLQ","MTPRSE","ASL8","GSMSCRN","CHGMTP3OPC","SLSOCBIT","SLSRSB","RANDSLS","MULTGC","ITUTFR","ICNIMAP","OGNIMAP","CGPNBLSET","ISLSRSB","RSLS8","IPSG","ADAPTER","SLKTPS","LSUSEALM","SLKUSEALM","RCONTEXT","ASNOTIF","GTTMODE","CGGTMOD","PCT","GNAMESET","VISUALIZEDATA","NUMSLKALW","NUMSLKRSTR","NUMSLKPROH"
"ls5217a1","ANSI","006-010-006","","none",1,1,"no  ","A",16,"off ","off ","off ","no","off","----------------","-----------",8,"no","no","off","on",,,"all",,,,,"none",,,"yes","m2pa",200,100,80,"none","no","CdPA","no","off","Both","off",,,
"ls5217a2","ANSI","006-011-006","","none",1,1,"no  ","A",16,"off ","off ","off ","no","off","----------------","-----------","---","no","no","off","on",,,"all",,,,,"none",,,"yes","m3ua",93,100,80,"none","yes","CdPA","no","off","Both","off",1,1,1
"ls4316a1","ANSI","006-021-006","","none",1,1,"no  ","A",16,"off ","off ","off ","no","off","----------------","-----------",8,"no","no","off","on",,,"off",,,,,"none",,,"yes","m2pa",500,100,80,"none","no","CdPA","no","off","Both","off",,,
"ls4316a2","ANSI","006-022-006","","none",1,1,"no  ","A",16,"off ","off ","off ","no","off","----------------","-----------","---","no","no","off","on",,,"off",,,,,"none",,,"yes","m3ua",93,100,80,"none","yes","CdPA","no","off","Both","off",1,1,1

Maximum File Size

For a report of 1024 link sets:

   System header 	+ Report header 	+ Report data
	250		+	 424		+	 397 X 1024	=	407202 bytes

Route (rtrv-rte)

The output content for rtrv-rte contains the parameter information for all routes.

Table 4-9 Output Content for rtrv-rte

Field Name Description Data
DPC Destination Point Code ASCII Text
NTWK_DPC Network type of DPC ASCII Text
ALIAS PC1 Alias Point Code 1 ASCII Text
NTWK_ALIAS1 Network type of ALIAS PC1 ASCII Text
ALIAS PC2 Alias Point Code 2 ASCII Text
NTWK_ALIAS2 Network type of ALIAS PC2 ASCII Text
RTX Yes or No indication of associated exception route set ASCII Text
CLLI Common Language Identifier assigned to this link ASCII Text
LSN1 Link Set Name (each DPC may have maximum of 6 routes) ASCII Text
RC1 Relative Cost Integer
APC1 Adjacent Point Code ASCII Text
LSN2 Link Set Name ASCII Text
RC2 Relative Cost Integer
APC2 Adjacent Point Code ASCII Text
LSN3 Link Set Name ASCII Text
RC3 Relative Cost Integer
APC3 Adjacent Point Code ASCII Text
LSN4 Link Set Name ASCII Text
RC4 Relative Cost Integer
APC4 Adjacent Point Code ASCII Text
LSN5 Link Set Name ASCII Text
RC5 Relative Cost Integer
APC5 Adjacent Point Code ASCII Text
LSN6 Link Set Name ASCII Text
RC6 Relative Cost Integer
APC6 Adjacent Point Code ASCII Text

Example Output File: rte_20031002_1338.csv

Abbreviated example output file format:

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“stdcfg2b”,” EAGLE 40.1.0-62.1.0”,”172”,”2008-11-05”,”17:17:02”,”2008-11-05”,​”17:54:45”,​”Eastern Standard Time”,”ROUTE”,”85”,”2000”,”4%”<cr><lf>


“DPC”,”NTWK_DPC”,”ALIAS PC1”,”NTWK_ALIAS1”,”ALIAS PC2”,”NTWK_ALIAS2”,”RTX”,”CLLI”,”LSN1”,”RC1”,”APC1”,”LSN2”,”RC2”,”APC2”,”LSN3”,”RC3”,​”APC3”,”LSN4”,”RC4”,”APC4”,”LSN5”,”RC5”,”APC5”,”LSN6”,”RC6”,”APC6”
“   001-001-000”,”ANSI”,”--------------“,”-----“,​”--------------“,”-----“,”No”,”stp1”,​”e2e1”,10,”   001-001-000”,,,,,,,,,,,,,,,
“   001-001-007”,”ANSI”,”   1-001-7”,”ITUI”,”   02063”,”ITUN”,,”dstn07”,,,,,,,,,,,,,,,,,,
“   001-002-000”,”ANSI”,”   1-002-0”,”ITUI”,” s-02064”,”ITUN”,,”dstn08”,,,,,,,,,,,,,,,,,,
“   2-010-7”,”ITUI”,”   002-010-007”,”ANSI”,”   002-010-007”,”ITUN24”,,”dstn20”,,,,,,,,,,,,,,,,,,
“   3-030-1”,”ITUI”,” s-3-030-1”,”ITUI”,”   06385”,”ITUN”,,”dstn30”,,,,,,,,,,,,,,,,,,
“ s-3-040-7”,”ITUI”,” s-06471”,”ITUN”,”   06471”,”ITUN”,,”dstn39”,,,,,,,,,,,,,,,,,,
“   08193”,”ITUN”,”   004-000-001”,”ANSI”,”--------------“,”-----“,,”dstn42”,,,,,,,,,,,,,,,,,,
“ s-08278”,”ITUN”,” s-4-010-6”,”ITUI”,”   4-010-6”,”ITUI”,,”dstn55”,,,,,,,,,,,,,,,,,,
“   006-005-005”,”ITUN24”,”   006-005-005”,”ANSI”,”   6-005-5”,”ITUI”,,”dstn67”,,,,,,,,,,,,,,,,,,<cr><lf>

J7 Point Code Support Example: rte_20020304_2041.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25",​"15:04:13","India Standard Time","ROUTE","11","2000","1%"

"DPC","NTWK_DPC","ALIAS PC1","NTWK_ALIAS1","ALIAS PC2","NTWK_ALIAS2","RTX","CLLI","LSN1","RC1","APC1","LSN2","RC2","APC2","LSN3","RC3",​"APC3","LSN4","RC4","APC4","LSN5","RC5","APC5","LSN6","RC6","APC6"
"   2-002-2","ITUI","   001-04-06","ITUN16","   12321","ITUN","No","-----------","ls3",10,"   2-002-2",,,,,,,,,,,,,,"   002-14-00","ITUN16","   5-006-2","ITUI","   12322","ITUN","No","-----------","ls1",10,"   002-14-00",,,,,,,,,,,,,,,

Maximum File Size

For a report of 2000 routes (DSTN5000 feature not enabled):
System header + Report header + Report data
250 + 201 + 239 x 2000 = 478,451 bytes
For a report of 5000 routes (6000 Routeset feature not enabled):
System header + Report header + Report data
250 + 201 + 239 x 5000 = 1,195,451 bytes
For a report of 6000 routes (6000 Routeset feature enabled):
System header + Report header + Report data
250 + 201 + 239 x 6000 = 1,434,451 bytes
For a report of 8000 routes (8000 Routeset feature enabled):
System header + Report header + Report data
250 + 201 + 239 x 8000 = 1,912,451 bytes

STP Options (rtrv-stpopts)

The output content for rtrv-stpopts lists all the current values of the STP node-level processing option indicators maintained in the STP options table

Table 4-10 Output Content for rtrv-stpopts

Field Name Description Data
OPTION Option name ASCII Text
VALUE Current Value for the option ASCII Text or Integer

Example output file: stpopts_20100907_1528.csv

Abbreviated example output file format:

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tklc1141003","EAGLE 47.0.0.0.0-78.10.0","112","2021-04-13","05:00:14","2021-05-24","07:12:00","Eastern Standard Time","STP OPTION","31","49","63%"

"OPTION","VALUE"
"MTPT31CTL",1
"MTPLTI","yes"
"MTPLTCTDPCQ",3
"MTPLTST",10000
"MTPDPCQ",2000
"TFATFRPR",1000
"MTPLPRST","yes"
"MTPT10ALT",30000
"UIMRD","no"
"SLSCNV","off"
"CRITALMINH","no"
"DISPACTALMS","no"
"NPCFMTI",14-00-00-00
"DEFCC","none"
"DEFNDC","none"
"DSMAUD","off"
"RPTLNPMRSS","yes"
"RANDSLS","off"
"RSTRDEV","off"
"ARCHBLDID","off"
"MFC","on"
"PCT","off"
"PCN16FMT","745"
"UITHROTTLE",0
"GBSUSNMINM","off"
"GDPCA","--------------"
"EPAP240M","off"
"EPAPX","off"
"UIMPERIOD",0
"VISUALIZATION","off"
"LNPTN756M","off"

Maximum File Size

System header + Report header + Report data
250 + 16 + 35 x 46 options = 1876 bytes

ATINP Options (rtrv-atinpqopts)

The output content for rtrv-atinpqopts contains the current values of the ATINPQOPTS table used for number conditioning.

Table 4-11 Output Content for rtrv-atinpqopts

Field Name Description Data
OPTION Option name ASCII Text
VALUE Current Value for the option ASCII Text or Integer

Example output file: atinpqopts_20090812_1220.csv

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”
“tekelecstp”,”EAGLE  45.0.0-64.40.0”,”3”,”2012-08-24”,”12:20:25”,”2012-08-24”,​”12:33:46”,​”Eastern Standard Time”,”ATINPQOPTS”,”12”,”12”,”100%”

“OPTION”,”VALUE”
“ATIACKIMSI”,”NONE”
“ATIACKMSISDN”,”MSISDN”
“ATIACKRN”,”RN”
“ATIDFLTRN”,”NONE”
“ATIDLM”,”NONE”
“ATINPTYPE”,”ANY”
“ENTITYLEN”,”NONE”
“SNAI”,”NAI”
“SPORTTYPE”,”NONE”
"ATISUPPLOCINFO","OFF"
"VLRNUMLEN",40
"ATIACKVLRNUM","RNSPMSISDN"

Maximum File Size

System header + Report header + Report data
250 + 17 + 252 = 519 bytes

IPAS (rtrv-as)

The output content for rtrv-as lists all attributes of the IPAS table.

Table 4-12 Output Content for rtrv-as

Field Name Description Data
AS Name Name of the Application Server ASCII Text
Mode Traffic Mode ASCII Text
Tr ms The recovery timer Integer
Association Names Name of the association ASCII Text

Example output file: ipas_20081218_1205.csv

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 40.1.0-62.2.0”,”277”,”2008-12-17”,”13:27:16”,”2008-12-17”,​”14:59:44”,​”India Standard Time”,”IPAS”,”11”,”250”,”4%”<cr><lf>

“AS Name”,”Mode”,”Tr ms”,”Association Names”<cr><lf>
“a567”,”LOADSHARE”,10,”c125”<cr><lf>
  , , ,”b234”<cr><lf>
  , , ,”c123”<cr><lf>
  , , ,”c124”<cr><lf>
  , , ,”c125”<cr><lf>
“a568”,”LOADSHARE”,10,”assoc110”<cr><lf>
“a569”,”LOADSHARE”,10,”b234”<cr><lf>
“a560”,”LOADSHARE”,10,”c123”<cr><lf>
  , , ,”c129”<cr><lf>
  , , ,”c130”<cr><lf>
  , , ,”c131”<cr><lf>
“a561”,”LOADSHARE”,10,”c124”<cr><lf>
“a562”,”LOADSHARE”,10,”c125”<cr><lf>
“a563”,”LOADSHARE”,10,”c126”<cr><lf>
“a564”,”LOADSHARE”,10,”c127”<cr><lf>
“a565”,”LOADSHARE”,10,”c128”<cr><lf>
“a566”,”LOADSHARE”,10,”c129”<cr><lf>
“as1”,”LOADSHARE”,10,”assoc110”<cr><lf>
  , , ,”c126”<cr><lf>
  , , ,”c127”<cr><lf>
  , , ,”c128”<cr><lf>
  , , ,”c132”<cr><lf>
  , , ,”c133”<cr><lf>
  , , ,”c134”<cr><lf>
  , , ,”c135”<cr><lf>
  , , ,”c136”<cr><lf>

Maximum File Size

System header + Report header + Report data
250 + 46 + 250 x 38 = 9796 bytes

IP Node (rtrv-ip-node)

The output content for rtrv-ip-node is shown in Table 4-13.

Table 4-13 Output Content for rtrv-ip-node

Field Name Description Data
IPADDR The remote host's IP address ASCII Text
IPPORT The logical IP port that addresses the application on the node Integer
IPAPPL The IP application supported by the node ASCII Text
LOC Card location Integer
CAP Connection's maximum thernet capacity percentage ASCII Text
IPRTE The default router's IP address ASCII Text

Example output file: ipnode_20081218_1205.csv

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL”<cr><lf>
“tekelecstp”,”EAGLE 40.1.0-62.2.0”,”277”,”2008-12-17”,”13:27:16”,”2008-12-17”,​”14:59:44”,​”India Standard Time”,”IPNODE”,”7”,”2848”,”1%”<cr><lf>

Maximum File Size

System header + Report header + Report data
250 + 48 + 2848 x 53 = 151242 bytes

SSCPOPTS (rtrv-sccpopts)

The output content for rtrv-sccpopts is shown in Table 4-14.

Table 4-14 Output Content for rtrv-sccpopts

Field Name Description Data
OPTION Options name ASCII Text
VALUE Options value ASCII Text or Integer

Example output file: sccpopts_20140829_1505.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"
"tekelecstp"," EAGLE 46.2.0-65.29.0","1","2014-08-29","15:05:40","2014-09-01",​"17:25:05",​"India Standard Time","SCCP OPTION","21","21","100%"

"OPTION","VALUE"
"CLASS1SEQ","off"
"CCLEN","0"
"ACLEN","0"
"INTLUNKNNAI","no"
"SUBDFRN","off"
"DFLTGTTMODE","CdPA"
"CNVAINAT","1"
"MOBRSCCPOPC","MTP"
"TGTT0","NONE"
"TGTT1","NONE"
"TGTTUDTKEY","MTP"
"TGTTXUDTKEY","MTP"
"GMSTCAPCE","off"
"DFLTFALLBACK","no"
"MTPRGTT","off"
"MTPRGTTFALLBK","mtproute"
"UNQGTTSEL","bestmatch"
"DELCCPREFIX","pfxwcc"
"GTTDIST","all"
"ITUN16SCMG","off"
"CNVCLGITU","off"

Maximum File Size

System header + Report header + Report data
250 + 17 + 22 x 21 = 729 bytes

SSAPPL (rtrv-ss-appl)

The output content for rtrv-ss-appl lists all attributes of the SSAPPL table.

Table 4-15 Output Content for rtrv-ss-appl

Field Name Description Data
APPL Application type ASCII Text
SSN Subsystem number ASCII Text
STAT Status: online or offline ASCII Text
RQDTBLNOP RequiredTBLNotPresent ASCII Text

Example output file: ssappl_20081218_1205.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES",​"MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 40.1.0-62.2.0","482","2008-12-24","11:48:23","2008-12-29",​"10:29:49",​"India Standard Time","SSAPPL","2","6","33%"<cr><lf>

“APPL”,”SSN”,”STAT”,”RQDTBLNOP” <cr><lf>
“EIR”,11,”online”,”DISC” <cr><lf>
“ATINPQ”,10,”online”,”UDTS” <cr><lf>

Maximum File Size

System header + Report header + Report data
250 + 33 + 6 x 41 = 529 bytes

Measurement Options (rtrv-measopts)

The output content for rtrv-measopts lists all attributes of the MEASOPTS table.

Table 4-16 Output Content for rtrv-measopts

Field Name Description Data
OPTION Option name ASCII Text
VALUE Option value ASCII Text

Example output file: measopts_2018119_1205.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tekelecstp","","1","2000-00-00","00:00:00","2018-01-19","00:49:16","Eastern Standard Time","MEASOPTS","30","65","46%"

"OPTION","VALUE"
"PLATFORMENABLE","on"
"COLLECT15MIN","on"
"CLLIBASEDNAME","off"
"OAMHCMEAS","on"
"UNCHLINKLABEL","off"
"SYSTOTSTP","on"
"SYSTOTTT","off"
"SYSTOTIDPR","off"
"SYSTOTSIP","off"
"SYSTOTSFTHROT","off"
"SYSTOTSFAPP","on"
"COMPLINK","off"
"COMPLNKSET","off"
"COMPSCTPASOC","on"
"COMPSCTPCARD","on"
"COMPUA","off"
"GTWYSTP","off"
"GTWYLNKSET","off"
"GTWYORIGNI","on"
"GTWYORIGNINC","off"
"GTWYLSORIGNI","off"
"GTWYLSDESTNI","off"
"GTWYLSONISMT","off"
"NMSTP","off"
"NMLINK","off"
"NMLNKSET","off"
"AVLLINK","off"
"AVLDLINK","off"

Maximum File Size

System header 	+ Report header 	+ Report data
250		+	18		+	26x23	=	866 bytes

AIQ Options (rtrv-aiqopts)

The output content for rtrv-aiqopts lists all attributes of the AIQ options table.

Table 4-17 Output Content for rtrv-aiqopts

Field Name Description Data
OPTION Option name ASCII Text
VALUE Current value for the option ASCII Text or Integer
TRIGTYPE Trigger type Integer
PFX Routing prefix for the trigger type Integer

Example output file: aiqopts_20090812_1220.csv

“CLLI”,”SWREL”,”DBLEVEL”,”DBDATE”,”DBTIME”,”RPTDATE”,”RPTIME”,”TZ”,”RPTDATA”,”NUMENTRIES”,​”MAXENTRIES”,”PCNTFULL” <cr><lf>
“tekelecstp”,”EAGLE 41.0.0-62.34.51”,”36”,”2009-08-12”,”12:20:25”,”2009-08-12”,​”12:33:46”,​”India Standard Time”,”AIQOPTS”,”8”,”26”,”31%” <cr><lf>

“OPTION”,”VALUE”<cr><lf>
“DIGMINLEN”,1<cr><lf> 
“DIGMAXLEN”,32<cr><lf> 
“RESFMT”,”PFXDN”<cr><lf>  
“RESPAR”,”RTDIGITS”<cr><lf>  
“TCAPERR”,138<cr><lf> 
“TRIGTYPE”,”PFX”<cr><lf>
1,12<cr><lf> 
32,222<cr><lf>
255,4234<cr><lf>

Maximum File Size

System header + Report header + Report data
250 + 18 + 245 = 513 bytes

Note:

A maximum of 20 TRIGTYPE - PFX mappings can be provisioned in the AIQOPTS table.

MTC Measurement Options (rtrv-mtc-measopts)

The output content for rtrv_mtc_measopts lists all hourly and daily attributes of the MEASOPTS table.

Table 4-18 Output Content for rtrv-mtc-measopts

Field Name Description Data
OPTION Option name ASCII Text
VALUE Option value ASCII Text

Example output file: mtc-measopts_20170719_1230.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tekelecstp","","1","2000-00-00","00:00:00","2018-01-19","00:49:26","Eastern Standard Time","MTC MEASOPTS","32","65","49%"

"OPTION","VALUE"
"MTCHLNP","off"
"MTCHNP","off"
"MTCHMAP","off"
"MTCHEIR","off"
"MTCHATINPQ","off"
"MTCHVFLEX","off"
"MTCHAIQ","off"
"MTCHGTTAPATH","on"
"MTCHDEIR","off"
"MTCHENUM","off"
"MTCHGTTSET","on"
"MTCDSTP","off"
"MTCDLINK","off"
"MTCDLNKSET","off"
"MTCDLNP","off"
"MTCDNP","off"
"MTCDMAP","off"
"MTCDEIR","off"
"MTCDATINPQ","off"
"MTCDVFLEX","off"
"MTCDSCTPASOC","on"
"MTCDSCTPCARD","on"
"MTCDUA","off"
"MTCDAIQ","off"
"MTCDGTTAPATH","off"
"MTCDSIP","off"
"MTCDDEIR","off"
"MTCDENUM","off"
"MTCDSFTHROT","off"
"MTCDGTTSET","on"
"MTCDSFAPP","on"

Maximum File Size

System header 	+ Report header 	+ Report data
250		+	18		+	23x31	=	981 bytes

GEN_NAME

The report lists all the attributes of GEN_NAME table. Output content refers to rtrv-gen-name.

Table 4-19 Output Content for rtrv-gen-name

Field name Description Data
GENERIC NAME Name ASCII TEXT
SETTYPE Set to which name belong ASCII TEXT

Example output file: generic_name_20190930_0349.csv

"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tekelecstp","EAGLE 46.9.0.0.0-76.5.0","9","2019-09-30","03:49:36","2019-09-30","03:50:23","Eastern Standard Time","GERNERIC NAME","5","5000","1%"

"GENERIC NAME","SETTYPE"
"hospital","Both "
"police australi","SetB "
"1234*","Both "
"*work","SetA "
"512345678901234","SetA "

Maximum File Size

   System header 	+ Report header 	+ Report data
250		+	26		+     5000x27	 =	135276 bytes