5 Measurements
This chapter describes the measurements information available from the EAGLE Stateful Applications feature.
Stateful Applications Measurements
Refer to Measurements Reference for information about measurement systems and reporting.
Refer to Commands User's Guide for descriptions of commands used to generate, schedule, and transfer measurements reports.
Refer to Database Administration - System Management User's Guide for provisioning information and procedures for these measurement systems:
- Measurements Platform
- E5-OAM Integrated Measurements
Supported report types include SYSTOT-SFAPP and MTCDSDAPP. For Stateful Applications, the EAGLE allows the capturing of the following measurement reports:
- Successful validations
- Failed validations
The EAGLE will keep the message and its information for at maximum 5 seconds. The message will be dropped and a measurement pegged in case a response is not received within the 5 second time frame.
There are 32 SFAPP GTT actions. Each SFAPP GTT action will have the following four (4) measurement pegs:
- PASSED - Number of messages that were successfully routed after the validation passed.
- FAILED - Number of messages for which validation was performed and the validation did not pass.
- ERROR1 - All errors due to which validation could not be performed on the messages that the EAGLE did not generate (ActivateSS, UpdateLocation, for example).
- ERROR2 - All errors due to which validation could not be performed on the messages that the EAGLE generated or their response (ATI, ATI_ACK, for example).