4 Feature Configuration

This chapter provides the procedure for configuring the EAGLE Stateful Applications feature.

Introduction

This chapter contains example commands for configuring the Stateful Applications feature of the Oracle Communications EAGLE.

Refer to Commands User's Guide for complete command descriptions including parameter names, valid parameter values, examples, and dependencies.

Stateful Applications Configuration

Example commands for configuring the SFAPP feature are as follows:
  1. Configure the SFAPP card.
    ent-card:loc=xxx:type=slic:appl=sfapp
  2. Configure the SFAPP local subsystem.
    ent-ss-appl:appl=SFAPP:ssn=12:stat=online
  3. Configure SFAPP GTT actions.

    ent-gttact:actid=disc:act=disc

    ent-gttact:actid=uc3:act=sfapp:on=uimreqd:failactid=disc:defactid=fallback:scfaddr=1111111111

    ent-gttact:actid=sfaptparm:act=sfapp:hlraddr=tcapparm:scfaddr=1911111111:defactid=disc:failactid=disc:tt=29

    chg-gttact:actid=uc3:ATIRESCGMODID=sfappati:PSIRESCGMODID=sfapppsi (step 5 needs to be executed first before this command)

  4. Configure GTMOD for CgPA portion for ATI and PSI messages (to be assigned to ATIRESCGMODID and PSIRESCGMODID of the SFAPP GTTACTION)

    ent-gtmod:GTMODID=sfapppsi:NTT=23:NGTI=4:NNP=1:NNAI=4:PRECD=pfx:CGPASSN=10:NPDS=22222222223

    ent-gtmod:GTMODID=sfappati:NTT=23:NGTI=4:NNP=1:NNAI=4:PRECD=pfx:CGPASSN=10:NPDS=22222222221

  5. Configure GTT for translating the incoming UL message to the SFAPP GTT action.

    GTT action set table: ent-gttaset:actsn=sfappuc3:actid1=uc3

    GTT SET table: ent-gttset:gttsn=sfapp:netdom=itu:settype=cdgta

    GTT SEL table: ent-gttsel:gtii=4:cdgttsn=sfapp:tt=20:np=e164:nai=intl and ent-gttsel:gtii=4:cdgttsn=sfapp:tt=23:np=e164:nai=intl

  6. Configure GTT for translating the ATI/PSI message to the SFAPP GTT Action or SFAPP subsystem (based on the HANDLRESP parameter configured under SFAPP GTT action).

    HLR: ent-gta:gttsn=sfapp:gta=2222222210:egta=2222222260:xlat=dpc:ri=gt:pci=3-003-3:ACTSN=sfappuc3:mrnset=none

    VLR: ent-gta:gttsn=sfapp:gta=95604:egta=95604:xlat=dpc:ri=gt:pci=2-002-2:mrnset=none

  7. Configure Mate-stp table with TPC and mate STP PCs.

    ent-mate-stp:pci=4-185-3 (Eagle 11 TPC)

    ent-mate-stp:pci=xxxx (for mate)

  8. Configure SFLOG card for connecting EEDB.

    ent-card:loc=1103:type=ipsm:appl=ips:sflog

    chg-ip-lnk:loc=1103:port=a:ipaddr=10.75.52.61:SUBMASK=255.255.255.0:MACTYPE=DIX:auto=yes:mcast=no

    chg-ip-card:loc=1103:SRCHORDR=SRVR:DEFROUTER=10.75.52.1

  9. Configure IP connection (ENT-IP-CONN) for connecting EEDB.

    ent-ip-host:host=eedb:ipaddr=10.75.50.106:type=remote

    ent-ip-host:host=sflog:ipaddr=10.75.52.61:type=local

    ent-ip-conn:cname=conn1:prot=tcp:lhost=sflog:lport=2100:rport=17529:rhost=eedb

    chg-ip-conn:cname=conn1:open=yes

  10. Configure VLR profile entries (ENT-VLR-PROF) are configured with filter graylist.

    ent-vlr-prof:vlr=95604:filter=graylist:ageofloc=no:IMEIRTRV=yes

    ent-vlr-prof:vlr=ab123:filter=graylist:ageofloc=no:IMEIRTRV=yes

  11. Configure VLR roaming table (ENT-VLR-ROAMING).

    ent-vlr-roaming:oldvlr=ab123:newvlr=95604:time=10 (This entry goes in the static table)

  12. Turn on the global UC3 option.

    SFAPPOPTS:VLRIMEICHALLENGE=YES

    chg-sfappopts:VLRIMEICHALLENGE=yes

  13. Use AGEOFLOC and IMEIRTRV parameter under VLR profile entry (RTRV-VLR-PROF) selectively turn OFF or ON UC2 and UC3 for the VLR.

    chg-vlr-prof:vlr=95604:ageofloc=no:IMEIRTRV=yes

  14. Use DEFACTID and FAILACTID and under the SFAPP GTT action to selectively configure the Default and Failure actions for the SFAPP GTT action.

    chg-gttact:actid=uc3:on=HANDLRESP