Measurements

5 Measurements

This chapter describes the measurements information available from the EAGLE for the IS41 GSM Migration (IGM) feature.

IGM Measurements

Refer to Measurements Reference for information about measurement systems and reporting.

Refer to Commands User's Guide for descriptions of commands used to generate, schedule, and transfer measurements reports.

Refer to Database Administration - System Management User's Guide for provisioning information and procedures for these measurement systems:

OAM-based Measurements - IGM measurements are available using the File Transfer Area (FTA) feature and not directly by EAGLE terminals.
Measurements Platform
E5-OAM Integrated Measurements

Table 5-1 describes the peg counts of Message Signalling Units (MSUs) supported per-system for the A-Port featureIGM feature.

Table 5-1 Pegs for Per System IGM Measurements

Event Name	Description	Type	Unit
APSMSRCV	Number of SMS Request messages received If the MT-Based IS41 SMS NP feature is not turned on and the `is41opts:smsreqbypass` option is set to yes, this count will not be updated. If neither the MT-Based IS41 SMS NP feature nor the IGM feature is turned on, this count will not be updated.	System	Peg count
APSMSREL	Number of SMS Request messages relayed If the MT-Based IS41 SMS NP feature is not turned on and the is41opts:smsreqbypass option is set to yes, this count will not be updated. If neither the MT-Based IS41 SMS NP feature nor the IGM feature is turned on, this count will not be updated	System	Peg count
APSMRQREP	Number of SMSREQ messages received that result in SMSREQ ACK or SMSREQ NACK responses This count will include any SMSREQ NACKs generated by the IGM feature.	System	Peg count
APSMRQERR	Number of SMSREQ messages received that resulted in error This count is applicable only when the incoming message is SMSREQ . The peg count is incremented only when the MT-Based IS-41 SMS NP feature is turned on. If the IGM feature is also turned on and the IGM feature handles the message resulting in an error, this peg count is incremented.	System	Peg count
GPSRRCV	Number of call-related SRI messages received	System	Peg count
GPSRGTT	Number of call-related SRI messages that fell through to GTT	System	Peg count
GPSRREP	Number of call-related SRI messages that received A-Port service	System	Peg count
GPSRERR	Number of call-related messages that cause errors and SRI Negative ACK	System	Peg count
IS41LRERR	Number of IS-41 Location Request - Error response messages sent	System	Peg count
IS41LRMRCV	Number of IS-41 Location Request messages received.	System	Peg count
IS41LRRTRN	Number of IS-41 Location Request - Return Result messages sent	System	Peg count

Table 5-2 describes the peg counts of Message Signalling Units (MSUs) supported per-SSP for the IGM feature.

Table 5-2 Pegs for Per SSP IGM Measurements

Event Name	Description	Type	Unit
APLRACK	Number of call related LOCREQ messages acknowledged	Point Code	Peg count
APLRRLY	Number of call related LOCREQ messages relayed	Point Code	Peg count
APNOCL	Number of non-call non-LOCREQ related messages relayed	Point Code	Peg count
APNOCLGT	Number of non-call non-LOCREQ related messages that fell through to GTT	Point Code	Peg count
GPSRACK	Number of call-related SRI responses	Point Code	Peg count
GPSRRLY	Number of call-related SRI messages relayed	Point Code	Peg count

Table 5-3 describes the peg counts of Message Signalling Units (MSUs) supported both per-system and per-SSP for the IGM feature.

Table 5-3 Pegs for Per System and Per SSP IGM Measurements

Event Name	Description	Type	Unit
GPNOCL	Number of non-call-related messages relayed by G-Port	System, Point Code	Peg count
GPNOCLGT	Number of non-call-related messages that fell through to GTT	System, Point Code	Peg count