This chapter describes the EAGLE commands used to administer the MO SMS related feature. The command descriptions include parameters that are used with the MO SMS related feature. Refer to Commands User's Guide for complete command descriptions including parameter names, valid parameter values, examples, and dependencies.

The GSM system options (chg/rtrv-gsmopts) commands change and display GSM system options in the EAGLE database.

• chg-gsmopts: Change GSM System Options Command – The chg-gsmopts command changes GSM system options in the GSMOPTS table. The default or currently provisioned parameter value is overwritten when a parameter is specified.

  Table 3-1 chg-gsmopts Parameters

  Parameter	Range	Description
  crptt	0-255, none	Circular Route Prevention Translation Type The MNP Circular Route Prevention feature must be turned on before this parameter can be provisioned to any value other than none. The MNP Circular Route Prevention feature cannot be turned off if this parameter is provisioned to any value other than none. The default value is none.
  defmapvr	1-3	Default MAP version
  defmcc	1-3 digits, none	E212 default mobile country code
  defmnc	1-4 digits, none	E212 default mobile network code
  gsm2is41	1-15 digits, none	GSM to IS-41 migration prefix
  is412gsm	1-15 digits, none	IS-41 to GSM migration prefix
  mccmnc	4-7 digits, none	E212 mobile country code and mobile network code
  migrpfx	single, multiple	Migration prefix
  msisdntrunc	1 digit (0-5)	MS ISDN Truncation digits
  msrndig	rn, rndn, ccrndn, rnccdn, rnasd, asdrn, rnasddn, asdrndn, ccrnasddn, ccasdrndn, rnasdccdn, asdrnccdn, rngrn, grnrn, rngrndn, grnrndn, ccrngrndn, ccgrnrndn, rngrnccdn, grnrnccdn	RN used "as is" or with MSISDN
  msrnnai	1-7	NAIV for the MSRN
  msrnnp	0-15	Numbering plan for the MSRN
  multcc	1 to 3 digits (0-9, a-f, A-F)	Multiple Country Code
  nmultcc	1 to 3 digits (0-9, a-f, A-F), none	New Multiple Country Code
  off	encdnpsdnnotfound, encdnpsptnone, encodecug, encodenps, srismgttrtg	This parameter turns off specified options. Up to 8 comma-separated unique options can be specified. encdnpsdnnotfound - NPSI for DN not found option This option specifies whether the NPSI is included in SRI Ack messages when the DN is not found. The default setting is off. encdnpsptnone - NPSI for PT = none This option specifies whether the NPSI is included in SRI Ack messages when the Portability Type = none. The default setting is off. encodecug - Closed User Group (CUG) option This option specifies whether the Closed User Group (CUG) Checkinfo from the SRI message is included in the SRI ack message. The default setting is off. encodenps - Number Portability Status Indicator (NPSI) option This option specifies whether the Number Portability Status Indicator (NPSI) is omitted from all SRI Ack messages. The default setting is on. srismgttrtg - SRI_SM Routing option This option specifies whether the SRI_SM routing feature is on. The default setting is off.
  on	encdnpsdnnotfound, encdnpsptnone, encodecug, encodenps, srismgttrtg	This parameter turns on specified options. Up to 8 comma-separated unique options can be specified. Refer to off parameter for option descriptions.
  serverpfx	1-4 digits, none	Server SRI prefix
  srfaddr	1-15 digits	Entity address of MNP_SRF node
  srfnai	0-127	NAIV of the MNP_SRF
  srfnp	0-15	Numbering plan value of the MNP_SRF Network Code
  sridn	tcap, sccp	Send Routing Information Dialed Number location
  sridnnotfound	gtt, srinack	When G-Port encounters an RTDB query result that indicates that the given DN is not known, SRIDNNOTFOUND parameter value determines further processing.

• rtrv-gsmopts: Retrieve GSM System Options Command – The rtrv-gsmopts command displays the GSM option values that are provisioned in the GSMOPTS table.

The GSM SMS options (chg/rtrv-gsmsmsopts) commands change and display specific SMS and MMS options in the EAGLE database. The chg-gsmsmsopts command parameters associated with IS41 GSM Migration feature are shown in Table 3-2.

• chg-gsmsmsopts: Change GSM SMS Options Command – The chg-gsmsmsopts command changes GSM SMS and MMS system options in the database. This command updates the GSMSMSOPTS table. The default parameters are always overwritten when specified.

  Table 3-2 chg-gsmsmsopts Parameters

  Parameter	Range	Description
  defis41smsc	1-15 digits, none	Default IS41 short message service center
  igmsmsrelay	yes, no	IGM-based SMS relay
  is41smscgttsn	ayyyyyyyy	IS41 SMSC GTT Set name

• rtrv-gsmsmsopts: Retrieve GSM SMS Options Command - The rtrv-gsmsmsopts command displays all GSM SMS and MMS options from the database.

The IS41 options (chg/rtrv-is41opts) commands are used to change and display the values of one or more of the system-level processing option values maintained in the IS41OPTS table. All values are assigned initially to system defaults at STP installation. The values can be updated using the chg-is41opts command.

• chg-is41opts: Change IS41 Options – The chg-is41opts command changes IS41-specific options in the database. This command updates the IS41OPTS table. The default or currently provisioned parameter values are overwritten when a parameter is specified.

  Table 3-3 chg-is41opts Parameters - Class = DATABASE

  Parameter	Range	Description
  dfltrn	1-15 hexadecimal digits (0-9, a-f, A-F), none	Default Routing Number. This parameter specifies the routing digits when Service Portability is not applicable. This parameter can be modified only when the LOCREQ Query Response feature is enabled. Default value is none.
  esnmfg	0-255	TCAP LOCREQ ESN Manufacturer code. This parameter specifies the value to be encoded in the TCAP LOCREQ ESN parameter in the manufacturer code section.
  esnsn	0-16777215	TCAP LOCREQ ESN Serial Number. This parameter specifies the value to be encoded in the TCAP LOCREQ ESN parameter in the serial number section.
  iec	digit string 1-5 digits, none	International Escape Code
  locreqdn	tcap, sccp	LOCREQ DN. This parameter specifies whether to obtain the Called Party, used for database lookup, from the SCCP layer or the TCAP layer of a received LOCREQ message.
  locreqrmhrn	yes, no	LOCREQ Remove HomeRN. This parameter specifies whether to remove the HomeRN from the TCAP Outgoing Called party for a relayed LOCREQ message. This parameter cannot be specified in the same command entry as the on and off parameters.
  mscmktid	0-65535	LOCREQ MSCID Market ID. This parameter specifies the value to be encoded in LOCREQ MSCID parameter for Market ID.
  mscswitch	0-255	LOCREQ MSCID Market ID Switch. This parameter specifies the value to be encoded in LOCREQ MSCID parameter in the market id switch section.
  mtplocreqnai	ccrndn, frmsg, intl, natl, rnidn, rnndn, rnsdn, sub, locreqlen	Message Translation Part LOCREQ nature of address indicator. Used to define how Called Party obtained from the TCAP layer of a received MTP-routed LOCREQ message is interpreted.
  nec	digit string 1-5 digits, none	National Escape Code
  off	locreqrmhrn, locreqrspnd, smsreqbypass	This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified. locreqrmhrn - LOCREQ Remove HomeRN. This option specifies whether to remove the HomeRN from the TCAP Outgoing Called party for a relayed LOCREQ message. Option default is off. locreqrspnd - LOCREQ Query Response. This option specifies whether to always respond to a LOCREQ query. This option can be changed only if the LOCREQ Query Response feature is turned on. Option default is off. smsreqbypass - SMSREQ Bypass. This option specifies whether a received SMSREQ message that passes the MNP Service Selector (serv=mnp parameter of chg-sccp-serv) will undergo A-Port message processing. Option default is off. This parameter cannot be specified in the same command entry as the locreqrmhrn and smsreqbypass parameters.
  on	locreqrmhrn, locreqrspnd, smsreqbypass	This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified. See off parameter for option descriptions. This parameter cannot be specified in the same command entry as the locreqrmhrn and smsreqbypass parameters.
  rspcdpari	frmsg, gt, ssn	Response Called Party Routing Indicator. This parameter specifies the value of the Routing Indicator bit to encode the SCCP CdPA GTA of a returned LOCREQ message.
  rspcgpanai	0-127, none	Response Calling Party Nature of Address Indicator (NAI). This parameter specifies a new NAI value to override the NAI value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspcgpanp	0-15, none	Response Calling Party Numbering Plan. This parameter specifies a new Numbering Plan value to override the Numbering Plan value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspcgpapcp	frmsg, on, off	Response Calling Party Point Code Present. This parameter specifies the value of the Point Code Present bit to encode the SCCP CgPA GTA of a returned LOCREQ message
  rspcgpari	frmsg, gt, ssn	Response Calling Party Routing Indicator. This parameter specifies the value of the Routing Indicator bit to encode the SCCP CgPA GTA of a returned locreq message.
  rspcgpatt	0-255, none	Response Calling Party Translation Type (TT). This parameter specifies a new TT value to override the TT value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspdig	ccrndn, hrnrndn, rn, rndn	Routing Number. This parameter specifies the digit encoding format of the TCAP Outgoing Called Party parameter for a LOCREQ response message on a per EAGLE node basis.
  rspdigtype	0-255	Response Digit Type. This parameter specifies the value that will encode the DigitType field in the TCAP Outgoing Called Party parameter of a LOCREQ response message.
  rspmin	homern, nothomern, tendelhomern, tenhomern, tenzero	Response LOCREQ MIN Parameter Encoding. This parameter specifies how the digits of the LOCREQ MIN parameter will be encoded.
  rspnon	0-255, none	MSRN Nature of Number. This parameter specifies the Nature of Number value of the TCAP Outgoing Called Party parameter.
  rspnp	0-15, none	MSRN Numbering Plan. This parameter specifies the Numbering Plan values of the TCAP Outgoing Called Party parameter.
  rspparm	ddigit, rtdigit, tlist	Response Parameter. This parameter specifies which TCAP LOCREQ parameter (TCAP Outgoing Called Party) will encode the RN and/or DN information.
  smsreqbypass	yes, no	SMSREQ Bypass. This parameter specifies whether a received SMSREQ message that passes the MNP Service Selector (serv=mnp parameter of chg-sccp-serv) will undergo IS41 GSM Migration (IGM) message processing. This parameter cannot be specified in the same command entry as the on and off parameters. The MT-Based IS41 SMS NP feature does not consider the value of this parameter. If smsreqbypass has a value of yes, the IGM processing will not be applied but the message will be considered for MT-Based IS41 SMS NP processing.
  sporttype	none, gsm, is41, all	Service Portability Type. This parameter specifies the application of Service Portability that is applied to the associated feature. This parameter can be modified only when the Service Portability and LOCREQ Query Response features are enabled. Default value is none.
  tcapsnai	ccrndn, frmsg, intl, natl, rnidn, rnndn, rnsdn, sub	This parameter specifies how the Called Party from the TCAP layer of a received LOCREQ message is interpreted.

• rtrv-is41opts: Retrieve IS41 Options – The rtrv-is41opts command displays the IS41 option values that are provisioned in the IS41OPTS table.

The service selector (ent/chg/dlt/rtrv-srvsel) commands are used to provision, delete, change, and display the applicable service selectors required to change a service entry for SCCP services.

• ent-srvsel: Enter Service Selectors – The parameters of the ent-srvsel command can be used to specify the applicable service selectors that indicate that IGM feature processing is required. The IGM feature must be enabled before entering this command.

  Table 3-4 ent-srvsel Parameters

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  serv	Mandatory	eir, gflex, gport, inpq, inpmr, smsmr, idps, idpr, mnp, vflex, atinp	SCCP service
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Mandatory	0-255	Translation Type
  nai	Optional	1sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	10-15	Numbering Plan Value
  snai	Optional	1sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn	Service Nature of Address Indicator
  snp	Optional	1e164, e212, e214	Service Numbering Plan

• chg-srvsel: Change Service Selector – The chg-srvsel command can be used to specify the applicable selectors required to change an existing IGM selector entry.

  Table 3-5 chg-srvsel Parameters

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Mandatory	0-255	Translation Type
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value
  nserv	Mandatory	eir, gflex, gport, inpq, inpmr, smsmr, idpr, idps, mnp, vflex, atinp	New SCCP service
  nsnai	Optional	sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn, none	New Service Nature of Address Indicator
  nsnp	Optional	e164, e212, e214, none	New Service Numbering Plan

• dlt-srvsel: Delete Service Selector – The dlt-srvsel command deletes a service selector entry..

  Table 3-6 dlt-srvsel Parameters

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Mandatory	0-255	Translation Type
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value

• rtrv-srvsel: Retrieve Service Selector – The rtrv-srvsel command displays a list of administered service selector combinations. Output is sorted first by service, then by global title domain (ANSI first, followed by ITU), GTI, translation type, numbering plan, and by the nature of address indicator. The output can be filtered by specifying any optional parameter.

  Table 3-7 rtrv-srvsel Parameters

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Optional	2, 4	Global Title Indicator
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value
  serv	Optional	eir, gflex, gport, inpq, inpmr, smsmr, idpr, idps, mnp, vflex, atinp	SCCP service
  snai	Optional	sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn	Service Nature of Address Indicator
  snp	Optional	e164, e212, e214	Service Numbering Plan
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Optional	0-255	Translation Type

The ent/chg/rtrv-ctrl-feat commands are used to enable, turn on, and display the feature status of the IS41 GSM Migration (IGM) feature. A Feature Access Key is used to enable the IGM feature. The feature must be purchased to receive a Feature Access Key for the feature.

No temporary key is associated with the IGM feature. After the feature is turned on, it cannot be turned off.

Additional verifications are performed to ensure the correct hardware is present in the system. T

The feature part number 893017301 is used to enable the IGM feature on the EAGLE.

• enable-ctrl-feat: Enable Control Feature Command

  The enable-ctrl-feat command is used for the permanent enabling of the IGM feature.

  enable-ctrl-feat:partnum=893017301:fak=<Feature Access Key>

• chg-ctrl-feat: Change Control Feature Command

  The chg-ctrl-feat command is used to turn on the IGM feature. The IGM feature must be enabled before it can be turned on.

  chg-ctrl-feat:partnum=893017301:status=on

• rtrv-ctrl-feat: Retrieve Control Feature Command

  The rtrv-ctrl-feat command is used display the status of the feature.

The chg/dlt/rtrv-sccp-serv commands allow for services to be taken online and offline, and for the service processing loads to be shifted to other designated nodes. These commands also support the assignment of PCs to PC groups used for MNP re-route assignment.

The chg-sccp-serv command is used to provision entries in the SCCP-SERV table. The provisioned entries are shown in the rtrv-sccp-serv command output. The maximum number of entries that the MRN table can contain is reduces by the number of entries shown in the rtrv-sccp-serv command output. For more information on provisioning MRN tables, refer to Database Administration - GTT User's Guide.

• chg-sccp-serv: Change SCCP Service – The chg-sccp-serv command is used to add point codes to an existing service group, or to change the Relative Cost (RC) of existing point codes in a group. SCCP Service groups are organized by service (G-Flex, G-Port, MNP) and point code network type (ANSI, ITU-I, ITU-I Spare, ITU-N, ITU-N Spare, or ITU-N24). Up to seven PCs may be in a network type grouping for service re-route load sharing. This command allows for additions and modifications of up to four PCs at once. The point code parameters support the Spare Point Code subtype prefix s- for ITU-I and ITU-N point codes.

  Table 3-8 chg-sccp-serv Parameters

  Parameter	Optional/ Mandatory	Range	Description
  serv	Mandatory	gport, gflex, mnp	Service
  state	Optional	offline, online	Status
  gtt	Optional	no, yes	Global Title Translation
  pc1, pca1, pci1, pcn1, pcn241	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  rc1	Optional	00-99	Relative Cost
  pc2, pca2, pci2, pcn2, pcn242	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  rc2	Optional	00-99	Relative Cost
  pc3, pca3, pci3, pcn3, pcn243	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  rc3	Optional	00-99	Relative Cost
  pc4, pca4, pci4, pcn4, pcn244	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  rc4	Optional	00-99	Relative Cost

• dlt-sccp-serv: Delete SCCP Service – The dlt-sccp-serv command is used remove entries from the SCCP-SERV table. A single command may remove either a PC from a group, or remove the entire group.

  Table 3-9 dlt-sccp-serv Parameters

  Parameter	Optional/ Mandatory	Range	Description
  serv	Mandatory	gport, gflex, mnp	Service
  pc1, pca1, pci1, pcn1, pcn241	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  pc2, pca2, pci2, pcn2, pcn242	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  pc3, pca3, pci3, pcn3, pcn243	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  pc4, pca4, pci4, pcn4, pcn244	Optional	Refer to Commands ser's Guide	Post GTT-translated PC
  all	Optional	No, Yes	Yes will delete the entire group

• rtrv-sccp-serv: Retrieve SCCP Service – The rtrv-sccp-serv command is used to display the SCCP Service application relationship information maintained by the EAGLE. Point codes are grouped by service.