Table of Contents
- Title and Copyright Information
- My Oracle Support (MOS)
- Acronyms
- What's New in This Guide
- 1 Introduction
-
2
IP7 Secure Gateway Overview
- 2.1 Introduction
- 2.2 Hardware, Applications, and Functions
- 2.3 IP Connections
- 2.4 Point-to-Point Connectivity (IPLIM or IPLIMI Application)
- 2.5 Point-to-Multipoint Connectivity (SS7IPGW and IPGWI)
- 2.6 SNMP Agent Implementation
- 2.7 Mixed Networks Using the ANSI/ITUMTP Gateway Feature
- 2.8 IETF Adapter Layer Support
- 2.9 IP Signaling Gateway (IPSG)
-
3
IETF M2PA Configuration Procedures
- 3.1 Adding IETF IPLIMx Components
- 3.2 Adding an IPLIMx Card
- 3.3 Adding an IPLIMx Signaling Link
- 3.4 Configuring an IP Link
- 3.5 Adding an IP Host
- 3.6 Configuring an IP Card
- 3.7 Adding an IP Route
- 3.8 Adding an M2PA Association
- 3.9 Activating the Large MSU Support for IP Signaling Feature
- 3.10 Removing IETF M2PA Components
- 3.11 Removing an IPLIMx Card
- 3.12 Removing an IPLIMx Signaling Link
- 3.13 Removing an IP Host Assigned to an IPLIMx Card
- 3.14 Removing an IP Route
- 3.15 Removing an M2PA Association
- 3.16 Changing IETF M2PA Components
- 3.17 Changing the Attributes of an M2PA Association
- 3.18 Changing the Buffer Size of a M2PA Association
- 3.19 Changing the Host Values of a M2PA Association
- 3.20 Changing the Link Value of a M2PA Association to another Link Value on the Same IPLIMx Card
- 3.21 Configuring SCTP Retransmission Control for a M2PA Association
- 3.22 Changing a M2PA Timer Set
- 3.23 Changing the SCTP Checksum Algorithm Option for M2PA Associations
- 3.24 Turning Off the Large MSU Support for IP Signaling Feature
-
4
IETF M3UA and SUA Configuration Procedures
- 4.1 Adding IETF M3UA and SUA Components
- 4.2 Adding an IPGWx Card
- 4.3 Configuring an IPGWx Linkset
- 4.4 Adding a Mate IPGWx Linkset to another IPGWx Linkset
- 4.5 Adding an IPGWx Signaling Link
- 4.6 Configuring an IP Link
- 4.7 Adding an IP Host
- 4.8 Configuring an IP Card
- 4.9 Adding an IP Route
- 4.10 Adding an M3UA or SUA Association
- 4.11 Adding a New Association to a New Application Server
- 4.12 Adding an Existing Association to a New Application Server
- 4.13 Adding a New Association to an Existing Application Server
- 4.14 Adding an Existing Association to an Existing Application Server
- 4.15 Adding a Routing Key Containing an Application Server
- 4.16 Adding a Network Appearance
- 4.17 Activating the Large MSU Support for IP Signaling Feature
- 4.18 Removing IETF M3UA and SUA Components
- 4.19 Removing an IPGWx Card
- 4.20 Removing an IPGWx Signaling Link
- 4.21 Removing a Mate IPGWx Linkset from another IPGWx Linkset
- 4.22 Removing an IP Host Assigned to an IPGWx Card
- 4.23 Removing an IP Route
- 4.24 Removing a M3UA or SUA Association
- 4.25 Removing an Association from an Application Server
- 4.26 Removing a Routing Key Containing an Application Server
- 4.27 Removing a Network Appearance
- 4.28 Changing IETF M3UA and SUA Components
- 4.29 Changing IP Options
- 4.30 Changing the Attributes of a M3UA or SUA Association
- 4.31 Changing the Buffer Size of a M3UA or SUA Association
- 4.32 Changing the Host Values of a M3UA or SUA Association
- 4.33 Configuring SCTP Retransmission Control for a M3UA or SUA Association
- 4.34 Changing an Application Server
- 4.35 Changing the CIC Values in an Existing Routing Key Containing an Application Server
- 4.36 Changing the Routing Context Value in an Existing Routing Key
- 4.37 Changing the SCTP Checksum Algorithm Option for M3UA and SUA Associations
- 4.38 Changing a UA Parameter Set
- 4.39 Turning Off the Large MSU Support for IP Signaling Feature
- 5 End Office Support
-
6
IPSG M2PA and M3UA Configuration Procedures
- 6.1 Adding IPSG Components
- 6.2 Adding an IPSG Card
- 6.3 Adding an IPSG M2PA Linkset
- 6.4 Adding an IPSG M3UA Linkset
- 6.5 Configuring an IP Link
- 6.6 Adding an IP Host
- 6.7 Configuring an IP Card
- 6.8 Adding an IP Route
- 6.9 Adding an IPSG M2PA Association
- 6.10 Adding an IPSG M3UA Association
- 6.11 Adding an IPSG M2PA Signaling Link
- 6.12 Adding an IPSG M3UA Signaling Link
- 6.13 Adding a Network Appearance
- 6.14 Activating the Large MSU Support for IP Signaling Feature
- 6.15 Removing IPSG Components
- 6.16 Removing an IPSG Card
- 6.17 Removing an IPSG Linkset
- 6.18 Removing an IP Host Assigned to an IPSG Card
- 6.19 Removing an IP Route
- 6.20 Removing an IPSG Association
- 6.21 Removing an IPSG M2PA Signaling Link
- 6.22 Removing an IPSG M3UA Signaling Link
- 6.23 Removing a Network Appearance
- 6.24 Changing IPSG Components
- 6.25 Changing an IPLIMx Card to an IPSG Card
- 6.26 Configuring IP Options
- 6.27 Configuring IPSG M3UA Linkset Options
- 6.28 Changing an IPSG M2PA Linkset
- 6.29 Changing an IPSG M3UA Linkset
- 6.30 Changing the Attributes of an IPSG Association
- 6.31 Changing the Buffer Size of an IPSG Association
- 6.32 Changing the Host Values of an IPSG Association
- 6.33 Configuring an IPSG Association for SCTP Retransmission Control
- 6.34 Changing the SCTP Checksum Algorithm Option for IPSG M2PA Associations
- 6.35 Changing the SCTP Checksum Algorithm Option for IPSG M3UA Associations
- 6.36 Changing an M2PA Timer Set
- 6.37 Changing a UA Parameter Set
- 6.38 Turning Off the Large MSU Support for IP Signaling Feature
- A Reference Information