5 Measurements
This chapter describes the measurements information available from the EAGLE for the A-Port feature.
A-Port Measurements
Refer to Measurements Reference for information about measurement systems and reporting.
Refer to Commands User's Guide for descriptions of commands used to generate, schedule, and transfer measurements reports.
Refer to Database Administration - System Management User's Guide for provisioning information and procedures for these measurement systems:
-
OAM-based Measurements - A-Port measurements are available using the File Transfer Area (FTA) feature and not directly by EAGLE terminals.
-
Measurements Platform
-
E5-OAM Integrated Measurements
Table 5-1 describes the peg counts of Message Signalling Units (MSUs) supported per-system for the A-Port feature.
Table 5-1 Pegs for Per System A-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
APSMSREL |
Number of SMS Request messages relayed |
System |
Peg count |
|
APSMRQREP |
Number of SMSREQ messages received that result in SMSREQ ACK or SMSREQ NACK responses This count includes any SMSREQ NACKs generated by the Migration feature. |
System |
Peg count |
|
APSMRQERR |
Number of SMSREQ messages received that resulted in error This count is applicable only when the incoming message is SMSREQ . The peg count is incremented only when the MT-Based IS-41 SMS NP feature is turned on. If the IGM feature is also turned on and the IGM feature handles the message resulting in an error, this peg count will be incremented. |
System |
Peg count |
|
IS41LRERR |
Number of IS-41 Location Request - Error response messages sent |
System |
Peg count |
|
IS41LRMRCV |
Number of IS-41 Location Request messages received |
System |
Peg count |
|
IS41LRRTRN |
Number of IS-41 Location Request - Return Result messages sent |
System |
Peg count |
Table 5-2 describes the peg counts of Message Signalling Units (MSUs) supported per-SSP for the A-Port feature.
Table 5-2 Pegs for Per SSP A-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
APLRACK |
Number of call related LOCREQ messages acknowledged |
Point Code |
Peg count |
|
APLRRLY |
Number of call related LOCREQ messages relayed |
Point Code |
Peg count |
|
APNOCL |
Number of non-call non-LOCREQ related messages relayed |
Point Code |
Peg count |
|
APNOCLGT |
Number of non-call non-LOCREQ related messages that fell through to GTT |
Point Code |
Peg count |
|
APSMRQREP |
Number of SMSREQ messages received from a specific SSP that resulted in SMSREQ ACK or SMSREQ NACK repsonses This count will include any SMSREQ NACKs generated by the IGM feature. |
Point Code |
Peg count |
|
APSMRQERR |
Number of SMSREQ messages received from a specific SSP that resulted in error This count is applicable only when the incoming message is SMSREQ. The peg count is incremented only when the MT-Based IS-41 SMS NP feature is turned on. If the IGM feature is also turned on and the IGM feature handles the message resulting in an error, this peg count will be incremented. |
Point Code |
Peg count |
|
GPSRACK |
Number of call-related SRI responses |
Point Code |
Peg count |
|
GPSRRLY |
Number of call-related SRI messages relayed |
Point Code |
Peg count |
Table 5-3 describes the peg counts of Message Signalling Units (MSUs) supported both per-system and per-SSP for the A-Port feature.
Table 5-3 Pegs for Per System and Per SSP A-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
APSMSRCV |
Number of SMS Request messages received |
System, Point Code |
Peg count |
|
MNPCRD |
Number of times Circular Route is detected |
System, Point Code |
Peg count |