This chapter describes the EAGLE commands used to administer the MO SMS related feature. The command descriptions include parameters that are used with the MO SMS related feature. Refer to Commands User's Guide for complete command descriptions including parameter names, valid parameter values, examples, and dependencies.

The A-Port system options (is41opts) commands are used to change and report on the values of one or more of the STP node level processing option indicators maintained in the IS41option tables. All values are assigned initially to system defaults at STP installation time. The values can be updated later using the chg-is41opts command.

• chg-is41opts: Change IS41 Options Command – The chg-is41opts command changes IS41-specific options in the database. This command updates the IS41OPTS table. The default parameter values are always overwritten when specified.

  Table 3-1 chg-is41opts Parameters - Class = DATABASE

  Parameter	Range	Description
  dfltrn	1-15 hexadecimal digits (0-9, a-f, A-F), none	Default Routing Number. This parameter specifies the routing digits when Service Portabilty is not applicable. This parameter can be modified only when the LOCREQ Query Response feature is enabled. Default value is none.
  esnmfg	0-255, none	TCAP LOCREQ ESN Manufacturer Code. This parameter specifies the value to be encoded in the TCAP LOCREQ ESN parameter in manufacturer code section.
  esnsn	0-16777215	TCAP LOCREQ ESN Serial Number. This parameter specifies the value to be encoded in the TCAP LOCREQ ESN parameter in serial number section.
  iec	digit string 1-5 digits, none	International Escape Code
  locreqdn	tcap, sccp	LOCREQ DN. This parameter specifies whether to obtain the Called Party, used for database lookup, from the SCCP layer or the TCAP layer of a received LOCREQ message.
  locreqrmhrn	yes, no	LOCREQ Remove HomeRN. This parameter specifies whether to remove the HomeRN from the TCAP Outgoing Called party for a relayed LOCREQ message. This parameter cannot be specified in the same command entry as the on and off parameters.
  mscmktid	0-65535	LOCREQ MSCID Market ID. This parameter specifies the value to be encoded in LOCREQ MSCID parameter for Market ID.
  mscswitch	0-255	LOCREQ MSCID Market ID Switch. This parameter specifies the value to be encoded in LOCREQ MSCID parameter in the market id switch section.
  mtplocreqlen	5-15	The parameter specifies the number of terminating called party digits to extract from the LOCREQ message.
  mtplocreqnai	ccrndn, frmsg, intl, natl, rnidn, rnndn, rnsdn, sub}, none	Message Translation Part LOCREQ Nature of Address Indicator. This parameter defines how Called Party obtained from the TCAP layer of a received MTP-routed LOCREQ message is interpreted.
  nec	digit string 1-5 digits, none	National Escape Code
  off	locreqrmhrn, locreqrspnd, smsreqbypass	This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified. locreqrmhrn - LOCREQ Remove HomeRN. This option specifies whether to remove the HomeRN from the TCAP Outgoing Called party for a relayed LOCREQ message. Option default is off. locreqrspnd - LOCREQ Query Response. This option specifies whether to always respond to a LOCREQ query. This option can be changed only if the LOCREQ Query Response feature is turned on. Option default is off. smsreqbypass - SMSREQ Bypass. This option specifies whether a received SMSREQ message that passes the MNP Service Selector (serv=mnp parameter of chg-sccp-serv) will undergo A-Port message processing. Option default is off. This parameter cannot be specified in the same command entry as the locreqrmhrn and smsreqbypass parameters.
  on	locreqrmhrn, locreqrspnd, smsreqbypass	This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified. See off parameter for option descriptions. This parameter cannot be specified in the same command entry as the locreqrmhrn and smsreqbypass parameters.
  rspcdpapcp	off, on, frmsg	Response Called Party Point Present. This parameter specifies the point code present bit that will encode the SCCP CdPA GTA of a LOCREQ response message.
  rspcdpari	frmsg, gt, ssn	Response Called Party Routing Indicator. This parameter specifies the value of the Routing Indicator bit to encode the SCCP CdPA GTA of a returned LOCREQ message.
  rspcgpanai	ccrndn, frmsg, intl, natl, rnidn, rnndn, rnsdn, sub}, none	Response Calling Party Nature of Address Indicator (NAI). This parameter specifies a new NAI value to override the NAI value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspcgpanp	0-15, none	Response Calling Party Numbering Plan. This parameter specifies a new Numbering Plan value to override the Numbering Plan value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspcgpapcp	frmsg, included, notincluded	Response Calling Party Point Code Present. This parameter specifies the value of the Point Code Present bit to encode the SCCP CgPA GTA of a returned LOCREQ message.
  rspcgpari	frmsg, gt, ssn	Response Calling Party Routing Indicator. This parameter specifies the value of the Routing Indicator bit to encode the SCCP CgPA GTA of a returned LOCREQ message.
  rspcgpatt	0-255, none	Response Calling Party Translation Type (TT). This parameter specifies a new TT value to override the TT value specified in the SCCP CdPA of a received LOCREQ/SMSREQ if the message is to be relayed after database lookup.
  rspdig	ccrndn, hrnrndn, rn, rndn	Routing Number. This parameter specifies the digit encoding format of the TCAP Outgoing Called Party parameter for a LOCREQ response message on a per EAGLE node basis.
  rspdigtype	0-255	Response Digit Type. This parameter specifies the value that will encode the DigitType field in the TCAP Outgoing Called Party parameter of a LOCREQ response message.
  rspmin	homern, nothomern, tendelhomern, tenhomern, tenzero	Response LOCREQ MIN Parameter Encoding. This parameter specifies how the digits of the LOCREQ MIN parameter will be encoded.
  rspnon	0-255, none	MSRN Nature of Number. This parameter specifies the Nature of Number value of the TCAP Outgoing Called Party parameter.
  rspnp	0-15, none	MSRN Numbering Plan. This parameter specifies the Numbering Plan values of the TCAP Outgoing Called Party parameter.
  rspparm	ddigit, rtdigit, tlist	Response Parameter. This parameter specifies which TCAP LOCREQ parameter (TCAP Outgoing Called Party) will encode the RN and/or DN information.
  smsreqbypass	yes, no	SMSREQ Bypass. This parameter specifies whether a received SMSREQ message that passes the MNP Service Selector (serv=mnp parameter of chg-sccp-serv) will undergo A-Port message processing. This parameter cannot be specified in the same command entry as the on and off parameters. The MT-Based IS41 SMS NP feature does not consider the value of this parameter. If smsreqbypass has a value of yes, the A-Port processing will not be applied but the message will be considered for MT-Based IS41 SMS NP processing.
  sporttype	none, gsm, is41, all	Service Portability Type. This parameter specifies the application of Service Portability that is applied to the associated feature. This parameter can be modified only when the Service Portability and LOCREQ Query Response features are enabled. Deafult value is none.
  tcapsnai	ccrndn, frmsg, intl, natl, rnidn, rnndn, rnsdn, sub}, none	This parameter specifies how the Called Party from the TCAP layer of a received LOCREQ message is interpreted.

• rtrv-is41opts: Retrieve IS41 Options Command The rtrv-is41opts command displays the IS41 option indicators maintained in the IS41OPTS table.

The IS41 SMS options (is41smsopts) commands change and display SMS options in the EAGLE database for the MT-based IS41 SMS NP feature. The following sections describe the two variations: chg-is41smsopts and rtrv-is41smsopts.

Command: chg-is41smsopts           Class = DATABASE

    tekelecstp 08-04-08 19:38:30 EST  EAGLE 39.0.0
   
    IS41 SMS OPTIONS
    -----------------------
    MTSMSDNFMT    = RNDN
    MTSMSTYPE     = RN
    MTSMSPARM     = DIGIT
    MTSMSDLTR     = NO
    MTSMSDLTRV    = NONE
    MTSMSACKN     = ACK
    MTSMSESN      = NO
    MTSMSSSN      = 6
    MTSMSNAKERR   = 5
    MTSMSDIGTYPE  = 6
    MTSMSSCHKSRC  = NO
;

The A-Port service selector (srvsel) commands are used to provision, remove, change, and report on the applicable service selectors required to change a service entry for Service Module card services. These commands provide flexibility when provisioning the type of messages that require A-Port processing. Four variants of the service selector commands are described in the following sections: ent-srvsel, chg-srvsel, dlt-srvsel, and rtrv-srvsel.

• ent-srvsel: Enter A-Port Service Selectors Command

  The ent-srvsel command specifies that the applicable A-Port service selectors indicating A-Port processing are required. The A-Port feature must be enabled before entering this command. The available parameters are:

  Table 3-3 ent-srvsel Parameters - Class = DATABASE

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  serv	Mandatory	mnp	Service Module card service
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Mandatory	0-255	Translation Type
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value
  snai	Optional	sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn	Service Nature of Address Indicator
  snp	Optional	e164, e212, e214	Service Numbering Plan

• chg-srvsel: Change A-Port Service Selector Command

  The chg-srvsel command specifies the applicable A-Port selectors required to change an existing A-Port selector entry. The available parameters are:

  Table 3-4 chg-srvsel Parameters - Class = DATABASE

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Mandatory	0-255	Translation Type
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value
  nserv	Mandatory	eir, gflex, gport, inpq, inpmr, smsmr, idps, idpr, mnp	New Service Module card service to be selected
  nsnai	Optional	sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn	New Service Nature of Address Indicator
  nsnp	Optional	e164, e212, e214	New Service Numbering Plan

• dlt-srvsel: Delete A-Port Service Selector Command

  The dlt-srvsel command deletes a A-Port service selector. The available parameters are:

  Table 3-5 dlt-srvsel Parameters - Class = DATABASE

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Mandatory	2, 4	Global Title Indicator
  tt	Mandatory	0-255	Translation Type
  ssn	Mandatory	0-255, *	Subsystem number
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value

• rtrv-srvsel: Retrieve A-Port Service Selector Command

  The rtrv-srvsel command displays a list of administered A-Port service selector combinations. All output is sorted first by service, then by global title domain (ANSI first, followed by ITU), GTI, translation type, numbering plan, and by the nature of address indicator. The output can be filtered by specifying any optional parameter. The available parameters are:

  Table 3-6 rtrv-srvsel Parameters - Class = DATABASE

  Parameter	Optional/ Mandatory	Range	Description
  gti, gtia, gtii, gtin, gtin24	Optional	2, 4	Global Title Indicator
  nai	Optional	sub, rsvd, natl, intl	Nature Of Address Indicator
  naiv	Optional	0-127	NAI Value
  np	Optional	e164, generic, x121, f69, e210, e212, e214, private	Numbering Plan
  npv	Optional	0-15	Numbering Plan Value
  serv	Optional	mnp	Service Module card service
  snai	Optional	sub, natl, intl, rnidn, rnndn, rnsdn, ccrndn	Service Nature of Address Indicator
  snp	Optional	e164, e212, e214	Service Numbering Plan
  ssn	Mandatory	0-255, *	Subsystem number
  tt	Optional	0-255	Translation Type

The ent/chg/rtrv-ctrl-feat commands are used to enable, turn on, and display the feature status of the A-Port feature. A Feature Access Key is used to enable the A-Port feature. The feature must be purchased to receive a Feature Access Key for the feature. No temporary key is associated with the A-Port feature. After the feature is on, it cannot be turned off.

Additional verifications are performed to ensure that the correct hardware is present in the system.

• enable-ctrl-feat: Enable Control Feature Command

  The enable-ctrl-feat command is used for the permanent enabling of the A-Port feature.

  enable-ctrl-feat:partnum=893016601:fak=<Feature Access Key>

• chg-ctrl-feat: Change Control Feature Command

  The chg-ctrl-feat command is used to turn on the A-Port feature. The A-Port feature must be enabled before it can be turned on.

  chg-ctrl-feat:partnum=893016601:status=on

• rtrv-ctrl-feat: Retrieve Control Feature Command

  The rtrv-ctrl-feat command is used display the status of the feature.

The MNP SCCP Service commands (chg/dlt/rtrv-sccp-serv) allow services to be taken online and offline and allow their processing load to be shifted to other designated nodes. These commands also support the assignment of PCs to PC groups used for MNP re-route assignment.

Entries are provisioned in the SCCP-SERV table using the chg-sccp-serv command, and are shown by the rtrv-sccp-serv command output. The maximum number of entries that the MRN table can contain is reduced by the number of entries shown in the rtrv-sccp-serv command output. For more information on provisioning MRN tables, refer to Database Administration - GTT User's Guide.

The chg-sccp-serv command is used to add point codes to an existing service group or to change the Relative Cost (RC) of existing point codes in a group. SCCP Service groups are organized by service (G-Flex, G-Port, MNP) and point code network type (ANSI, ITU-I, ITU-I Spare, ITU-N, ITU-N, ITU-N Spare, or ITU-N24). Up to seven PCs can be in a network type grouping for service re-route load sharing. The command allows for additions/modifications of up to four PCs at one time. The point code parameters support the Spare Point Code subtype prefix s- for ITU-I and ITU-N point codes. Table 3-7 describes the MNP SCCP Service configuration options that are contained in the SCCP-SERV table.