7 Resolved and Known Bugs

This chapter lists the resolved and known bugs for this release. These bug lists are distributed to customers with a new software release at the time of General Availability (GA), and are updated for each maintenance release.

7.1 Severity Definitions

The problem report sections in this document refer to Bug severity levels. Definitions of these levels can be found in the publication, TL 9000 Quality Management System Measurement Handbook.

Problem Report: A report from a customer or on behalf of the customer concerning a product or process defect requesting an investigation of the issue and a resolution to remove the cause. The report may be issued via any medium. Problem reports are systemic deficiencies with hardware, software, documentation, delivery, billing, invoicing, servicing or any other process involved with the acquisition, operation, or performance of a product. An incident reported simply to request help to bring back the service or functionality to normal without the intent to investigate and provide a resolution to the cause of the incident is not a problem report.
  • Critical: Conditions that severely affect the primary functionality of the product and because of the business impact to the customer requires non-stop immediate corrective action, regardless of time of day or day of the week as viewed by a customer on discussion with the organization such as
    1. product inoperability (total or partial outage),
    2. a reduction in the capacity capability, that is, traffic/data handling capability, such that expected loads cannot be handled,
    3. any loss of emergency capability (for example, emergency 911 calls), or
    4. safety hazard or risk of security breach
  • Major: Product is usable, but a condition exists that seriously degrades the product operation, maintenance or administration, etc., and requires attention during pre-defined standard hours to resolve the situation. The urgency is less than in critical situations because of a lesser immediate or impending effect on product performance, customers and the customer's operation and revenue such as
    1. reduction in product's capacity (but still able to handle the expected load),
    2. any loss of administrative or maintenance visibility of the product and/or diagnostic capability,
    3. repeated degradation of an essential component or function, or
    4. degradation of the product's ability to provide any required notification of malfunction
  • Minor: Other problems of a lesser severity than 'critical' or 'major' such as conditions that have little or no impairment on the function of the system
  • Minor, No Loss of Service: Oracle severity beyond what is defined by TL 9000.

The numbered severity levels in the tables below correspond to these definitions:

  • 1 - Critical
  • 2 - Major
  • 3 - Minor
  • 4 - Minor, No Loss of Service

7.2 Resolved Bug List

The resolved bugs table shows an impact statement for severity 1 and 2 bugs as well as for severity 3 bugs that are associated with an SR.

EPAP Release 17.0.0.5.0-170.27.0

The following table lists the bugs resolved in EPAP build 17.0.0.5.0-170.27.0:

Table 7-1 EPAP Release 17.0.0.5.0-170.27.0 Resolved Bugs (November 2024)

Bug SR Severity Title Customer Impact
35554295 Y 2 cpDiskCfg command no longer works in new release If a disk fails, the disk replacement procedure will not work.
35651332 N 3 DSM configuration menu failing in EPAP with backup sync network  
36749074 N 3 Update SYNC network vlan.sync.single_pair_switch.t1200.conf  
36749136 N 3 Update SYNC network vlan.sync.e5appb.conf  
37143914 N 3 EPAP Delay provisioning observed sometimes  
37147292 N 3 Reverting wait_timeout value in my.cnf to 1 day (86400 sec)  
35926236 N 4 DIU upgrade support in EPAP DIU upgrade is not supported for EPAP 17.0.0.5.0. DIU upgrade will be supported in a future release .
36507284 N 4 List pdbi connection shows different port on GUI and CLI  
36782024 N 4 Upgrade krb5-libs and krb5-devel package  
37152172 N 4 Update packages krb5-devel, krb5-libs and libkadm5 to latest version  
37178694 N 4 Update TPD to the latest version TPD.install-8.10.1.0.0_150.3.0  

EPAP Release 17.0.0.4.0-170.25.0

The following table lists the bugs resolved in EPAP build 17.0.0.4.0-170.25.0:

Table 7-2 EPAP Release 17.0.0.4.0-170.25.0 Resolved Bugs (April 2024)

Bug SR Severity Title Customer Impact
36146354 N 4 Added changes to support latest MySql version (8.0.35)  
36313234 N 4 Update mysql ,meb from 8.0.27 to mysql 8.0.35  
36313258 N 4 Update perl-PAR and perl-PAR-Packer to latest  
36413129 N 4 Update TPD 8.9 To Latest TPD 8.9.0.1.0_130.6.0  
36424808 N 4 Update jquery to version 3.7.1  

Table 7-3 EPAP Release 17.0.0.3.0-170.21.0 Resolved Bugs (March 2024)

Bug SR Severity Title Customer Impact
35926446 N 4 Remove perl-newt package from EPAP  
36011978 N 4 Update TPD, Perl-DBD, MySQL, linux-sedevel, and zlib-devel to latest  
36194730 N 4 Update TKLCswitchconfig rpms for updated tpd migration from perl-newt to curses  
36215285 N 4 Update TPD 8.8 To Latest TPD 8.9.0.0.0_130.3.0-OracleLinux8.9-x86_64.iso  
36215295 N 4 Update openssl and opendevel to latest 1.1.1k 12.el8_9  
36215305 N 4 Update zlib-devel package to latest  
36215313 N 4 Update TKLCvlanconfig for redundant log issue  

EPAP Release 17.0.0.2.0-170.16.0

The following table lists the bugs resolved in EPAP build 17.0.0.2.0-170.16.0:

Table 7-4 EPAP Release 17.0.0.2.0-170.16.0 Resolved Bugs (October 2023)

Bug SR Severity Title Customer Impact
35588980 N 3 Unexpected Act/Spr state observed in ha failover  
35638447 N 4 Update perl-PAR-Packer, Module-Scandeps and jquery  
35712885 N 4 EPAP MR 17.0.0.2.0: Update TPD 8  
35812611 N 4 Support More Than One PDB Backup  

EPAP Release 17.0.0.1.0-170.13.0

The following table lists the bugs resolved in EPAP build 17.0.0.1.0-170.13.0:

Table 7-5 EPAP Release 17.0.0.1.0-170.13.0 Resolved Bugs (June 2023)

Bug SR Severity Title Customer Impact
35418491 N 4 Update TPD to TPD.install-8.6.0.1.0_110.9.0  

EPAP Release 17.0.0.0.0-170.12.0

The following table lists the bugs resolved in EPAP build 17.0.0.0.0-170.12.0:

Table 7-6 EPAP Release 17.0.0.0.0-170.12.0 Resolved Bugs (March 2023)

Bug SR Severity Title Customer Impact
34311241 Y 2 Auto PDB restart script is not working as expected PDB will not be restarted and will require customer action to regain functionality.
27684300 N 3 EPAP16.2_FOA:Incorrect information displayed to user in queryserver.log  
30080794 Y 3 SR: Disk space shortage in /var. Space usage error growing quickly No impact to EPAP functionality. /var is used to store cron logs and some operating system files.
31613958 N 3 EPAP_16.4_FT:RTDB Reload from PDBA failing on a High Capacity DB.  
32231234 N 3 Problem in PROV to Non-PROV conversion using epapconfig menu  
24910416 N 4 EPAP16.1_MR:Errors observed in cgi.dbg on configuring PDB.  
26149567 N 4 EPAP16.2_ST: Need space in between IMEIBlock in view PDBA area.  
26335498 N 4 EPAP16.2_ST:Error observed for mate during reset.Replication needs to be updated.  
26337529 N 4 EPAP16.2_ST: SNMP read & write community can be updated without stopping EPAP  
31648791 N 4 Migrate EPAP to using OpenSSL 1.1.1, latest version  
32573502 Y 4 SR: Not able to configure remote PDB from epapconfig menu, mysql.user column count mismatch error observed  
33369060 N 4 Uplift MySQL to version 8  
33833992 N 4 Change MySQL Engine to InnnoDB  
34103096 Y 4 Extra logging in pdba.dbg when NE is updated with DN  
34217122 N 4 Migrate EPAP to TPD 8.X  
34750069 Y 4 lsblset value should not be in rtrv_sub response by default  
34834499 N 4 Update perl-PAR and jquery  

7.3 Customer Known Bug List

EPAP Release 17.0 Customer Known Bugs

The following table lists the known bugs and associated customer impact statements.

Table 7-7 EPAP Release 17.0 Customer Known Bugs (November 2024)

Bug # SR Sev Title Customer Impact
27722102 N 3 EPAP16.2_FOA:Disaster Recovery not working on a Sync Redundant setup No Impact to customer operations.
32319917 N 3 SR- Frequent switchover in EPAP state observed in EPAP Customers lose functionality to update Eagle which may impact calls.
33507358 N 3 Backup fails to transfer to remote server Customer must use a credential that does not use $.
25644469 N 4 Dangling asd in pdb.asd table. When multiple DNs are added at the same time from the "Add DN" screen in the GUI and the main DN is then deleted, the remaining DNs from the prior add command will have an invalid ASD value.
28486363 N 4 EPAP16.3_ST:Data replicated to standby PDB when ROP is run with noStandby ROP data is always replicated to the standby node if the gmt command is ever executed without the --noStandby option.
28595734 N 4 Provide Read Access to OTHER users also for certain log files Certain log files are only viewable by the epapdev and root users. Other users will not be able to read these files.