1. EAGLE Application Processor Administration Guide
  2. E5-APP-B Card Removal

A E5-APP-B Card Removal

This appendix describes the procedure to shut down the EPAP prior to removing the E5-APP-B card.

A.1 Shutting Down the EPAP and Removing the E5-APP-B Card

The EPAP application must be shut down prior to removing an E5-APP-B card. Perform the following procedure to properly remove the card:
  1. Stop the EPAP service.
  2. Stop the PDBA service.
  3. Execute the shutdown command.
  4. Slide the front switch and remove the card once all LEDs turn off (see "Removing an E5-APP-B Card" in Application B Card Hardware and Installation Guide).