Before you upgrade the Oracle Key Vault server, perform a one-time backup to a remote destination so that you can recover data in case the upgrade fails.

To ensure a smooth upgrade to Oracle Key Vault, you should prepare the server you are upgrading.

1. In the server where Oracle Key Vault is installed, log in as user support, and then switch to the root user.
2. Ensure that the server meets the minimum disk space requirement, 6 GB of free disk space, for an upgrade.
3. You need to disable diagnostics by clicking Clear from the Download Diagnostics page of the Oracle Key Vault management console.

   Note:

   The Clear button can be used when upgrading from Oracle Key Vault releases 21.6 or later. For upgrades from Oracle Key Vault releases 21.5 or earlier, you will need to use the clean method from the earlier utility. This can be done by running /usr/local/dbfw/bin/priv/dbfw-diagnostics-package.rb --clean and /usr/local/dbfw/bin/priv/dbfw-diagnostics-package.rb --remove commands.

4. Check the boot partition size. If any of the nodes in question have a boot partition that is less than 500 MB, then you cannot upgrade that system to the new release. You can check this size as follows:
   1. Mount the /boot partition.

      # mount /boot

   2. Check the Size column given by the following command:

      # df -h /boot

   3. Unmount the /boot partition:

      # umount /boot

   If the boot partition given by this command shows less than 488 MB, then you cannot upgrade to the current release. Oracle recommends that you restore a backup of the current configuration to a freshly installed system of the same release as the current system, and upgrade that to the new release instead.
5. If Oracle Key Vault is using the BIOS boot mode, then ensure that the disk size is not greater than 2 TB. If this is the case, then you cannot upgrade to the current release. Oracle recommends that you restore a backup of the current configuration onto a system with a disk that is less than 2 TB in size, and upgrade that to the new release instead.
6. If you need to increase available disk space, then remove the temporary jar files located in /usr/local/okv/ssl. Be careful in doing so. If you accidentally delete any files other than the jar files in /usr/local/okv/ssl, then the Oracle Key Vault server becomes non-functional.
7. Increase your disk space by extending the vg_root size:
   You must increase the disk space by extending vg_root before you perform the upgrade.
8. Ensure that no full or incremental backup jobs are running. Delete all scheduled full or incremental backup jobs before the upgrade.
9. Plan for downtime according to the following specifications:

   Oracle Key Vault Usage	Downtime required
   Wallet upload or download	NO
   Java Keystore upload or download	NO
   Transparent Data Encryption (TDE) direct connect	YES (NO with persistent cache)
   Primary Server Upgrade in a primary-standby deployment	YES (NO with persistent cache)

10. Plan for downtimes.
    If Oracle Key Vault uses an online master encryption key, then plan for a downtime of 15 minutes during the Oracle Database endpoint software upgrades. Database endpoints can be upgraded in parallel to reduce total downtime.
11. If the Oracle Key Vault system has a syslog destination configured, ensure that the remote syslog destination is reachable from the Oracle Key Vault system, and that logs are being correctly forwarded. If the remote syslog destination is not reachable from the Oracle Key Vault system, then the upgrade process can become much slower than normal.
12. If Oracle Audit Vault was integrated with Oracle Key Vault release 21.2 or earlier, then do the following to disable and remove the Oracle Audit Vault integration:
    1. Disable the Oracle Audit Vault integration: Log into the Oracle Key Vault management console as a System Administrator, select the System tab and then Settings from the left navigation bar. In the Monitoring and Alerts pane, select Audit Vault. In the Audit Vault integration pane that appears, disable AVDF. Click Save.
    2. Log in to the Oracle Key Vault server through SSH as user support, switch user su to root and then switch user su to oracle.
    3. Stop the agent by executing the following command:

       agent_installation_directory/bin/agentctl stop

    4. Log in to the Oracle Audit Vault Server console as an Oracle Audit Vault administrator.
    5. Delete the corresponding agent and target.
    6. Log in to the Oracle Key Vault server through SSH as user support, then switch user su to root.
    7. Delete the installation directory for the Oracle Audit Vault agent.
13. If you are performing an upgrade while using an HSM as a Root of Trust, then consult Oracle Key Vault Root of Trust HSM Configuration Guide for any additional steps that may be needed.
14. Ensure that the Oracle Key Vault server certificate has not expired, nor is close to expiry, before you begin the upgrade.
    You can find how much time the Oracle Key Vault server certificate has before it expires by checking the OKV Server Certificate Expiration setting on the Configure Alerts page in the Oracle Key Vault management console.

You can upgrade a standalone Oracle Key Vault server deployment.

• About Upgrading an Oracle Key Vault Server
  In a standalone deployment you must upgrade a single Oracle Key Vault server.
• Upgrading a Standalone Oracle Key Vault Server
  A single Oracle Key Vault server in a standalone deployment is sometimes used in test and development environments for functional testing.

As part of the upgrade, you must reenroll endpoints created in earlier releases of Oracle Key Vault, or update the endpoint software.

1. If you are upgrading the endpoint software for an Oracle database configured for online TDE master encryption key management, then shut down the database.
2. Download the endpoint software (okvclient.jar) for your platform from the Oracle Key Vault server as follows:
   1. Go to the Oracle Key Vault management console login screen.
   2. Click the Endpoint Enrollment and Software Download link.
   3. In the Download Endpoint Software Only section, select the appropriate platform from the drop-down list.
   4. Click the Download button.
3. Identify the path to your existing endpoint installation that you are about to upgrade (for example, /etc/ORACLE/KEYSTORES/okv (where /etc/ORACLE/KEYSTORES is WALLET_ROOT of your database, or the softlink in $ORACLE_BASE/okv/$ORACLE_SID points to).
4. Install the endpoint software by executing the following command:

   java -jar okvclient.jar -d existing_endpoint_directory_path

   For example:

   java -jar okvclient.jar -d /etc/ORACLE/KEYSTORES/okv

5. Install the updated PKCS#11 library file.
   This step is needed only for online TDE master encryption key management by Oracle Key Vault. If an endpoint uses online TDE master encryption key management by Oracle Key Vault, then you must upgrade the PKCS#11 library while upgrading the endpoint software.
   • On UNIX/Linux platforms: Run root.sh from the bin directory of endpoint installation directory to copy the latest liborapkcs.so file for Oracle Database endpoints.

     $ sudo /etc/ORACLE/KEYSTORES/okv/bin/root.sh

     Or

     $ su - root
     # /etc/ORACLE/KEYSTORES/okv/bin/root.sh

   • On Windows platforms: Run root.bat from the bin directory of endpoint installation directory to copy the latest liborapkcs.dll file for Oracle Database endpoints. You will be prompted for the version of the database in use.

     bin\root.bat

6. Update the SDK software.
   If you have already deployed the SDK software, Oracle recommends that you redeploy the SDK software in the same location after you complete the upgrade to Oracle Key Vault release 21.8. This enables you to have access to the new SDK APIs that were introduced since the Oracle Key Vault version that you are upgrading from.
   1. Go to the Oracle Key Vault management console login screen.
   2. Click the Endpoint Enrollment and Software Download link.
   3. In the Download Software Development Kit section, select the appropriate language and platform for your site.
   4. Click the Download button to get the SDK zip file.
   5. Identify the existing location where SDK software was already deployed.
   6. Navigate to the directory in which you saved the SDK zip file.
   7. Unzip the SDK zip file.

      For example, on Linux, to unzip the Java SDK zip file, use the following command:

      unzip -o okv_jsdk.zip -d existing_endpoint_sdk_directory_path

      For the C SDK zip file, use this command:

      unzip -o okv_csdk.zip -d existing_endpoint_sdk_directory_path

   8. Do not exit this page.
7. If you had deployed the RESTful services utility in the previous release, then re-deploy the latest okvrestclipackage.zip file.
   The latest okvrestclipackage.zip file enables you to have access to the new RESTful services utility commands that were introduced since the Oracle Key Vault version that you are upgrading from.
   You can use wget or curl to download okvrestclipackage.zip.

   wget --no-check-certificate https://Oracle_Key_Vault_IP_address:5695/okvrestclipackage.zip
   
   curl -O -k https://Oracle_Key_Vault_IP_address:5695/okvrestservices.jar

8. Start the Oracle databases if the upgrade of Oracle Key Vault endpoints for all of the TDE-enabled databases on this host machine is complete.

   The easiest way to upgrade the Oracle Key Vault client software is to re-enroll an endpoint. Re-enrolling generates a new okvclient.jar file, but maintains the relationship between the endpoint and its (default) wallet.

9. If your site requires that you restrict TDE master encryption keys from leaving Oracle Key Vault and if you are using an Oracle Real Application Clusters (Oracle RAC) environment, then perform the following steps on each Oracle RAC node:
   1. Perform the endpoint upgrade on each Oracle RAC node.
   2. Set the extractable attribute value for symmetric keys.
      By default, the extractable attribute value is true, which means that the key material of symmetric keys can be extracted from Oracle Key Vault during certain operations. If you want to prevent symmetric keys from being extracted, then you must set this value to false. You can set an extractable attribute value as follows:

      • Set the default value for the extractable attribute of new symmetric keys in the endpoint settings. Endpoint-specific setting overrides the global endpoint settings.
      • Explicitly specify the value of the extractable attribute when creating or registering a new symmetric key.
      • Modify the extractable attribute of an existing symmetric key.
      See Oracle Key Vault Administrator's Guide.
   3. As a user who has the SYSDBA or SYSKM administrative privilege, perform a rekey operation on one Oracle RAC node. Use the following syntax:

      ADMINISTER KEY MANAGEMENT SET [ENCRYPTION] KEY 
      [FORCE KEYSTORE]
      [USING TAG 'tag_name'] 
      IDENTIFIED BY [EXTERNAL STORE | keystore_password;

      See Oracle Database Advanced Security Guide for more information about rekeying a TDE master encryption key.

10. If your site requires that you restrict TDE master encryption keys from leaving Oracle Key Vault and if you are using an Oracle Data Guard environment, then do the following on the primary and standby databases:
    1. Perform the endpoint upgrade on the primary and standby databases.
    2. If your site requires it, then set the extractable attribute value for symmetric keys.
       By default, the extractable attribute value is true, which means that the key material of symmetric keys can be extracted from Oracle Key Vault during certain operations. If you want to prevent symmetric keys from being extracted, then you must set this value to false. You can set an extractable attribute value as follows:

       • Set the default value for the extractable attribute of new symmetric keys in the endpoint settings. Endpoint-specific setting overrides the global endpoint settings.
       • Explicitly specify the value of the extractable attribute when creating or registering a new symmetric key.
       • Modify the extractable attribute of an existing symmetric key.
       See Oracle Key Vault Administrator's Guide.
    3. As a user who has the SYSDBA or SYSKM administrative privilege, perform a rekey operation in the primary database.

       ADMINISTER KEY MANAGEMENT SET [ENCRYPTION] KEY 
       [FORCE KEYSTORE]
       [USING TAG 'tag_name'] 
       IDENTIFIED BY [EXTERNAL STORE | keystore_password;

       See Oracle Database Advanced Security Guide for more information about rekeying a TDE master encryption key.

    Note:

    • You must run root.sh or root.bat script to install the latest Oracle Key Vault PKCS#11 library only once on a host machine that has multiple TDE-enabled Oracle databases that use Oracle Key Vault for master encryption key management.
    • Ensure that you execute the root.sh or root.batscript only after the upgrade of Oracle Key Vault endpoints for all of the TDE-enabled databases on the same host machine is complete.
    • Ensure that all of the TDE-enabled Oracle databases on this host have been shutdown.
    • If you are upgrading the endpoint software for an Oracle database configured for online TDE master encryption key management, then shut down the database.

You must perform server backup and user password tasks after completing a successful upgrade.

1. Take a full backup of the upgraded Oracle Key Vault Server Database to a new remote destination. Avoid using the old backup destination for the new backups.
2. Schedule a new periodic incremental backup to the new destination defined in the preceding step.
3. Change the Oracle Key Vault administrative passwords.
   Password hashing has been upgraded to a more secure standard than in earlier releases. This change affects the operating system passwords, support and root. You must change Oracle Key Vault administrative passwords after the upgrade to take advantage of the more secure hash.