List of Figures

• 2-1 Netra X5-2 for Communications Configuration A (4 Onboard 10 GigE Ports)
• 2-2 Netra X5-2 for Communications Configuration B (4 Onboard 10 GigE Ports & 1 Quad GigE NIC)
• 2-3 Netra 5-2 for Communications Configuration C (4 Onboard 10 GigE Ports & 2 Quad GigE NICs)
• 2-4 Connecting to USB, VGA and SER MGT (COM1) Ports
• 2-5 Connecting to ILOM Port
• 3-1 Selecting RAID Configuration
• 3-2 Begin RAID Configuration
• 3-3 Clear Any Existing RAID Configuration
• 3-4 RAID - Create Virtual Drive
• 3-5 Set Drive to RAID1
• 3-6 RAID - Select Drives
• 3-7 Select All Drives
• 3-8 Save RAID Configuration
• 3-9 Initialize RAID Configuration
• 3-10 Exit RAID Configuration
• 3-11 Oracle X7-2 Configuration A (4x10 GigE NIC)
• 3-12 Oracle X7-2 Configuration B (Two 4x10 GigE NICs)
• 3-13 Oracle X7-2 Configuration B (One QSFP and One 4x10 GigE NICs)
• 3-14 Connecting to USB and SER MGT (COM1) Ports
• 3-15 Connecting to ILOM over the Network
• 4-1 Contrast of Data Paths with and without CPU Pinning
• 5-1 Properties Dialog for OVF Deployment
• 5-2 OVF Deployment Status Dialog
• 5-3 VM Settings on Hyper-V
• 9-1 BMC - Step 3
• 9-2 BMC - Step 4
• 9-3 BMC - Step 5
• 9-4 BMC - Step 6
• 9-5 BMC - Step 7
• 9-6 BMC - Step 8
• 9-7 BMC - Step 9
• 9-8 BMC - Step 10
• 10-1 Configure and Reboot Standby First for HA Procedures
• A-1 Acme Packet 1100 - Rear View
• A-2 Acme Packet 3900 - Rear View
• A-3 Acme Packet 4600 - Rear View
• A-4 Acme Packet 6100 - Rear View
• A-5 Acme Packet 6300/6350 Management Interfaces
• A-6 Acme Packet 6300 Media Interfaces
• A-7 Acme Packet 6350 - Media Interface