|
25371165
|
The IB firmware upgrade is not supported in the BUI.
|
When running firmware 2.2, the BUI in the firmware upgrade does
not work. The BUI also does not work for upgrades and downgrades
between 2.2 firmware versions or downgrades to the 2.1 firmware.
However, the BUI in the firmware upgrade from 2.1 to 2.2
works.
Workaround: Use the ILOM CLI
upgrade and downgrade tool as a workaround.
|
|
24665004
|
The default location for the toolbox config files
(cli and fabric
conf) are not correct.
|
The default location for the toolbox config files are not in the
config directory, so if using this default location, future firmware
updates will overwrite the configuration and the user will need to
re-enter the configuration.
Workaround: Do not use the
default location for the toolbox config files, instead specify the
location that will be used for future firmware versions, which is
/config/conf/. using the toolbox
CLI.
|
|
18129290
|
smpartition command fails from firmware version
2.0 switch with firmware version 2.1 or 2.2 peer.
|
In a mixed firmware fabric where the master Subnet Manager is on a
switch with firmware version 2.0 and other gateways or switches in
the fabric are firmware version 2.1 or 2.2, issuing the
smpartition commit command fails.
Workaround: When you use the
smpartition commands to partition the mixed
firmware fabric, issue the commands from a master Subnet Manager on
a switch or gateway with firmware version 2.1 or 2.2.
|