Display Host Partition Information (Toolbox CLI)

• In the Toolbox CLI, display host partition information.

  [toolbox-cli] show hosts pname=partition_name|pkey=P_Key

  where:

  • partition_name is the partition name.

  • P_Key is the partition key.

  ---

  Note -  If the partition name or P_Key is not provided, the command returns hosts visible from the local switch, and the respective partition names and P_Keys.

  ---

  For example, to display the hosts in the Default partition, type:

  [toolbox-cli] show hosts pname=Default
  GUID                   NODE DESCRIPTION                                            PKEYS 
  ------------------     -------------------------------------------------------     ----------------------------- 
  0x002128b81684c000     SUN IB QDR GW switch nsn156-81 10.134.156.81 Bridge 0       Default(7fff) 
  0x002128ebca1ec040     SUN IB QDR GW switch nsn156-102 10.134.156.102 Bridge 1     Default(7fff) 
  0x002128b81684c040     SUN IB QDR GW switch nsn156-81 10.134.156.81 Bridge 1       Default(7fff) 
  0x002128ebca1ec000     SUN IB QDR GW switch nsn156-102 10.134.156.102 Bridge 0     Default(7fff) 
  0x0010e00001631b00     MT25408 ConnectX Mellanox Technologies                      Default(7fff) 
  0x0002c9030008e136     nsn156-54 mlx4_0                                            nm2-box1(3342), Default(7fff) 
  [toolbox-cli]

Related Information

• Start the Toolbox CLI

• hosts Object Commands

• Display All Hosts in the Fabric (Toolbox CLI)

• Display Hosts Visible From a Node (Toolbox CLI)

• Replace a GUID Manually (Toolbox CLI)

• Replace a GUID Automatically (Toolbox CLI)