Verify the Configuration

1. From host A, ping the SEFOS-1 switch.

   # ping 20.0.0.1
   20.0.0.1 is alive
   

2. From host B, ping the SEFOS-1 switch.

   # ping 20.0.0.1
   

3. From the SEFOS-1 switch, ping host A.

   SEFOS-1# ping 20.0.0.10
   

4. From the SEFOS-1 switch, ping host B.

   SEFOS-1# ping 20.0.0.20
   

5. From host C, ping the SEFOS-2 switch (20.0.0.2).

   SEFOS-1# ping 20.0.0.30
   

6. For the port connected to the switch, use a packet-capture device or dumping utility to capture packets on host A, B, and C.

   All three hosts should receive STP, GMRP, and GVRP packets continuously, unless these protocols were disabled with SEFOS commands. By default, all the ports on a target are members of default VLAN 1.

Related Information

• Configure Initial Settings

• Verify VLAN Membership