Guidelines for Configuring In-Band Management

• In-band and out-of-band must be in different subnets.

• DHCP can be configured on only one of the interfaces. Otherwise DHCP would get two default routes.

• Only one gatewayip must be configured. It can be configured either under the out-of-band or in-band settings.

  ---

  Note -  If the gateway is changed to another subnet, the current session (ssh) will stop to respond.

  ---

• If vlans will be used for the in-band configuration, then the vlan must be configured and made Active in SEFOS prior to doing in-band network configuration.