Go to main content
Index
B
- broadcast (SLP)
When to Configure for Nonrouted,
Multiple Network Interfaces
Why Deploy an SLP DA?
Configuring Broadcast-Only Routing
D
- DA discovery (SLP)
Time-out Properties
- DA heartbeat
- frequency
Modifying DA Advertising and Discovery
Frequency
- DA_BUSY_NOW
Placing Multiple DAs for Load Balancing
- DAs (SLP)
- advertising
How to Configure DA Heartbeat for Frequent
Partitions
Configuring the DA Heartbeat for Frequent
Partitions
Configuring DA Discovery for Dial-up
Networks
Modifying DA Advertising and Discovery
Frequency
- DA logging
Why Deploy an SLP DA?
- deploying
Why Deploy an SLP DA?
Relieving Network Congestion
- dial-up networks discovery
How to Configure DA Heartbeat for Frequent
Partitions
Configuring DA Discovery for Dial-up
Networks
- disable active discovery
How to Limit UAs and SAs to Statically
Configured DAs
- disable passive discovery
How to Limit UAs and SAs to Statically
Configured DAs
- discovery
Considerations When Configuring Scopes
Relieving Network Congestion
Modifying DA Advertising and Discovery
Frequency
- eliminating multicast
How to Limit UAs and SAs to Statically
Configured DAs
- heartbeat
How to Reduce SA Reregistrations
How to Configure DA Heartbeat for Frequent
Partitions
How to Configure DA Heartbeat for Frequent
Partitions
Configuring the DA Heartbeat for Frequent
Partitions
- multicast
Relieving Network Congestion
- multiple DAs
Placing Multiple DAs for Load Balancing
- removing
Configuring the DA Heartbeat for Frequent
Partitions
- without multicast
When to Configure for Nonrouted,
Multiple Network Interfaces
- directory agent (SLP)
- DA addresses
Limiting UAs and SAs to Statically
Configured DAs
- load balancing
Placing Multiple DAs for Load Balancing
- network congestion and
Relieving Network Congestion
- SLP architecture and
SLP Architecture
- when to deploy
When to Deploy DAs
- where to place
Where to Place DAs
- discovery requests (SLP)
Modifying Timeouts on SLP Discovery
Requests
E
- /etc/inet/slp.conf file
- broadcast-only routing
How to Configure Broadcast-Only Routing
- changing configuration
How to Change Your SLP Configuration
- changing interfaces
How to Configure the net.slp.interfaces Property
- DA advertisements
How to Configure DA Discovery for Dial-up
Networks
- DA heartbeat
How to Configure DA Heartbeat for Frequent
Partitions
- deploy DAs
How to Deploy DAs
- elements
SLP Configuration File: Basic Elements
- load balancing
Placing Multiple DAs for Load Balancing
- multicast time-to-live
How to Configure the Multicast
Time-to-Live Property
- new scopes
How to Configure Scopes
Deploying Scopes
- overview
SLP Configuration Considerations
- packet size
How to Configure the Packet Size
- proxy registration
How to Enable SLP Proxy Registration
- random-wait bound
How to Configure the Random-Wait Bound
- SA reregistrations
How to Reduce SA Reregistrations
- timeouts
How to Change Default Timeouts
- with static DAs
How to Limit UAs and SAs to Statically
Configured DAs
- /etc/init.d/slpd script
How to Enable SLP Proxy Registration
L
- legacy services (SLP)
- advertising
Considerations When Advertising Legacy
Services
Advertising Legacy Services
When to Advertise Legacy Services
- definition
When to Advertise Legacy Services
- libslp.so library
SLP Implementation
M
- message types
- SLP
SLP Message Types
- multicast (SLP)
- changing interfaces
Configuring the net.slp.interfaces Property
- DAs
How to Configure DA Heartbeat for Frequent
Partitions
How to Limit UAs and SAs to Statically
Configured DAs
- if disabled
When to Configure for Nonrouted,
Multiple Network Interfaces
- multihomed machines and
Multihoming Configuration for SLP
- propagation
How to Configure the Multicast
Time-to-Live Property
- service requests
Why Deploy an SLP DA?
- time–to-live property
Configuring the Multicast Time-to-Live
Property
- traffic
Why Deploy an SLP DA?
- multihomed hosts (SLP)
- broadcast-only routing
Configuring Broadcast-Only Routing
- changing interfaces
Configuring the net.slp.interfaces Property
- configuration
Multihoming Configuration for SLP
- proxy advertisement
Proxy Advertising on Multihomed Hosts
- scopes and
DA Placement and Scope Name Assignment
- unicast routing disabled
Configuring the net.slp.interfaces Property
- without multicast
Why Deploy an SLP DA?
N
- net.slp.DAActiveDiscoveryInterval property
How to Limit UAs and SAs to Statically
Configured DAs- definition
DA Advertisement Timing and Discovery Request Properties
- net.slp.DAAddresses property
Placing Multiple DAs for Load Balancing
Considerations When Configuring Scopes
How to Configure DA Heartbeat for Frequent
Partitions
- definition
Limiting UAs and SAs to Statically
Configured DAs
- net.slp.DAAttributes property
Reducing SA Reregistrations
- net.slp.DAHeartBeat property
How to Reduce SA Reregistrations
How to Configure DA Heartbeat for Frequent
Partitions
- definition
DA Advertisement Timing and Discovery Request Properties
- net.slp.interfaces property
- changing interfaces
How to Configure the net.slp.interfaces Property
- configuring
Configuring the net.slp.interfaces Property
- DAs and
Where to Place DAs
- multihomed hosts and
DA Placement and Scope Name Assignment
- nonrouted interfaces and
Considerations When Configuring for
Nonrouted, Multiple Network Interfaces
- net.slp.isBroadcastOnly property
Configuring the net.slp.interfaces Property
When to Configure for Nonrouted,
Multiple Network Interfaces
How to Configure Broadcast-Only Routing
Configuring Broadcast-Only Routing
- net.slp.isDA property
Setting up slpd to Operate as a DA Server
- net.slp.MTU property
Configuring the Packet Size
- net.slp.multicastTTL property
Configuring the Multicast Time-to-Live
Property
- net.slp.passiveDADetection property
How to Limit UAs and SAs to Statically
Configured DAs- definition
DA Advertisement Timing and Discovery Request Properties
- net.slp.randomWaitBound property
Configuring the Random-Wait Bound
- net.slp.serializedRegURL property
How to Enable SLP Proxy Registration
- net.slp.useScopes property
SLP Proxy Registration File Description
Considerations When Configuring Scopes
Considerations When Configuring Scopes
- definition
Deploying Scopes
- netstat command
Using snoop to
Monitor SLP Activity
- network interfaces (SLP)
- nonrouted considerations
Considerations When Configuring for
Nonrouted, Multiple Network Interfaces
P
- packet size
- configuring for SLP
Configuring the Packet Size
- ping command
Changing Default Timeouts
- proxy advertisement (SLP)
Using SLP Proxy Registration to Advertise
Advertising Legacy Services
- proxy registration (SLP)
Using SLP Proxy Registration to Advertise
SLP Proxy Registration
- multihomed hosts
Proxy Advertising on Multihomed Hosts
R
- registration lifetime (SLP)
How to Use snoop to
Run SLP Traces
S
- SA server (SLP)
Configuring the Random-Wait Bound
- SAs (SLP)
Advertising a Service That Is Not SLP
Enabled
Configuring the net.slp.interfaces Property
Considerations When Configuring Scopes
- scopes (SLP)
- considerations
Considerations When Configuring Scopes
- DAs and
Why Deploy an SLP DA?
Configuring the DA Heartbeat for Frequent
Partitions
- default scope
Considerations When Configuring Scopes
- definition
SLP Architecture
- deploying
Deploying Scopes
- multihomed hosts and
DA Placement and Scope Name Assignment
- proxy registration and
SLP Proxy Registration
- when to configure
When to Configure Scopes
- service advertisement (SLP)
Using SLP Proxy Registration to Advertise
Reducing SA Reregistrations
- service agent (SLP)
Reducing SA Reregistrations
Limiting UAs and SAs to Statically
Configured DAs
- service discovery (SLP)
Why Deploy an SLP DA?
Time-out Properties
Configuring Broadcast-Only Routing
- service requests (SLP)
Why Deploy an SLP DA?
- service URLs
- proxy registration (SLP)
Using SLP Proxy Registration to Advertise
SLP Proxy Registration
- SLP
- advertising
Why Deploy an SLP DA?
- agents and processes
SLP Agents and Processes
- analyzing snoop slp trace
Analyzing a snoop slp Trace
- architecture
SLP Architecture
- broadcast routing
Configuring Broadcast-Only Routing
- configuration file
SLP Configuration File: Basic Elements
Configuring SLP Properties
- configuration properties
Configuration Properties
- configuring
SLP Configuration Considerations
- daemon
SLP Implementation
- discovery requests
Modifying Timeouts on SLP Discovery
Requests
- implementation
SLP Implementation
- logging
SLP Architecture
- packet size
Configuring the Packet Size
- performance tuning
Accommodating Different Network Media,
Topologies, or Configurations
- planning deployment
SLP Configuration Considerations
- SLP message types
SLP Message Types
- SLP status codes
SLP Status Codes
- slp.conf file
- comments
Comment Lines and Notations
- slp.jar library
SLP Implementation
- slpd.conf file
Considerations When Configuring Scopes
Limiting UAs and SAs to Statically
Configured DAs
- slpd daemon
Considerations When Advertising Legacy
Services
SLP Proxy Registration
Advertising Legacy Services
- changing interfaces
Configuring the net.slp.interfaces Property
- DAs
Configuring the Random-Wait Bound
- heartbeat
Configuring the DA Heartbeat for Frequent
Partitions
- multihomed machines and
Multihoming Configuration for SLP
- proxy advertisement and
Proxy Advertising on Multihomed Hosts
- removing DAs
Configuring the DA Heartbeat for Frequent
Partitions
- SA server
Configuring the Random-Wait Bound
- scopes and
Considerations When Configuring Scopes
- static DAs and
Limiting UAs and SAs to Statically
Configured DAs
- SLPv2
- interoperability with SLPv1
Why Deploy an SLP DA?
- snoop command
- monitoring retransmission
Configuring the Random-Wait Bound
- multiple SLP requests and
Configuring the net.slp.interfaces Property
- SLP service registration and
Reducing SA Reregistrations
- SLP traffic and
Placing Multiple DAs for Load Balancing
- using with SLP
Analyzing a snoop slp Trace
How to Use snoop to
Run SLP Traces
Using snoop to
Monitor SLP Activity
- status codes, SLP
SLP Status Codes
T
- timeouts (SLP)
Why Deploy an SLP DA?
Changing Default Timeouts
Modifying Timeouts on SLP Discovery
Requests
- tuning SLP performance
Accommodating Different Network Media,
Topologies, or Configurations
U
- UAs
- requests
Reducing SA Reregistrations
- UAs (SLP)
Why Deploy an SLP DA?
Using snoop to
Monitor SLP Activity
- requests timeout
Placing Multiple DAs for Load Balancing
- UDP/TCP unicast (SLP)
Multihoming Configuration for SLP
- unicast routing (SLP)
Multihoming Configuration for SLP- disabled
Configuring the net.slp.interfaces Property
- user agent (SLP)
Limiting UAs and SAs to Statically
Configured DAs