| Sun Ethernet Fabric Operating System CLI Enterprise Reference Manual
|
   
|
RRD6 |
RRD6 allows different routing protocols to exchange IPv6 routing information.
11.1 RRD6 Commands
The list of CLI commands for the configuration of RRD6 is as follows:
11.1.1 export ospfv3
Enables redistribution of OSPF area or external routes to the protocol. The no form of the command disables redistribution of OSPF area or external routes to the protocol.
export ospfv3 {area-route | external-route} {rip}
|
no export ospfv3 {area-route | external-route} {rip}
|
|
Syntax Description
|
area-route - OSPFv3 inter-area and intra-area address/mask pairs to be exported into the routing protocol.
external-route - OSPFv3 Type 1 and Type 2 External address/mask pairs to be exported into the routing protocol.
rip - Routing information protocol.
|
|
Mode
|
Global Configuration
|
|
Example
|
SEFOS(config)# export ospfv3 area-route rip
|
11.1.2 redistribute-policy
Adds the IPv6 permit or deny redistribution policy. The no form of the command removes the IPv6 permit or deny redistribution policy.
redistribute-policy {ipv6} {permit|deny} DestIp DestRange {static | local | rip | ospf} {rip | ospf | all}
|
no redistribute-policy {ipv6} DestIp DestRange
|
|
Syntax Description
|
ipv6 - IPv6 protocol.
permit - Sets the default rule for all prefixes to permit.
deny - Sets the default rule for all prefixes to deny.
DestIp - Destination IP address.
DestRange - Destination range.
static - Static routes.
local - Local routes.
rip - Routing Information protocol.
ospf - Open Shortest Path First protocol.
all - All.
|
|
Mode
|
Global Configuration
|
|
Defaults
|
permit all
|
|
Example
|
SEFOS(config)# redistribute-policy ipv6 permit 4444::1111 64.static ospf
|
|
Notes
|
- The addresses learnt within the specified range through the specified routing protocol will be redistributed to other routing protocols.
- No routes will be exchanged between RTM and the re-distributing protocols.
|
11.1.3 default redistribute-policy
Sets the default behavior of the RRD6 control table.
default redistribute-policy {ipv6} {permit | deny}
|
|
Syntax Description
|
ipv6 - IPv6 protocol.
permit - Sets the default rule for all prefixes to permit.
deny - Sets the default rule for all prefixes to deny.
|
|
Mode
|
Global Configuration
|
|
Example
|
SEFOS(config)# default redistribute-policy ipv6 permit
|
11.1.4 throt
Configures the maximum number of routes processed for every iteration.
|
Mode
|
Global Configuration
|
|
Defaults
|
1000
|
|
Example
|
SEFOS(config)# throt 100
|
11.1.5 show redistribute-policy ipv6
Displays the route redistribution filters
show redistribute-policy ipv6
|
|
Mode
|
Privileged EXEC
|
|
Example
|
SEFOS# show redistribute-policy ipv6
Destination Range SrcProto DestProto Flag
----------- ----- -------- ----------- ----
3434::1111 64 static rip Deny
:: 128 all others Allow
|
11.1.6 show redistribute information ipv6
Displays the RTM6 RRD status for registered protocols.
show redistribute information ipv6
|
|
Mode
|
Privileged EXEC
|
|
Example
|
SEFOS# show redistribute information ipv6
Current State is enabled
ProtoName OspfAreaRoutes OspfExtRoutes
--------- -------------- -------------
local Disable Disable
static Disable Disable
rip Enable Enable
|
- export ospfv3 - Enables redistribution of OSPF area/External routes to the protocol
| Sun Ethernet Fabric Operating System CLI Enterprise Reference Manual
|
E26514-03
|
|
Copyright © 2013, Oracle and/or its affiliates. All rights reserved.