Configure the NetBIOS Node Type

This pool-specific option is offered to DHCP clients as a configuration parameter. This option is offered to DHCP clients in the pool only when there is no host-specific option for the client. If this option is not configured and there is no host option, the global option is used.

In this example, the address pool is pool 1, and the NetBIOS node type is b-node.

1. Create the address pool.

   SEFOS# configure terminal
   SEFOS(config)# ip dhcp pool 1

2. Configure the NetBIOS node type.

   SEFOS(dhcp-config)# netbios-node-type
   SEFOS(dhcp-config)# end

3. Ensure that the NetBIOS node type has been configured.

   SEFOS# show ip dhcp server pools

   The output in switch 1 is:

   Pool Id                         : 1
   -------------------------------------------
   Subnet                          : 12.0.0.0
   Subnet Mask                     : 255.0.0.0
   Lease time                      : 95400 secs
   Utilization threshold           : 50%
   Start Ip                        : 12.0.0.1
   End Ip                          : 12.0.0.100
   Exclude Address Start IP        : 12.0.0.1
   Exclude Address End IP          : 12.0.0.10
    
   Subnet Options
   --------------
   Code       :     1, Value      : 255.0.0.0
   Code       :     6, Value      : 12.0.0.6
   Code       :    15, Value      : future
   Code       :    46, Value      : 1