| Skip Navigation Links | |
| Exit Print View | |
|
Sun Ethernet Fabric Operating System DHCP Administration Guide |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Ethernet Fabric Operating System DHCP Administration Guide |
Enabling and Disabling the DHCP Server
Specify the Amount of Time After Which an IP Address Is Made Available
Configuring DHCP Global Options
Configure the Utilization Threshold
Create an Excluded Address in the Pool
Configuring Pool-Specific Options
Configure a Domain Name Option
Configure the NetBIOS Name Server
Configure the NetBIOS Node Type
Remove a Configured Default Router Subnet Option
Configure Options Specific to Address Pools
Configure Host-Specific Options
Enabling and Disabling Debug Traces for the DHCP Server
Enable Debug Traces for the DHCP Server
Disable Debug Traces for the DHCP Server
Configuring an Interface to Acquire or Use an IP Address
Configure an Interface to Acquire a Dynamic IP Address
Delete a Binding Entry From the Server
Configure an Interface to Use a Manual IP Address
Configure a DHCP Server Address
Configuring Relay Agent Options
Enable the Relay Agent Information
Configure Relay Agent Suboptions
Enable Traces for the DHCP Relay Agent
Acquire an IP Address From a Server Residing Outside the Client Network
In this example, the address pool is pool 1, the network is 12.0.0.0, the mask is 255.0.0.0, and the end IP is 12.0.0.0.
SEFOS# configure terminal SEFOS(config)# ip dhcp pool 1
SEFOS(dhcp-config)# network 12.0.0.0 255.0.0.0 12.0.0.100 SEFOS(dhcp-config)# end
SEFOS# show ip dhcp server pools
The output in switch 1 is:
Pool Id : 1 ------------------------------------------- Subnet : 12.0.0.0 Subnet Mask : 255.0.0.0 Lease time : 3600 secs Utilization threshold : 75% Start Ip : 12.0.0.1 End Ip : 12.0.0.100
|