Go to main content

Sun Server X4-4 Installation Guide

Exit Print View

Documentation Home » Sun Server X4-4 Documentation Library » ... » Connecting to Oracle ILOM » Modifying Network Settings for Oracle ILOM

Updated: October 2015

Sun Server X4-4 Installation Guide

Document Information

Using This Documentation

Installation Procedure Overview

Server Features and Components

Preparing to Install the Server

Installing the Server Into a Rack

Cabling the Server

Connecting to Oracle ILOM

Oracle ILOM Hardware and Interfaces

Oracle ILOM Network Defaults

Logging In to Oracle ILOM

Log In to Oracle ILOM Using a Local Serial Connection

Log In to Oracle ILOM Using a Remote Ethernet Connection

Modifying Network Settings for Oracle ILOM

Modify Network Settings From the Oracle ILOM CLI

Modify Network Settings From the Oracle ILOM Web Interface

Testing Network Settings for Oracle ILOM

Test IPv4 or IPv6 Network Configuration From the Oracle ILOM CLI

Test IPv4 or IPv6 Network Configuration From the Oracle ILOM Web Interface

Exit Oracle ILOM

Troubleshooting the Service Processor Connection

Reset the Service Processor Using Oracle ILOM

Resetting the Service Processor Using the SP Reset Switch

Recover Root Account Password

Setting Up Software and Firmware Using Oracle System Assistant

Configure Server Drives for OS Installation

Configuring the Preinstalled Oracle Solaris OS

Configuring the Preinstalled Oracle Linux OS

Configuring the Preinstalled Oracle VM Software

Getting Server Firmware and Software

Controlling System Power and Viewing BIOS Messages

Troubleshooting Installation Issues

Please tell us how to improve our documentation:

Terms of Use | Your Privacy Rights | | Ad Choices

Thank you for your feedback! If you want to participate in content improvement and share additional information, please click Feedback button.

Rate this document:

Language:

Modifying Network Settings for Oracle ILOM

The procedures in this section describe how to modify Oracle ILOM network settings.

To modify network setting from the Oracle ILOM CLI, see Modify Network Settings From the Oracle ILOM CLI.
To log in remotely, use the IP address, hostname, or IPv6 local link name assigned to the server SP and follow the instructions in Modify Network Settings From the Oracle ILOM Web Interface.

Copyright © 2014, 2015, Oracle and/or its affiliates. All rights reserved.