Go to main content
Index
A
- actions
SMF Service
- admin layer
- Showing Configuration Customizations
- Repository Layers
- authorizationsService Management Privileges
- auxiliary service stateService States
B
- backupsRepository Backups
- boot backupsRepository Backups
- boot command
- milestone optionSpecifying the SMF Milestone to Which to Boot
- none milestoneHow to Investigate Problems Starting Services at System Boot
- booting
- current milestoneSMF Boot Milestones and Corresponding Run Levels
- logging levelsSpecifying the Amount of Startup Messaging
- milestonesSpecifying the SMF Milestone to Which to Boot
- to an SMF milestoneHow to Investigate Problems Starting Services at System Boot
- without starting servicesHow to Investigate Problems Starting Services at System Boot
- bundle supportDeleting Non-Administrative Configuration
- bundlesService Bundles
C
- child serviceService Models
- composed view
- Listing Instance and Inherited Properties Currently in Use
- Service Configuration Repository
- config property groupService Properties and Property Groups
- configuration
- adding property groups and propertiesAdding Property Groups, Properties, and Property Values
- adding property valuesSetting Property Values
- deleting bundle-supported configurationDeleting Non-Administrative Configuration
- deleting customizations
- Deleting Customizations
- Deleting Property Groups, Properties, and Property Values
- deleting propertiesDeleting Property Groups, Properties, and Property Values
- deleting property groupsDeleting Property Groups, Properties, and Property Values
- deleting property valuesDeleting Property Groups, Properties, and Property Values
- maskingDeleting Non-Administrative Configuration
- modifyingConfiguring Services
- refreshingRereading Service Configuration
- setting property valuesSetting Property Values
- unmaskingDeleting Non-Administrative Configuration
- configuration files
- Configuration Files and SMF Services
- Introduction to the Service Management Facility
- configuration repository Seeservice configuration repository
- contract serviceService Models
- customizations
- listingShowing Configuration Customizations
D
- daemon serviceService Models
- default restarterMaster Restarter Daemon
- degraded service state
- Marking an Instance as Degraded or in Maintenance
- How to Repair an Instance That Is Degraded
- Service States
- delegated restartersDelegated Restarters
- delete a serviceDeleting a Service
- dependencies
- Service Dependencies
- Service States
- effect on the state of a dependent serviceShowing Whether a Service Will Automatically Restart
- groupingsDependency Groupings
- instances that a service depends onListing Instances That a Service Depends On
- instances that depend on a serviceListing Instances That Depend on a Service
- listingShowing Service Dependencies
- describe subcommand
- svccfg commandShowing Descriptions of Properties and Property Groups
- disable a serviceStopping a Service
- disabled service stateService States
E
- /etc/inetd.conf file
- Converting inetd Services to SMF Services
- Modifying Services that are Configured by a File
- Configuration Files and SMF Services
- /etc/init.d scriptsConfiguration Files and SMF Services
- /etc/inittab entriesConfiguration Files and SMF Services
- /etc/rc?.d scriptsConfiguration Files and SMF Services
- /etc/svc/profile/ directoryRepository Layers
- editing viewListing Specified Properties or Property Groups in the Editing View
- enable a serviceStarting a Service
- enterprise-profile layerRepository Layers
- environment variables
- modifying in methodsHow to Modify an Environment Variable for a Service Process Environment
- error loggingViewing Service Log Files
- event notificationConfiguring Notification of State Transition and FMA Events
F
- Fault Management Resource Identifier SeeFMRI
- FMRI
- service and instanceService Names
G
- general property groupService Properties and Property Groups
- goal serviceService Models
- goal services
- adding and changing goalsChanging the Goals of a Goal Service
I
- incomplete service stateService States
- inetadm commandConverting inetd Services to SMF Services
- examplesModifying Services that are Controlled by
inetd
- inetconv commandConverting inetd Services to SMF Services
- inetd.conf file
- Converting inetd Services to SMF Services
- Configuration Files and SMF Services
- inetd commandConverting inetd Services to SMF Services
- inetd Internet services restarter daemonDelegated Restarters
- inetd service
- adding instancesModifying Services that are Controlled by
inetd
- convert to SMF serviceConverting inetd Services to SMF Services
- modifying propertiesModifying Services that are Controlled by
inetd
- init states Seerun levels
- init.d scriptsConfiguration Files and SMF Services
- initial snapshotRepository Snapshots
- inittab entriesConfiguration Files and SMF Services
- instancesSMF Service
- addingAdding Service Instances
- namingService Names
L
- layersRepository Layers
- admin layerShowing Configuration Customizations
- manifest layerShowing Configuration Customizations
- site-profile layerShowing Configuration Customizations
- legacy_run service stateListing All Enabled Services
- libscf libraryService Configuration Repository
- listcust subcommand
- svccfg command
- Showing Configuration Customizations
- Listing Service and Instance Values in the Editing View
- listpg subcommand
- svccfg commandShowing Property Groups and Their Types
- listprop subcommand
- svccfg commandListing Service and Instance Values in the Editing View
- listsnap subcommand
- svccfg commandShowing Values in a Specified Snapshot
- log filesViewing Service Log Files
- lrc servicesConfiguration Files and SMF Services
M
- maintenance service state
- Marking an Instance as Degraded or in Maintenance
- How to Repair an Instance That Is in Maintenance
- Service States
- manifest-import backupsRepository Backups
- manifest-import service configuration refreshRereading Service Configuration
- manifest layer
- Showing Configuration Customizations
- Repository Layers
- manifestsSMF Service
- standard locationService Bundles
- masked configurationDeleting Non-Administrative Configuration
- masked entities
- Deleting a Service
- Showing Configuration Customizations
- master restarter daemonMaster Restarter Daemon
- methodsSMF Service
- milestone servicesSMF Service
- milestones
- bootingSpecifying the SMF Milestone to Which to Boot
- corresponding run levelsSpecifying the SMF Milestone to Which to Boot
- currently bootedSMF Boot Milestones and Corresponding Run Levels
- noneHow to Investigate Problems Starting Services at System Boot
N
- nested property groups See Alsoproperty groups
- properties
- Setting the Value of a Property in a Nested Property Group
- Showing Properties in a Nested Property Group
- node-profile layerRepository Layers
- non-persistent propertiesShowing the Layer Where a Value Is Set
- non-persistent property groupsShowing Property Groups and Their Types
- notification configurationConfiguring Notification of State Transition and FMA Events
- notification parameters
- displayingShowing Event Notification Parameters
O
- offline service state
- How to Repair an Instance That Is Offline
- Service States
- online service stateService States
P
- periodic serviceService Models
- schedulingHow to Schedule a Periodic or Scheduled Service
- periodic-restarter periodic services restarter serviceDelegated Restarters
- permissionsService Management Privileges
- previous snapshotRepository Snapshots
- privilegesService Management Privileges
- profilesSMF Service
- creatingCreating SMF Profiles
- packagingDelivering Configuration to Multiple Systems
- site directoryService Bundles
- standard locationService Bundles
- properties
- Inspecting Service Configuration
- Service Configuration Repository
- Service Properties and Property Groups
- composed view of
- Listing Instance and Inherited Properties Currently in Use
- Service Configuration Repository
- editing view ofListing Specified Properties or Property Groups in the Editing View
- in the running snapshotListing Instance and Inherited Properties Currently in Use
- names with reserved characters
- Setting a Property Whose Name Contains Special Characters
- Listing Properties Whose Names Include Special Characters
- non-persistentShowing Property Groups and Their Types
- property groups
- Inspecting Service Configuration
- Service Properties and Property Groups
- nested
- Setting the Value of a Property in a Nested Property Group
- Showing Properties in a Nested Property Group
- Service Properties and Property Groups
- non-persistentShowing Property Groups and Their Types
- parent
- Setting the Value of a Property in a Nested Property Group
- Showing Properties in a Nested Property Group
- Service Properties and Property Groups
- typeShowing Properties in a Property Group Type
R
- rc?.d scriptsConfiguration Files and SMF Services
- refresh service configurationRereading Service Configuration
- remove a serviceDeleting a Service
- repository Seeservice configuration repository
- resolv.conf fileConfiguration Files and SMF Services
- restart a serviceRestarting a Service
- restart the manifest-import serviceRestarting a Service
- restarter property groupService Properties and Property Groups
- restarters
- Service Restarters
- SMF Service
- default restarterMaster Restarter Daemon
- delegated restartersDelegated Restarters
- inetd Internet services restarter daemonDelegated Restarters
- svc.periodicd periodic services restarter daemonDelegated Restarters
- svc.startd master restarter daemonMaster Restarter Daemon
- svc.zones zones services restarterDelegated Restarters
- restore_repository commandHow to Restore a Repository From Backup
- rights profilesService Management Privileges
- rolesService Management Privileges
- run control scriptsConfiguration Files and SMF Services
- run levels
- corresponding SMF milestonesSpecifying the SMF Milestone to Which to Boot
- currentSMF Boot Milestones and Corresponding Run Levels
- default levelSpecifying the SMF Milestone to Which to Boot
- running snapshotListing Instance and Inherited Properties Currently in Use
- running snapshotRepository Snapshots
S
- scheduled serviceService Models
- schedulingHow to Schedule a Periodic or Scheduled Service
- SCI ToolRepository Layers
- security
- disabling unneeded servicesStopping a Service
- limiting concurrent processesLimiting the Number of Concurrent Processes that are Allowed to Run
- rightsService Management Privileges
- selectsnap subcommand
- svccfg commandListing Service and Instance Values in the Editing View
- service bundles
- standard locationsService Bundles
- Service Configuration Facility library, libscfService Configuration Repository
- service configuration repository
- Service Configuration Repository
- SMF Service
- backupsRepository Backups
- layersRepository Layers
- library interfacesService Configuration Repository
- modifyingConfiguring Services
- repairingDiagnosing and Repairing Repository Problems
- snapshotsRepository Snapshots
- svc.configd daemonDiagnosing and Repairing Repository Problems
- template dataService Configuration Repository
- service contractService Models
- service instancesSMF Service
- addingAdding Service Instances
- service modelsService Models
- service properties
- Inspecting Service Configuration
- Service Configuration Repository
- Service Properties and Property Groups
- service property groups
- Inspecting Service Configuration
- Service Properties and Property Groups
- service restarterService Restarters
- service states
- auxiliary stateService States
- changing manually
- Marking an Instance as Degraded or in Maintenance
- Repairing an Instance That Is Degraded, Offline, or in
Maintenance
- descriptionService States
- listingListing All Enabled Services
- transitionsService States
- servicesSMF Service
- deletingDeleting a Service
- disablingStopping a Service
- enablingStarting a Service
- goalChanging the Goals of a Goal Service
- modifying configurationConfiguring Services
- namingService Names
- refreshing configurationRereading Service Configuration
- restartingRestarting a Service
- startingStarting a Service
- stoppingStopping a Service
- single-user loginDiagnosing and Repairing Repository Problems
- site-profile layer
- Showing Configuration Customizations
- Repository Layers
- SMF database
- Seeservice configuration repository
- Seeservice configuration repository
- snapshots
- Showing Values in a Specified Snapshot
- Listing Service and Instance Values in the Editing View
- initialRepository Snapshots
- previousRepository Snapshots
- revertingReverting Snapshots
- running snapshotListing Instance and Inherited Properties Currently in Use
- runningRepository Snapshots
- startRepository Snapshots
- updating running configurationRereading Service Configuration
- start a serviceStarting a Service
- start property groupService Properties and Property Groups
- start snapshotRepository Snapshots
- STATE columnListing All Enabled Services
- state transition notificationConfiguring Notification of State Transition and FMA Events
- stop a serviceStopping a Service
- sulogin commandDiagnosing and Repairing Repository Problems
- svc.configd repository daemonDiagnosing and Repairing Repository Problems
- svc.periodicd periodic services restarter daemonDelegated Restarters
- svc.startd master restarter daemon
- Diagnosing and Repairing Repository Problems
- Master Restarter Daemon
- svc.zones zones services restarterDelegated Restarters
- svc:/milestone/goals:default serviceChanging the Goals of a Goal Service
- svc:/network/inetd Internet services restarter serviceDelegated Restarters
- svc:/system/svc/periodic-restarter periodic services restarter serviceDelegated Restarters
- svc:/system/svc/restarter:default master restarter daemonMaster Restarter Daemon
- svc:/system/zones:default zones services restarter serviceDelegated Restarters
- svcadm commandAdministering Services
- clear subcommand
- How to Force Single-User Login if the Local File System Service Fails
During Boot
- How to Repair an Instance That Is Degraded
- How to Repair an Instance That Is in Maintenance
- disable subcommandStopping a Service
- enable subcommandStarting a Service
- goals subcommandChanging the Goals of a Goal Service
- mark subcommandMarking an Instance as Degraded or in Maintenance
- milestone subcommand
- How to Investigate Problems Starting Services at System Boot
- Specifying the SMF Milestone to Which to Boot
- refresh subcommandRereading Service Configuration
- restart manifest-import subcommand
- Deleting a Service
- Restarting a Service
- restart subcommand
- How to Repair an Instance That Is Offline
- Understanding Configuration Changes
- Restarting a Service
- svcbundle command
- creating profilesHow to Create a Profile by Using svcbundle
- svccfg command
- add subcommandAdding Service Instances
- addpg subcommandAdding Property Groups, Properties, and Property Values
- addpropvalue subcommand
- Adding Property Groups, Properties, and Property Values
- Setting Property Values
- apply subcommandImporting and Applying Manifests and Profiles
- command input fileInvoking svccfg Interactively or With a File
- delcust -M subcommandDeleting Non-Administrative Configuration
- delcust subcommand
- Deleting Customizations
- Deleting Property Groups, Properties, and Property Values
- delete subcommandDeleting a Service
- delpg subcommandDeleting Property Groups, Properties, and Property Values
- delprop subcommandDeleting Property Groups, Properties, and Property Values
- delpropvalue subcommandDeleting Property Groups, Properties, and Property Values
- describe subcommandShowing Descriptions of Properties and Property Groups
- editprop subcommandInvoking a Property Editor
- extract subcommandHow to Create a Profile by Using svccfg
- import subcommandImporting and Applying Manifests and Profiles
- interactive useInvoking svccfg Interactively or With a File
- listcust -M subcommand
- Deleting Non-Administrative Configuration
- Deleting a Service
- listcust subcommand
- Showing Configuration Customizations
- Listing Service and Instance Values in the Editing View
- listpg subcommandShowing Property Groups and Their Types
- listprop subcommandListing Service and Instance Values in the Editing View
- listsnap subcommandShowing Values in a Specified Snapshot
- refresh subcommandRereading Service Configuration
- revert subcommandReverting Snapshots
- selectsnap subcommand
- Reverting Snapshots
- Listing Service and Instance Values in the Editing View
- setenv subcommand
- How to Modify an Environment Variable for a Service Process Environment
- Setting Property Values
- setprop subcommand
- Deleting Property Groups, Properties, and Property Values
- Adding Property Groups, Properties, and Property Values
- Setting Property Values
- showing propertiesInspecting Service Configuration
- unsetenv subcommandHow to Modify an Environment Variable for a Service Process Environment
- svcprop command
- showing properties
- Listing Instance and Inherited Properties Currently in Use
- Inspecting Service Configuration
- svcs commandListing All Enabled Services
- sysconfig-profile layerRepository Layers
- sysconfig command
- create-profile subcommandHow to Create a Profile by Using sysconfig
- System Configuration Interactive (SCI) ToolRepository Layers
- system-profile layerRepository Layers
T
- template dataService Configuration Repository
- transient serviceService Models
U
- uninitialized service stateService States
- update service configurationRereading Service Configuration
W
- wait serviceService Models
Z
- zones:default zones services restarter serviceDelegated Restarters