CMDTUX Messages 4300-4399

4306

ERROR: Could not send saved messages to site

Description

While the BRIDGE or BSBRIDGE is negotiating the link level encryption parameters, messages to the remote BRIDGE are saved. An error occurred while sending these saved messages to the remote BRIDGE after the negotiation was complete.

Action

Check the network on the machine with the affected BRIDGE or BSBRIDGE.

4307

ERROR: Cannot ASCII encode password (errno = val)

Description

An error occurred while converting a non-ASCII tlisten password file into ASCII for authentication purposes.

Action

Contact your BEA TUXEDO system Technical Support.

4309

WARN: Invalid protocol response from site

Description

The tlisten on the remote site sent an invalid link level encryption negotiation opcode.

Action

The tlisten on the remote site may be attempting to circumvent link level encryption. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

4310

ERROR: Could not get first Diffie-Hellman packet

Description

The process attempting to contact the tlisten could not generate the first encryption packet.

Action

Contact your BEA TUXEDO system Technical Support.

4311

ERROR: NADDR parameter is not a correct internet address.

Description

The NADDR parameter in the NETWORK section of the UBBCONFIG file was not in the correct format.

Action

Any address in the NADDR field that starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change the NADDR field to comply with the known formats. If you believe that your address is in the proper format, contact your BEA TUXEDO system Technical Support.

4312

ERROR: NLSADDR parameter is not a correct internet address.

Description

The NLSADDR parameter in the NETWORK section of the UBBCONFIG file was not in the correct format.

Action

Any address in the NLSADDR field which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change the NLSADDR field to comply with the known formats. If you believe that your address is in the proper format, contact your BEA TUXEDO system Technical Support.

4313

ERROR: Remote node can't interpret internet address

Description

A BEA TUXEDO system release greater than or equal to Release 6.3 attempted to send an internet address to an older release.

Action

Releases of the BEA TUXEDO system prior to the Release 6.3 release do not understand the internet address naming schemes. When interoperating with an older release, the older method of specifying addresses must be used. Replace internet addresses with the older "0x" style of address.

4314

ERROR: An error occurred when val attempted to access the service manager

Description

While attempting to get the NT service name, an error occurred while opening the service manager.

Action

Contact your BEA TUXEDO system Technical Support.

4315

ERROR: An error occurred when val attempted to allocate memory

Description

While attempting to get the NT service name the task ran out of memory.

Action

Check the memory on the system where the command was run. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support.

4316

ERROR: An error occurred when val attempted to set the service status

Description

While attempting to set the NT service status an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4317

ERROR: An error occurred when val attempted to register the service

Description

While attempting to register the NT service an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4318

ERROR: An error occurred when val attempted to set the service status

Description

While attempting to set the NT service status an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4319

ERROR: An error occurred when val attempted to access the registry

Description

While attempting to access the NT registry an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4320

ERROR: An error occurred when val attempted to access the registry

Description

While attempting to access the NT registry an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4322

ERROR: An error occurred when val attempted to start the service

Description

While attempting to start the specified NT service an error occurred.

Action

Contact your BEA TUXEDO system Technical Support.

4323

INFO: Listener Process Started

Description

The tlisten process has started properly

Action

No action necessary.

4324

ERROR: can't create buffer - tpalloc() failed - val

Description

A memory allocation failure occurred in tmconfig

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4325

ERROR: tpcall() failed, val

Description

While tmconfig was processing a request, tpcall failed.

Action

Check the error code that tpcall returned. Check the userlog to see if any more information is available. Contact your BEA TUXEDO system Technical Support.

4328

ERROR: Memory allocation failure

Description

While tlisten was allocating memory for the network address it ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4329

ERROR: Memory allocation failure

Description

While tlisten was allocating memory for the network address it ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4330

ERROR: Illegal character in the address val

Description

An illegal tlisten network address was specified.

Action

Specify the tlisten network address with the -l option.

4331

ERROR: can't execute val

Description

The AS400 could not execute the given command.

Action

Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your BEA TUXEDO system Technical Support.

4332

ERROR: can't execute val

Description

The AS400 could not execute the given command.

Action

Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your BEA TUXEDO system Technical Support.

4333

ERROR: Memory allocation failure

Description

Memory allocation failed while building a server.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4334

ERROR: Memory allocation failure

Description

The AS400 ran out of memory in the tmloadcf process.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4335

ERROR: Memory allocation failure

Description

The AS400 ran out of memory in the tmloadcf process.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4336

ERROR: Could not get application parameters

Description

tmconfig could not find the TUXCONFIG file or could not read the TUXCONFIG file.

Action

Ensure that the TUXCONFIG environment variable points to the appropriate configuration file. If the configuration file does not exist, it can be created from the UBBCONFIG file using tmloadcf. If it does exist, the file may be corrupted, or may have been a file generated by an older release of BEA TUXEDO system. Shut down the system, remove the file, and recreate it with tmloadcf. If the trouble persists, contact your BEA TUXEDO system Technical Support.

4337

ERROR: TUXCONFIG is not set

Description

The TUXCONFIG environment variable must be set for tmconfig to work properly

Action

Set the TUXCONFIG environment variable to point to the TUXCONFIG file of the application which you would like to configure.

4338

ERROR: TUXCONFIG is not set

Description

The TUXCONFIG environment variable must be set for ud or ud32 to work properly

Action

Set the TUXCONFIG environment variable to point to the TUXCONFIG file of the application you would like to use ud or ud32 on.

4339

ERROR: Could not get application parameters

Description

ud or ud32 could not find the TUXCONFIG file or could not read the TUXCONFIG file.

Action

Ensure that the TUXCONFIG environment variable points to the appropriate configuration file. If the configuration file does not exist, it can be created from the UBBCONFIG file using tmloadcf. If it does exist, the file may be corrupted, or may have been a file generated by an older release of BEA TUXEDO system. Shut down the system, remove the file, and recreate it with tmloadcf. If the trouble persists, contact your BEA TUXEDO system Technical Support.

4340

ERROR: Could not establish network address val - check device and address

Description

The BRIDGE process could not establish its listening address for incoming network connections.

Action

Check the NADDR and BRIDGE parameters for this machine in the NETWORK section of the configuration file.

4341

ERROR: Missing port number in the address val

Description

The BRIDGE process could not establish a connection to the remote machine and address. There may be networking problems, or the remote machine may have crashed.

Action

• Check that the remote machine is up.

• Check network connectivity between the machines.

• Check that the BRIDGE is running on the remote machine at the given address.

  The BRIDGE process will automatically reestablish a connection between the machines on demand, when possible. To prevent thrashing, the link will be suspended for five minutes if an automatic reconnect attempt fails. No further automatic reconnection attempts are made during this interval. If desired, use tmadmin(1)'s reconnect command to initiate a reconnection attempt manually. Manual attempts are allowed during the five-minute suspension interval.

4342

ERROR: Unable to reconnect to machine, address

Description

The BRIDGE process could not reconnect to machine during recovery from a networking problem.

Action

• Check that machine is up.

• Check network connectivity between the machines.

• Check that the BEA TUXEDO system is running on machine.

• The BRIDGE processes will automatically reestablish a connection between the machines on demand, when possible. To prevent thrashing, the link will be suspended for five minutes if an automatic reconnect attempt fails. No further automatic reconnection attempts are made during this interval.

• If desired, use tmadmin(1)'s reconnect command to initiate a reconnection attempt manually. Manual attempts are allowed during the five-minute suspension interval.

See Also

Messages 1375 and 1374 and tmadmin (1)'s reconnect command

4343

ERROR: Could not establish listening endpoint address

Description

tlisten could not establish an endpoint for listening at the given address.

Action

Ensure that the listening endpoint is free for use by the tlisten process. If it is not, choose a different endpoint. On some operating systems, there is a long delay while the listening port is cleared. Wait 5 minutes, and try the command again.

4344

ERROR: Can't put FLDTBLDIR32 into environment

Description

An error occurred while tmconfig32 was setting the FLDTBLDIR32 variable.

Action

Contact your BEA TUXEDO system Technical Support.

4345

ERROR: Can't put FIELDTBLS32 into environment

Description

An error occurred while tmconfig32 was setting the FLDTBLDIR32 variable.

Action

Contact your BEA TUXEDO system Technical Support.

4346

ERROR: Cannot run command on /etc/passwd

Description

command (tpaddusr, tpmodusr, or tpdelusr) was run with a filename of /etc/passwd. These commands may delete important information from /etc/passwd and cannot be used to modify it directly.

Action

Modify the /etc/passwd file directly using a text editor or use a different user file.

4348

ERROR: An error has occurred in completing the MIB request

Description

The sbbl was not able to finish a MIB request. The DBBL or BBL sent a message to that effect to the requestor.

Action

Check the log for related messages.

4349

ERROR: Memory allocation failure

Description

While checking the status of the sbbl process, the DBBL or BBL ran out of memory.

Action

Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4350

INFO: BBL started on machine - Release val

Description

This message indicates that a new machine has been booted and records the internal release number. This information may be useful to BEA TUXEDO system support, if necessary.

Action

No action necessary.

4351

INFO: BBL on machine - Release val

Description

This message is printed by the DBBL during the first sanity check after midnight for each booted machine. This information may be useful to BEA TUXEDO system support, if necessary.

Action

No action necessary.

4352

WARN: Service name must be <= len characters in length; val will be truncated

Description

While building a server, one of the specified service names is longer than the maximum allowed. The name will be truncated.

Action

No action is required. However, it is recommended that the name be shortened to the maximum allowed, as indicated by the message.

4353

ERROR: Port number cant be bigger than max-port in the address address

Description

The port number portion of address is too large.

Action

Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. port_number must be less than max-port. Ensure that the port_number portion of address complies with this limit.

4354

ERROR: Can't parse the address address

Description

While attempting to resolve address, an error occurred.

Action

Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server.

4355

ERROR: Unable to determine license level

Description

An error occurred while retrieving the current license attributes.

Action

Contact your BEA TUXEDO system Technical Support.

4356

ERROR: No license for /Events

Description

You do not have a license to use /Events.

Action

Purchase a license for /Events. If you believe that you own and have installed the license for /Events, contact your BEA TUXEDO system Technical Support.

4357

ERROR: Unable to determine license level

Description

An error occurred while retrieving the current license attributes.

Action

Contact your BEA TUXEDO system Technical Support.

4358

ERROR: No license for /Events

Description

You do not have a license to use /Events.

Action

Purchase a license for /Events. If you believe that you own and have installed the license for /Events, contact your BEA TUXEDO system Technical Support.

4359

ERROR: Unable to determine license level

Description

An error occurred while retrieving the current license attributes.

Action

Contact your BEA TUXEDO system Technical Support.

4360

ERROR: No license for Transactions

Description

You do not have a license to use Transactions.

Action

Purchase a license for Transactions. If you believe that you own and have installed the license for Transactions, contact your BEA TUXEDO system Technical Support.

4363

ERROR: Unable to allocate message buffter

Description

Message allocation failed for getting a message buffer by sbbl when sending message to DBBL to update sbbl sanity table.

Action

Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4364

ERROR: Can not get DBBL record from BB

Description

sbbl cannot find DBBL entry in the Bulletin Board. The Bulletin Board may be corrupted.

Action

Contact your BEA TUXEDO system Technical Support.

4365

ERROR: Can not send msg to DBBL

Description

sbbl cannot send message to DBBL to update sbbl sanity table.

Action

Contact your BEA TUXEDO system Technical Support.

4366

ERROR: An error has occurred in completing the MIB request

Description

DBBL took actions to send an error message to the blocking MIB operation requestor when DBBL found an expired entry in the sbbl sanity table. The possible cause could be sbbl cannot successfully register with Bulletin Board.

Action

Reduce the number of blocking MIB operation at the same time. If the problem still occurs contact your BEA TUXEDO system Technical Support.

4367

ERROR: An error has occurred in completing the MIB request

Description

sbbl took actions to send an error message to the blocking MIB operation requestor when sbbl cannot successfully register with Bulletin Board as a regular client process.

Action

Reduce the number of blocking MIBS operation at the same time. If the problem still occurs contact your BEA TUXEDO system Technical Support.

4368

ERROR: Could not allocate internal TPINIT typed buffer

Description

Memory allocation failed for getting a TPINIT buffer by sbbl when registering with Bulletin Board as a regular client.

Action

Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4369

WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val

Description

The value used for DBBLWAIT (* 2) is greater than the value in BLOCKTIME.

Action

Check the values used for both variables and adjust accordingly.

4370

WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val

Description

The value used for DBBLWAIT (* 2) is greater than the value in BLOCKTIME.

Action

Check the values used for both variables and adjust accordingly.

4371

ERROR: Can't resolve host name in address address

Description

While attempting to resolve the host name portion of address, an error occurred.

Action

Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server.

4372

ERROR: Unknown address type: address

Description

The given address does not correspond to a type known by the system.

Action

The BEA TUXEDO system understands several types of address format. Addresses which start with // must be internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the BEA TUXEDO system.

4373

ERROR: Can't resolve port number in address address

Description

While attempting to resolve the port number portion of address, an error occurred.

Action

Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server.

4374

ERROR: Can't convert the address address to binary format

Description

An error occurred while converting address to an internal binary representation.

Action

Contact your BEA TUXEDO system Technical Support.

4393

ERROR: tprealloc for TPINIT failed - reason-code

Description

ud or ud32 could not resize the TPINIT buffer

Action

ud or ud32 may attempt to resize the TPINIT buffer when there is more user authentication data than expected. reason-code may provide insight into the cause of this failure. Make sure enough memory exists on the system running ud or ud32. If it appears that there should be enough memory to ud or ud32, and this error happens consistently, contact the BEA TUXEDO system Technical Support.

4376

WARN: Incompatible license information (val)

Description

While booting a new node, the licensed features did not match those features licensed on the master node. This could potentially cause inconsistent results if the master node is migrated to this site or if certain capabilities are accessed from that site.

Action

Ensure that the license file in $TUXDIR/udataobj on each machine in the application has the same features licensed to insure consistent behavior.

4377

ERROR: Permissions violation on SET request

Description

A permissions violation has occurred while attempting to process an /AdminAPI SET request on the indicated class object. The attribute TA_BADFLD is set on the reply to indicate the field that is in violation of permissions.

Action

The administrator can tune permissions for any attribute user combination to the maximum supported by the system. However, write access is not supported on all attributes in all class object states. Therefore, the update may need to be delayed until the class object is in a different state.

4378

ERROR: temp file creation failed

Description

Creation of a temporary file in tmconfig using crtsrcpf on the AS/400 failed.

Action

Ensure that there is sufficient space in /qsys.lib/qtemp.lib and re-run the operation.

4379

ERROR: temp file creation failed

Description

Creation of a temporary file in tmconfig using crtsrcpf on the AS/400 failed.

Action

Ensure that there is sufficient space in /qsys.lib/qtemp.lib and re-run the operation.

4382

ERROR: You do not have a valid SDK license

Description

buildserver(1) was running without having a valid BEA TUXEDO system SDK license (e.g., only an RTK license was installed).

Action

Buy a BEA TUXEDO system SDK license.

4383

ERROR: Memory allocation failure

Description

An attempt to dynamically allocate memory from the operating system using malloc failed while parsing the UBBCONFIG file.

Action

Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4384

ERROR: Memory allocation failure

Description

An attempt to dynamically allocate memory from the operating system using malloc failed while parsing the UBBCONFIG file.

Action

Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

4385

WARN: value val does not fit in character

Description

While parsing the UBBCONFIG file, a hex escape sequence was found with a value larger than will fit in a single character (i.e., greater than 0xff).

Action

Correct the value and re-run tmloadcf(1).

4386

WARN: dubious escape val

Description

While parsing the UBBCONFIG file, a backslash escape preceding a character that is not a valid escape sequence (t, n, f, b, r, 0, backslash, n, x, or X).

Action

Correct the value and re-run tmloadcf(1).

4387

WARN: value val does not fit in character

Description

While parsing the UBBCONFIG file, an octal escape sequence was found with a value larger than will fit in a single character (i.e., greater than 0xff).

Action

Correct the value and re-run tmloadcf(1).

4388

WARN: dubious escape val

Description

While parsing the UBBCONFIG file, a backslash escape preceding a character that is not a valid escape sequence (t, n, f, b, r, 0, backslash, n, x, or X).

Action

Correct the value and re-run tmloadcf(1).

4389

ERROR: string: -F option fails to reopen stderr

Description

While running tmboot or tmshutdown on the AS/400, the program could not re-direct the standard error output into a file.

Action

Re-run the operation. Ensure that there is sufficient file space.

4390

ERROR: Cannot open file file for reading

Description

The event server couldn't open file file for reading the subscription database.

Action

The event server reads a new copy of the subscription database from the temporary file file. This message indicates that the server couldn't open the temporary file for reading. Check the file system parameters and take corrective action.

4391

ERROR: can't open input file file

Description

An error occurred attempting to open the input file specified as -ifile on the command line for ud or ud32.

Action

Make sure the input file file exists and is readable.

4392

ERROR: can't open output file file

Description

An error occurred attempting to open the output file file for write as specified by -ofile on the command line for ud or ud32.

Action

Make sure file system limit has not been exceeded and user has write permissions for the directory in which the output file is to be created.