Updating the UBBCONFIG Configuration File


	BEA Home \| Events \| Solutions \| Partners \| Products \| Services \| Download \| Developer Center \| WebSUPPORT
	http://www.oracle.com/technology/documentation/index.html \| Site Map \| Search \| PDF Files \| Contact \| Glossary

Tuxedo Documentation \| Programming BEA Tuxedo ATMI Applications Using C \| Local Topics \| Previous Topic \| Next Topic \| Contents

The application administrator initially defines the configuration settings for an application in the UBBCONFIG configuration file. To customize your programming environment, you may need to create or update a configuration file.

If you need to create or update a configuration file, refer to the following guidelines:

Copy and edit a file that already exists. For example, the file ubbshm that comes with the bankapp sample application can provide a good starting point.
Minimize complexity. For test purposes, set up your application as a shared memory, single-processor system. Use regular operating system files for your data.
Make sure the IPCKEY parameter in the configuration file does not conflict with any other parameters being used at your installation. Check with your BEA Tuxedo application administrator, and refer to Setting Up a BEA Tuxedo Application for more information.
Set the UID and GID parameters so that you are the owner of the configuration.
Review the documentation. The configuration file is described in UBBCONFIG(5) in the File Formats, Data Descriptions, MIBs, and System Processes Reference.

The following table summarizes the UBBCONFIG configuration file parameters that affect the programming environment. Parameters are listed by functional category.

Programming-related UBBCONFIG Parameters by Functional Category

Functional Category

Parameter

Section

Description

Global resource limits

MAXSERVERS

RESOURCES

Specifies the maximum number of servers in the configuration. When setting this value, you need to consider the MAX values for all servers.

MAXSERVICES

RESOURCES

Specifies the maximum total number of services in the configuration.

Data-dependent routing

BUFTYPE

ROUTING

List of types and subtypes of data buffers for which the specified routing entry is valid.

Link-level encryption

MINENCRYPTBITS

NETWORK

Sets the minimum encryption level that a process accepts.

MAXENCRYPTBITS

NETWORK

Sets the maximum encryption level that a process accepts.

Load balancing

LDBAL

RESOURCES

Flag for specifying whether or not load balancing is enabled. If enabled, the BEA Tuxedo system attempts to balance requests across the network.

NETLOAD

MACHINES

Numeric value that is added to the load factor of services that are remote from the invoking client, providing a bias for choosing a local server over a remote server. Load balancing must be enabled (that is, LDBAL must be set to Y).

LOAD

SERVICES

Relative load factor associated with a service instance. The default is 50.

Security

AUTHSVC

RESOURCES

Specifies the name of an application authentication service that is invoked by the system for each client joining the system.

SECURITY

RESOURCES

Specifies the type of application security to be enforced.

Conversational communication

MAXCONV

RESOURCES

Sets the maximum number of simultaneous conversations for a single machine. You can specify a value between 0 and 32,767. The default is 64 if any conversational servers are defined in the SERVERS section; otherwise, the default is 1. The specified value can be overriden for each machine in the MACHINES section.

CONV

SERVERS

Specifies whether or not conversational communication is supported. If this parameter is set to N or unspecified, a tpconnect() call to a service fails.

MIN/MAX

SERVERS

Specifies the minimum and maximum number of occurrences of the server to be started by tmboot(1). If not specified, MIN defaults to 1 and MAX defaults to MIN. The same parameters are available for use with request/response servers. However, conversational servers are automatically spawned as needed. So if you set MIN=1 and MAX=10, for example, tmboot starts one server initially. When a tpconnect() call is made to a service offered by that server, the system starts a second copy of a server. As each copy is called, a new one is spawned, up to a limit of 10.

Transaction management

AUTOTRAN

SERVICES

Controls whether a service routine is placed in transaction mode. If you set this parameter to Y, a transaction in the service subroutine is automatically started whenever a request message is received from another process.

Multithreaded servers

MAXDISPATCHTHREADS

SERVERS

Specifies the maximum number of concurrently dispatched threads that each server process may spawn.

MINDISPATCHTHREADS

SERVERS

Specifies the number of server dispatch threads started on initial server boot.

Functional Category	Parameter	Section	Description
Global resource limits	MAXSERVERS	RESOURCES	Specifies the maximum number of servers in the configuration. When setting this value, you need to consider the MAX values for all servers.
MAXSERVICES	RESOURCES	Specifies the maximum total number of services in the configuration.
Data-dependent routing	BUFTYPE	ROUTING	List of types and subtypes of data buffers for which the specified routing entry is valid.
Link-level encryption	MINENCRYPTBITS	NETWORK	Sets the minimum encryption level that a process accepts.
MAXENCRYPTBITS	NETWORK	Sets the maximum encryption level that a process accepts.
Load balancing	LDBAL	RESOURCES	Flag for specifying whether or not load balancing is enabled. If enabled, the BEA Tuxedo system attempts to balance requests across the network.
NETLOAD	MACHINES	Numeric value that is added to the load factor of services that are remote from the invoking client, providing a bias for choosing a local server over a remote server. Load balancing must be enabled (that is, LDBAL must be set to Y).
LOAD	SERVICES	Relative load factor associated with a service instance. The default is 50.
Security	AUTHSVC	RESOURCES	Specifies the name of an application authentication service that is invoked by the system for each client joining the system.
SECURITY	RESOURCES	Specifies the type of application security to be enforced.
Conversational communication	MAXCONV	RESOURCES	Sets the maximum number of simultaneous conversations for a single machine. You can specify a value between 0 and 32,767. The default is 64 if any conversational servers are defined in the SERVERS section; otherwise, the default is 1. The specified value can be overriden for each machine in the MACHINES section.
CONV	SERVERS	Specifies whether or not conversational communication is supported. If this parameter is set to N or unspecified, a tpconnect() call to a service fails.
MIN/MAX	SERVERS	Specifies the minimum and maximum number of occurrences of the server to be started by tmboot(1). If not specified, MIN defaults to 1 and MAX defaults to MIN. The same parameters are available for use with request/response servers. However, conversational servers are automatically spawned as needed. So if you set MIN=1 and MAX=10, for example, tmboot starts one server initially. When a tpconnect() call is made to a service offered by that server, the system starts a second copy of a server. As each copy is called, a new one is spawned, up to a limit of 10.
Transaction management	AUTOTRAN	SERVICES	Controls whether a service routine is placed in transaction mode. If you set this parameter to Y, a transaction in the service subroutine is automatically started whenever a request message is received from another process.
Multithreaded servers	MAXDISPATCHTHREADS	SERVERS	Specifies the maximum number of concurrently dispatched threads that each server process may spawn.
MINDISPATCHTHREADS	SERVERS	Specifies the number of server dispatch threads started on initial server boot.

The configuration file is an operating system text file. To make it usable by the system, you must execute the tmloadcf(1) command to convert the file to a binary file.