Configuring the Tuxedo MQ Adapter

The Tuxedo MQ Adapter consists of three Tuxedo servers: a Tuxedo to WebSphere MQ server (TM_MQO), a WebSphere MQ to Tuxedo server (TM_MQI), and a server for handling tpenqueue() and tpdequeue() requests (TMQUEUE_MQM). You must identify each of the servers that you intend to use in the TUXEDO UBBCONFIG file. In addition, the MQ Adapter requires that certain parameters be set for each server. You define these parameters in a server configuration file. A sample configuration file for each server is shown in this document. You can use these sample configuration files as a base and insert the specific information required for your environment.

The following sections describe how to identify each of the servers in the TUXEDO UBBCONFIG file, and how to set up the configuration file required by the MQ Adapter for each of these servers.

Configuring the Tuxedo to WebSphere MQ Server (TM_MQO)

TM_MQO routes all requests for WebSphere MQ services from TUXEDO clients. It interacts with WebSphere MQ via the Message Queue Interface (MQI) by enqueuing and dequeuing service requests and responses. The MQI is a common application programming interface that all WebSphere MQ applications implement.

You define the TM_MQO server in the SERVERS section of the TUXEDO UBBCONFIG file as follows:

CLOPT= "-- -C Tuxedo to WebSphere MQ configfile" specifies the server's configuration file.

A configuration file provides a list of services and their associated parameters to the server at startup. See Creating the Server Configuration Files for an explanation of the parameters you need to define.

Defining FML32 Fields for the Tuxedo to WebSphere MQ Server

Tuxedo has defined FML32 fields for TM_MQO in the $TUXDIR/udataobj/Usysfl32 field definition table and in the $TUXDIR/include/Usysfl32.h header file. The Tuxedo MQ Adapter uses FML32 functions to manipulate fielded buffers related to errors. For more information about FML32 programming, see the Programming a BEA Tuxedo ATMI Application Using FML.

# name                  number    type    flags   comments
TPMQ_ADAPTER_ERR        `n'     string      -        -
TPMQ_ADAPTER_ERR_CODE   `n'     string      -        -
TPMQ_APP_ERR            `n'     string      -        -

TPMQ_ADAPTER_ERR: stores the details of the errors specific to the Tuxedo MQ Adapter.
TPMQ_ADAPTER_ERR_CODE: stores the category code for the adapter-specific errors.
TPMQ_APP_ERR: stores the details of the errors specific to WebSphere MQ.

These fields are defined in $TUXDIR/udataobj/Usysfl32 and in $TUXDIR/include/Usysfl32.h. (If an interoperating client running Tuxedo 9.1 or earlier wants to use these fields, the client will need to define these fields using the same field numbers as in later versions of Tuxedo.).

The environment variables FLDTBLDIR32 and FIELDTBLS32 should be set so that the system will look in $TUXDIR/udataobj/Usysfl32 for FML32 field definitions.

Configuring the WebSphere MQ to Tuxedo Server (TM_MQI)

TM_MQI forwards messages requested from WebSphere MQ applications to TUXEDO services. The application queues a request to a designated queue that is monitored by TM_MQI. The requested service is specified in the message descriptor. Like TM_MQO, TM_MQI must perform data and semantic transformations on the data stored on a queue before delivering it to a service. It must do the same to replies.

You define the TM_MQI server in the SERVERS section of the TUXEDO UBBCONFIG file as follows:

*SERVERS
TM_MQI SRVGRP="

identifier

" SRVID="number" REPLYQ=N
CLOPT="--  -C configuration_file_name"

For information about the SRVGRP, SRVID, REPLYQ, and CLOPT parameter syntax and definitions, refer to the BEA TUXEDO Reference Manual.

CLOPT= "-- -C WebSphere MQ to Tuxedo configfile" specifies the server's configuration file.

A configuration file provides a list of queues and services and their associated parameters to the server at startup. See Creating the Server Configuration Files for an explanation of the parameters you need to define.

Configuring the TMQUEUE_MQM Server

TMQUEUE_MQM processes the tpenqueue() and tpdequeue() requests from TUXEDO applications that need to send or retrieve data to or from an WebSphere MQ queue.

You define the TMQUEUE_MQM server in the SERVERS section of the TUXEDO UBBCONFIG file as follows:

For information about the SRVGRP, SRVID, REPLYQ, and CLOPT parameter syntax and definitions, refer to the BEA TUXEDO Reference Manual.

CLOPT= "-- -C enqueue/dequeue configfile" specifies the server's configuration file.

A configuration file provides a list of queues and their associated parameters to the server at startup. See Creating the Server Configuration Files for an explanation of the parameters you need to define.

Creating the Server Configuration Files

You must create a configuration file for each of the three MQ Adapter servers. The documentation shows sample files you can use as a base for creating your own configuration files. You can substitute the parameter settings in the sample files with the settings required for your own environment.

Creating the Tuxedo to WebSphere MQ Server Configuration File

The TM_MQO.CFG file controls the operation of the Tuxedo to WebSphere MQ server (TM_MQO). Following are the sections of the TM_MQO configuration file and the parameters you can define for each section. A sample configuration file follows the descriptions.

Queue_Manager

Defines the queue manager name and logical ID.

Note:

The configuration file can only have one QUEUE_MANAGER section.

SERVICES

Defines various parameters for services and messages.

These sections and the parameters within each section can be in any order in the configuration file, as long as the required sections and parameters are defined.

Defining the TM_MQO QUEUE_MANAGER Section (Required)

The syntax for the QUEUE_MANAGER section of the TM_MQO configuration file is as follows:

Required Parameter

The following parameter must be included in the QUEUE_MANAGER section of the TM_MQO configuration file.

NAME= string

Optional Parameter

LQMID= string

Defining the TM_MQO SERVICE Section (Required)

The syntax for the SERVICE section of the TM_MQO configuration file is as follows:

*SERVICE
NAME=string
MQNAME=string
FORMAT=string
TRAN={Y/N}
MAXMSGLEN=integer
REPLYTOQ=string
TIMEOUT=integer
EXPIRE=integer
PRIORITY=integer
INFIELD=string
OUTFIELD=string
OUTFIELDVNAME=string

Required Parameters

The following parameters must be included in the SERVICE section of the TM_MQO configuration file.

NAME = string

Specifies the TUXEDO Service Name. The maximum length of this parameter is the same as the maximum length of a Tuxedo service name, which is currently 15 characters of mixed case. Note that the NAME string should be unique among all of the *SERVICE sections in a particular TM_MQO configuration file.

MQNAME = string

MAXMSGLEN = integer

Specifies the maximum message length expected for buffers received by this service. This is a required parameter unless DEFMAXMSGLEN is specified in the SERVER section. (See Defining the SERVER Section (Optional) for more information).

TIMEOUT = integer

Specifies the amount of time, in seconds, that is allowed for processing of the indicated MQ service. (This is the maximum amount of time that MQGET will wait for a message on the reply queue after the MQ service is invoked with MQPUT1.) The value must be greater than or equal to 0. A value of 0 indicates that the service will not be timed out. This is a required parameter unless DEFTIMEOUT is specified in the SERVER section. (See Defining the SERVER Section (Optional) for more information).

Optional Parameters

EXPIRE = integer

Specifies the amount of time, in tenths of a second, the expiry time for the MQ service request message sent with MQPUT1. The value must be greater than or equal to 0. A value of 0 indicates that the message will not be expired. The default value is 0.

PRIORITY = integer

Specifies the WebSphere MQ priority at which requests to this service will be sent. WebSphere MQ has traditionally allowed values of 0 through 9 for priorities. If not specified, the default queue priority represented in MQ by the value MQPRI_PRIORITY_AS_Q_DEF will be used.

FORMAT = string

TRAN = {Y|N}

Specifies whether the Service is transactional. Y indicates transactional; N indicates non-transactional. The default value is N. (A service defined as transactional must be called within a Tuxedo transaction. A service defined as non-transactional must be called outside of a Tuxedo transaction. Messages sent to transactional services are sent with persistence MQPER_PERSISTENT and messages sent to non-transactional services are sent with the default queue persistence MQPER_PERSISTENCE_AS_Q_DEF.)

REPLYTOQ = string

INFIELD = string

Specifies the FML32 field name of the input data in an FML32 buffer. If you specify this parameter, requests for this service may pass FML32 buffers for input, and the data in INFIELD will be passed as the actual service data. (A request to a service which specifies INFIELD may still pass a non-FML32 data type as input, which will be treated exactly as if INFIELD had not been specified, but a request to a service which specifies INFIELD may not pass NULL data.)

If INFIELD is a FLD_VIEW32 field, TM_MQO will pass only the actual VIEW32 data to MQ and will not pass the FVIEWFLD structure that was returned by FML32. The MQ program must know which view it is expecting to receive. The application should not use fields of type FLD_PTR, FLD_FML32, FLD_MBSTRING, or FLD_FML for the TM_MQO INFIELD or OUTFIELD. These field types will not result in meaningful data being passed to or from the MQ application. If INFIELD is not specified, then TM_MQO will accept only buffers not of type FML32 as input, and will pass this data directly to WebSphere MQ.

OUTFIELD = string

Specifies the FML32 field name of the output data to be used when building an FML32 response buffer. If you specify this parameter, you must also specify the INFIELD parameter. The omission of this parameter causes the response data field name to match the name specified by the INFIELD parameter.

When OUTFIELD is a FLD_VIEW32 field, the data returned by MQ should be VIEW32 data, and not a FVIEWFLD structure. In order to pass VIEW32 data back to a Tuxedo application, TM_MQO must internally fill in a FVIEWFLD structure to add the VIEW32 data to the FML32 reply buffer, and therefore TM_MQO must know the name of the view to be returned. The TM_MQO server will obtain this information in the following manner:

If the OUTFIELDVNAME parameter is set, the value of this parameter will be used as the view32 name.
Otherwise, if the INFIELD was a FLD_VIEW32 field, the same viewname used in the INFIELD will be used for the OUTFIELD.
Otherwise, TM_MQO will log an error message and call tpreturn() with TPFAIL.

The application should not use fields of type FLD_PTR, FLD_FML32, FLD_MBSTRING, or FLD_FML for the TM_MQO INFIELD or OUTFIELD. These field types will not result in meaningful data being passed to or from the MQ application.

OUTFIELDVNAME = view32name

Specifies the name of the VIEW32 subtype used for output to the FML32 OUTFIELD (or the FML32 INFIELD if OUTFIELD is not configured.) OUTFIELDVNAME is allowed only if OUTFIELD and/or INFIELD are also specified.

Defining the TM_MQO SERVER Section (Optional)

The syntax for the SERVER section of the TM_MQO configuration file is as follows:

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

The absolute maximum value for MAXMSGLEVEL is 100, however, the highest meaningful value for customer debugging is 30. All the higher values should (only) be used by Oracle Support for deeper analysis or debugging.
Parameters MINMSGLEVEL and MAXMSGLEVEL are intended only for application debugging, and setting MAXMSGLEVEL to a large value can result in excessive output to the ULOG, therefore they have to be used with caution.

Level range for customers:

[10]: The log of message flow, mainly MQPUT log, or major function entry points only.
[20]: Detailed level of tracing. The information of MQ, Service, User, CompCode, and Reason are printed.
[30]: MQGET log in TM_MQI.

DEFMAXMSGLEN = integer

DEFTIMEOUT = integer

Specifies the default amount of time, in seconds, that is allowed for processing of WebSphere MQ services. The value must be greater than or equal to 0. A value of 0 indicates that the service will not be timed out. The DEFTIMEOUT is overridden by the Service TIMEOUT parameter.

Sample TM_MQO.CFG

*SERVER
	DEFTIMEOUT=60
	DEFMAXMSGLEN=4096
	MINMSGLEVEL=10
	MAXMSGLEVEL=30

*QUEUE_MANAGER
	LQMID=QM1
	NAME=BEA.TEST.MANAGER

*SERVICE
	NAME=MQTest1
	TIMEOUT=20
	MQNAME=TEST.SAMPLE.ECHO
	REPLYTOQ=TEST.REPLY.QUEUE

*SERVICE
	NAME=MQTest2
	TIMEOUT=15
	REPLYTOQ=TEST.REPLY.QUEUE
	MQNAME=TEST.SAMPLE.TOUPPER

*SERVICE
	NAME=MQTest3
	MQNAME=TEST.NOREPLY.QUEUE
	TRAN=Y
	MAXMSGLEN=1024

Creating the WebSphere MQ to Tuxedo Server Configuration File

The TM_MQI.CFG file controls the operation of the WebSphere MQ to Tuxedo server (TM_MQI). Following are the sections of the TM_MQI configuration file and the parameters you can define for each section. A sample configuration file follows the descriptions.

Note: TM_MQI.CFG is a generic filename. You can name this file anything you choose, but the filename must match the -C configuration_file_name parameter you specify in the TUXEDO UBBCONFIG file. (See Configuring the WebSphere MQ to Tuxedo Server (TM_MQI) for instructions on configuring the TM_MQI server in the UBBCONFIG file.)

Queue_Manager

Defines the queue manager name and logical ID.

Note:

The configuration file can only have one QUEUE_MANAGER section.

QUEUE

Defines various parameters for the incoming message queue.

SERVICE

Defines various parameters for the TUXEDO service.

These sections and the parameters within each section can be in any order in the configuration file, as long as the required sections and parameters are defined.

Defining the TM_MQI QUEUE_MANAGER Section (Required)

The syntax for the QUEUE_MANAGER section of the TM_MQI configuration file is as follows:

Required Parameter

The following parameter must be included in the QUEUE_MANAGER section of the TM_MQO configuration file.

NAME = string

Specifies the name of the WebSphere MQ Queue Manager assigned to the queue to be processed by the server. Can contain up to 48 characters, all uppercase. Refer to WebSphere MQ documentation for the specific format of Queue Manager names.

Optional Parameter

LQMID = string

Defining the TM_MQI QUEUE Section (Required)

The syntax for the QUEUE section of the TM_MQI configuration file is as follows:

Required Parameters

The following parameter must be included in the QUEUE section of the TM_MQI configuration file:

MQNAME = string

Specifies the name of a WebSphere MQ queue to be processed by the server. Can contain up to 48 characters, all uppercase. Refer to WebSphere MQ documentation for specific format of queue names. Note that the MQNAME string should be unique among all of the *QUEUE sections in a particular TM_MQI configuration file.

Optional Parameters

MAXMSGLEN = integer

Specifies the maximum message length expected for MQ queue buffers received by this server. Any message longer than this length read from the WebSphere MQ queue will be sent to the dead letter queue. If this parameter is not set, the value of the SERVER section DEFMAXMSGLEN parameter will be used. If the SERVER section DEFMAXMSGLEN parameter is also not set, the MaxMsgLength value defined for the WebSphere MQ queue will be used.

SERVICE = string

Specifies the name of the Tuxedo service that will process requests received on this queue. If not specified, the value of the Format field in the MQMD structure received from WebSphere MQ will be used as the Tuxedo service name. In either case, the service name must be defined in the TM_MQI SERVICE section in order for the Tuxedo service to be invoked.

Defining the TM_MQI SERVICE Section (Required)

The syntax for the SERVICE section of the TM_MQI configuration file is as follows:

Required Parameters

The following parameters must be included in the SERVICE section of the TM_MQI configuration file.

NAME = string

FORMAT = string

Maps the WebSphere MQ Message Descriptor Format field to the service being called. Can contain up to 8 characters. Refer to WebSphere MQ documentation for specific format of the Message Descriptor Format field. Note that the FORMAT string should be unique among all of the *SERVICE sections in a particular TM_MQI configuration file. If the same FORMAT is used for two or more Tuxedo services, it is undefined which service the MQ adapter will map that particular FORMAT to.

Optional Parameter

TRAN = {Y|N}

Specifies whether the Service is transactional. Y indicates transactional; N indicates non-transactional. Default value is N. (TM_MQI starts a Tuxedo transaction before reading each message from a WebSphere MQ queue. If TRAN=Y, the call to the Tuxedo service is made within this transaction. If TRAN=N, then the call to the Tuxedo service is made with the TPNOTRAN flag.)

Defining the TM_MQI SERVER Section (Optional)

The syntax for the SERVER section of the TM_MQI configuration file is as follows:

*SERVER
MINMSGLEVEL=integer
MAXMSGLEVEL=integer
DEFMAXMSGLEN=integer
TPESVCFAILDATA={Y|N}
POLINTERVAL=integer

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

The absolute maximum value for MAXMSGLEVEL is 100, however, the highest meaningful value for customer debugging is 30. All the higher values should (only) be used by Oracle Support for deeper analysis or debugging.
Parameters MINMSGLEVEL and MAXMSGLEVEL are intended only for application debugging, and setting MAXMSGLEVEL to a large value can result in excessive output to the ULOG, therefore they have to be used with caution.

Level range for customers:

[10]: The log of message flow, mainly MQPUT log, or major function entry points only.
[20]: Detailed level of tracing. The information of MQ, Service, User, CompCode, and Reason are printed.
[30]: MQGET log in TM_MQI.

DEFMAXMSGLEN = integer

TPESVCFAILDATA = {Y|N}

If TPESVCFAILDATA=N, then any error occurring on tpcall() will cause TM_MQI to send the original data sent to tpcall to the MQ dead letter queue, if any. If TPESVCFAILDATA=Y, then TM_MQI will return data to the caller's reply queue and will not send the original message to the MQ dead letter queue if tpcall() fails with TPESVCFAIL and a non-zero length reply. TM_MQI will set Feedback in MQMD to MQFB_APPL_FIRST+TPESVCFAIL in this case. If a Tuxedo service call fails with zero-length data or with any value of tperrno other than TPESVCFAIL, the original message will be sent to the Dead Letter Queue.

POLINTERVAL = integer

If not specified, the default value is 500. The recommended range is 50 to 500. Setting this one to lower value (0 to 49) may imply a high server load and to a higher value (501 and up) may lead to performance application decrease as the MQ Series incoming request queue will be check out less often and thus introduce delay to process the MQ Series request.

Sample TM_MQI.CFG

*SERVER
	MINMSGLEVEL=1
	MAXMSGLEVEL=100

*QUEUE_MANAGER
	LQMID=QM1
	NAME=BEA.TEST.MANAGER

*SERVICE
	NAME=SvcToupper
	FORMAT=UPPER

*SERVICE
	NAME=SvcEcho
	FORMAT=ECHO
	TRAN=Y

*QUEUE
	MQNAME=TEST.SAMPLE.QUEUE1
	MAXMSGLEN=200
*QUEUE
	MQNAME=TEST.SAMPLE.QUEUE2

Creating the enqueue/dequeue Server Configuration File

The TMQUEUE_MQM.CFG file controls the operation of the server that handles tpenqueue and tpdequeue requests (TMQUEUE_MQM). Following are the sections of the TMQUEUE_MQM configuration file and the parameters you can define for each section. A sample configuration file follows the descriptions.

The TMQUEUE_MQM configuration file is divided into the following required sections:

Queue_Manager

Defines the queue manager name and logical ID.

Note:

The configuration file can only have one QUEUE_MANAGER section.

QUEUE

Defines various parameters for the message queue.

SERVER

Defines the minimum and maximum debug level and the default maximum message length.

Note:

The configuration file can only have one SERVER section.

These sections and the parameters within each section can be in any order in the configuration file, as long as the required sections and parameters are defined.

Defining the TMQUEUE_MQM QUEUE_MANAGER Section (Required)

The syntax for the QUEUE_MANAGER section of the TMQUEUE_MQM configuration file is as follows:

Required Parameter

The following parameter must be included in the QUEUE_MANAGER section of the TMQUEUE_MQM configuration file:

NAME = string

Optional Parameter

LQMID = string

Defining the TMQUEUE_MQM QUEUE Section (Required)

Listing 3-15 shows the syntax for the QUEUE section of the TMQUEUE_MQM configuration file.

Required Parameters

The following parameters must be included in the QUEUE section of the TMQUEUE_MQM configuration file.

MQNAME = string

TUXNAME = string

Specifies the name of the queue used for ATMI enqueue/dequeue calls. The maximum length of this parameter is the same as the maximum length of a Tuxedo queue name, which is currently 15 characters of mixed case. Note that the TUXNAME string should be unique among all of the *QUEUE sections in a particular TMQUEUE_MQM configuration file.

MAXMSGLEN = integer

Specifies the maximum message length expected for buffers received from this queue. This parameter overrides the SERVER DEFMAXMSGLEN parameter. If DEFMAXMSGLEN is not specified, then MAXMSGLEN is required.

Defining the TMQUEUE_MQM SERVER Section (Optional)

Listing 3-16 shows the syntax for the SERVER section of the TMQUEUE_MQM configuration file.

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

The absolute maximum value for MAXMSGLEVEL is 100, however, the highest meaningful value for customer debugging is 30. All the higher values should (only) be used by Oracle Support for deeper analysis or debugging.
Parameters MINMSGLEVEL and MAXMSGLEVEL are intended only for application debugging, and setting MAXMSGLEVEL to a large value can result in excessive output to the ULOG, therefore they have to be used with caution.

Level range for customers:

[10]: The log of message flow, mainly MQPUT log, or major function entry points only.
[20]: Detailed level of tracing. The information of MQ, Service, User, CompCode, and Reason are printed.
[30]: MQGET log in TM_MQI.

DEFMAXMSGLEN = integer

Sample TMQUEUE_MQM.CFG


*QUEUE
	TUXNAME=MQTest1
	MQNAME=TEST.NOREPLY.QUEUE

*QUEUE
	TUXNAME=MQEcho
	MQNAME=TEST.SAMPLE.ECHO
	MAXMSGLEN=2048

*QUEUE
	TUXNAME=MQReply
	MQNAME=TEST.REPLY.QUEUE

Configuring the WebSphere MQ Queue Manager

You must configure the WebSphere MQ queue manager in order to run the MQ Adapter for Tuxedo. Refer to your WebSphere MQ documentation for specific instructions on configuring queue managers.

MQ Adapter

Configuring the Tuxedo MQ Adapter

Configuring the Tuxedo Servers

Configuring the Tuxedo to WebSphere MQ Server (TM_MQO)

Defining FML32 Fields for the Tuxedo to WebSphere MQ Server

Configuring the WebSphere MQ to Tuxedo Server (TM_MQI)

Configuring the TMQUEUE_MQM Server

Creating the Server Configuration Files

Creating the Tuxedo to WebSphere MQ Server Configuration File

Defining the TM_MQO QUEUE_MANAGER Section (Required)

Required Parameter

NAME= string

Optional Parameter

LQMID= string

Defining the TM_MQO SERVICE Section (Required)

Required Parameters

NAME = string

MQNAME = string

MAXMSGLEN = integer

TIMEOUT = integer

Optional Parameters

EXPIRE = integer

PRIORITY = integer

FORMAT = string

TRAN = {Y|N}

REPLYTOQ = string

INFIELD = string

OUTFIELD = string

OUTFIELDVNAME = view32name

Defining the TM_MQO SERVER Section (Optional)

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

DEFMAXMSGLEN = integer

DEFTIMEOUT = integer

Sample TM_MQO.CFG

Creating the WebSphere MQ to Tuxedo Server Configuration File

Defining the TM_MQI QUEUE_MANAGER Section (Required)

Required Parameter

NAME = string

Optional Parameter

LQMID = string

Defining the TM_MQI QUEUE Section (Required)

Required Parameters

MQNAME = string

Optional Parameters

MAXMSGLEN = integer

SERVICE = string

Defining the TM_MQI SERVICE Section (Required)

Required Parameters

NAME = string

FORMAT = string

Optional Parameter

TRAN = {Y|N}

Defining the TM_MQI SERVER Section (Optional)

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

DEFMAXMSGLEN = integer

TPESVCFAILDATA = {Y|N}

POLINTERVAL = integer

Sample TM_MQI.CFG

Creating the enqueue/dequeue Server Configuration File

Defining the TMQUEUE_MQM QUEUE_MANAGER Section (Required)

Required Parameter

NAME = string

Optional Parameter

LQMID = string

Defining the TMQUEUE_MQM QUEUE Section (Required)

Required Parameters

MQNAME = string

TUXNAME = string

MAXMSGLEN = integer

Defining the TMQUEUE_MQM SERVER Section (Optional)

Required Parameters

Optional Parameters

MINMSGLEVEL = integer

MAXMSGLEVEL = integer

`NAME= string`

`LQMID= string`

`NAME = string`

`MQNAME = string`

`MAXMSGLEN = integer`

`TIMEOUT = integer`

`EXPIRE = integer`

`PRIORITY = integer`

`FORMAT = string`

`TRAN = {Y|N}`

`REPLYTOQ = string`

`INFIELD = string`

`OUTFIELD = string`

`OUTFIELDVNAME = view32name`

`MINMSGLEVEL = integer`

`MAXMSGLEVEL = integer`

`DEFMAXMSGLEN = integer`

`DEFTIMEOUT = integer`

`NAME = string`

`LQMID = string`

`MQNAME = string`

`MAXMSGLEN = integer`

`SERVICE = string`

`NAME = string`

`FORMAT = string`

`TRAN = {Y|N}`

`MINMSGLEVEL = integer`

`MAXMSGLEVEL = integer`

`DEFMAXMSGLEN = integer`

`TPESVCFAILDATA = {Y|N}`

`POLINTERVAL = integer`

`NAME = string`

`LQMID = string`

`MQNAME = string`

`TUXNAME = string`

`MAXMSGLEN = integer`

`MINMSGLEVEL = integer`

`MAXMSGLEVEL = integer`

`DEFMAXMSGLEN = integer`