|
|
|
|
An attempt to allocate memory failed.
|
|
|
|
|
Cannot load shared module <text>: <text>
|
|
|
An attempt to load the listed shared library failed. The reason is noted in the error text.
|
|
|
Verify that the shared library exists.
|
|
Cannot get symbol '<text>' in module '<text>'
|
|
|
The listed symbol was not found in the listed shared module.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
No encoding type defined for <text>. No encoding done
|
|
|
The gateway configuration file does not specify a TYPE parameter for the listed FOREIGN gateway or a DFLTTYPE parameter in the GLOBAL section.
|
|
|
Correct the gateway configuration file.
|
|
Encoding type '<text>:<text>' for type '<text>' failed.
|
|
|
Allocating a typed buffer for encoding output failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Decode failed due to allocation error
|
|
|
The output data buffer was not created correctly with tpalloc ( ).
|
|
|
Contact your Tuxedo System Technical Support.
|
|
No encoding type defined for <text>. No decoding done
|
|
|
The Domain Gateway library software does not have an encoding type defined in shared memory for the listed gateway.
|
|
|
Verify the TYPE parameter for the gateway in the gateway configuration file.
|
|
Decoding type <text>:<text> for type <text> failed
|
|
|
The Domain Gateway library software detected an error while getting decoding information for the listed type, subtype, and remote type.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
GWICONFIG env var not found!
|
|
|
Retrieving the environment variable GWICONFIG failed.
|
|
|
Set and export the GWICONFIG environment variable.
|
|
<text> config file not found!
|
|
|
The named configuration file cannot be found.
|
|
|
Verify that the file which the GWICONFIG environment variable points to exists.
|
|
Parse of <text> failed, exiting
|
|
|
An attempt to parse the gateway configuration file failed.
|
|
|
Verify the format of the gateway configuration file.
|
|
<number> errors found while parsing <text>, exiting
|
|
|
Errors occurred while parsing the gateway configuration file.
|
|
|
Verify the format of the gateway configuration file
|
|
Dumping configuration to stdout
|
|
|
The current configuration is dumped to the standard output.
|
|
|
|
|
Sending error to <text>:\n\t<text>
|
|
|
The error condition described is being sent to the listed gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Invalid action detected <number>
|
|
|
The Domain Gateway library software detected an invalid action while trying to encode a buffer.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
|
|
The Domain Gateway library software detected an error encoding data.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
Invalid wrap switch index
|
|
|
The wrap switch index in shared memory is not valid.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
|
|
|
The buffer wrapping function returned an error.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
|
|
|
The wrapping protocol in shared memory is not GWI_PROTOCOL .
|
|
|
Contact your Tuxedo System Technical Support.
|
|
|
|
|
The buffer unwrapping function returned an error.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to obtain local service (<text>) information from shared memory
|
|
|
Information about the local service could not be found in shared memory.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Request for unknown service '<text>' from <text>
|
|
|
Information about the listed service could not be found in shared memory.
|
|
|
Verify the DMCONFIG file and ensure dmloadcf has been run on it.
|
|
Reply received for invalid session
|
|
|
The Domain Gateway received a reply for an invalid session.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Reply received for inactive session
|
|
|
The Domain Gateway received a reply for an inactive session.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to obtain remote service (<text>) information from shared memory
|
|
|
Information about the remote service could not be found in shared memory.
|
|
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
|
|
The Domain Gateway library software detected an error while decoding a received message buffer.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
|
|
The field name and its value in a fielded buffer are logged.
|
|
|
|
|
|
|
|
The field type and its value in a fielded buffer are logged.
|
|
|
|
|
Cannot open <text>:<text>
|
|
|
Could not find the listed view file.
|
|
|
Verify the VIEWDIR and VIEWFILES environment variables.
|
|
FML incompatible field in <text>:<text>
|
|
|
The listed view contains the packed decimal data type. Views containing this type cannot be used for FML-to-view or view-to-view conversions.
|
|
|
Remove packed decimal fields from the input FML or view, or send the same view structure to the local gateway that is sent to the remote gateway.
|
|
tpalloc for <text> failed
|
|
|
Allocation of an Tuxedo typed buffer failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Fvstof failed for <text>:<text>
|
|
|
The conversion of a C structure to a fielded buffer failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
<text>, licensed to <text>
|
|
|
Informational message describing license information.
|
|
|
|
|
tpalloc for <text>:<text> failed
|
|
|
Allocating a typed buffer for the listed view failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to obtain network descriptor; error code = <number>
|
|
|
This is an internal error code, indicating a network initialization failure.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to determine RDOM for request
|
|
|
This is an internal error code, indicating a shared memory lookup failure.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to connect to <text>; return code <number>
|
|
|
The gateway detected an error while trying to open a connection on a socket.
|
|
|
Verify that the network address information for the desired FOREIGN entry is correct.
|
|
Connection failed to <text>
|
|
|
The Domain Gateway library software detected an error while trying to connect to the listed gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to send service request
|
|
|
The Domain Gateway library software detected an error while trying to send a message to the network.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
Unable to send service request \"<text>\"
|
|
|
The Domain Gateway library software detected an error while trying to send a message to the network.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
Unable to get remote service information from shared memory
|
|
|
Information about the remote service could not be found in shared memory.
|
|
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
Can't get remote service name for <text>
|
|
|
The remote service name for the listed service could not be found in shared memory.
|
|
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
No remote service entry for <text>
|
|
|
No remote service entry for the listed service was found in shared memory.
|
|
|
Correct the gateway configuration file.
|
|
|
|
|
The Domain Gateway library software was unable to suspend the action while trying to set up a network connection.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
CICS init string failed for <text>.
|
|
|
The Domain Gateway library software detected an error while trying to send a CICS initialization string to the listed gateway.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
Connection <number> initialized to <text>, ID:\n\t<text>
|
|
|
The Domain Gateway library software successfully initialized a connection to the gateway.
|
|
|
|
|
Multiplex count for connection <number> is <number>
|
|
|
The multiplex count for the listed connection is given.
|
|
|
|
|
Listen port <number> (<text>) established
|
|
|
The listen port for the gateway has been established.
|
|
|
|
|
Cannot change action into msg_failure
|
|
|
The action cannot be changed to msg_failure .
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Cannot change action into msg_reply
|
|
|
The action cannot be changed to msg_failure .
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unexpected action state <number>
|
|
|
This message should never occur. The program code or defines are wrong if it does.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Conversation not found - closing connection
|
|
|
The ID of the connection was not found in the shared memory conversation table.
|
|
|
|
|
|
|
|
Trying to create an action to time out a conversation failed.
|
|
|
|
|
Cannot allocate appropriate array for poll
|
|
|
The Domain Gateway library software was unable to allocate the pollfd array.
|
|
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
Run-time environment setting failure
|
|
|
The Domain Gateway library software was unable to initialize the run-time environment.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
No free listen structures available
|
|
|
Obtaining a free listen structure failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Cannot listen for host <text>
|
|
|
The Domain Gateway library software was unable to resolve the IP address of the listed gateway.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
Gateway fails to complete connection
|
|
|
The Domain Gateway library software was unable to open a socket connection.
|
|
|
Verify that the address of the remote host is configured correctly.
|
|
Unable to establish listen port <number> (<text>)
|
|
|
The Domain Gateway library software was unable to establish a listen socket.
|
|
|
Verify that the configured listen port is not in use by another process. Contact your Tuxedo System Technical Support.
|
|
Can't read CODEPAGE '<text>' for <text> DOMAIN <text>
|
|
|
The codepage file specified in the DMCONFIG file cannot be opened.
|
|
|
Verify that the specified file is available and that the file protections are set correctly.
|
|
<text> '<text>' not found in domain configuration
|
|
|
A FOREIGN or NATIVE entry does not have a corresponding entry in the domain configuration ( dmconfig ) file.
|
|
|
Verify that each FOREIGN and NATIVE entry in the gwiconfig file has a corresponding entry in the dmconfig file.
|
|
Unlicensed Tuxedo System Binary
|
|
|
The files in your Tuxedo System installation do not contain the expected software license information for TMA TCP.
|
|
|
Reinstall the TMA TCP System software, using the license token and serial number supplied with the distribution media. Make sure not to terminate the installation program prematurely, because the license information is processed at the end.
|
|
|
|
|
Creating a conversation switch in shared memory failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
|
|
|
Creating a wrap switch in shared memory failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Couldn't load configuration
|
|
|
The Domain Gateway library software was unable to load the configuration.
|
|
|
Verify the format of the gateway configuration file.
|
|
No gateway defined in config file
|
|
|
The gateway configuration file does not contain a gateway definition.
|
|
|
Correct the gateway configuration file.
|
|
Couldn't find <text> gateway (GWINAME) in NATIVE section
|
|
|
The listed gateway was not found in the NATIVE section of the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
Couldn't find env var GWINAME. Cannot guess which gateway.
|
|
|
The gateway configuration file contains more than one gateway entry and the environment variable GWINAME is not set.
|
|
|
Set the GWINAME environment variable.
|
|
Couldn't find host name. Cannot guess gateway address.
|
|
|
The Domain Gateway library software detected an error while trying to get the name of the current host.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Service <text> is SECURE, Tuxedo security disabled
|
|
|
The listed service requires security, but Tuxedo security is disabled.
|
|
|
Either turn on Tuxedo security with the SECURITY resource, or remove the SECURE parameter from the gateway configuration file for this service.
|
|
Network initialization fails; error code = <number>
|
|
|
Initialization of the network protocol has failed.
|
|
|
Verify that the underlying TCP product is installed and configured correctly.
|
|
Universal callback setup fails; error code = <number>
|
|
|
This is an internal error code, indicating a library setup failure.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to register protocol; error code = <number>
|
|
|
This is an internal error code, indicating a library setup failure.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to set network device; error code = <number>
|
|
|
The configured network device cannot be found.
|
|
|
Verify that the NWDEVICE field in the LOCAL section of the GWICONFIG file is correct (usually /dev/tcp).
|
|
|
|
|
Could not convert the remote internet address to a binary address.
|
|
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
Accepted new connection <number> from <text>
|
|
|
A new connection from the remote gateway has been accepted.
|
|
|
|
|
Poll returned error (num_cnx=<number>)
|
|
|
The Domain Gateway library software detected an error while polling the connection for events.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
No free sessions available
|
|
|
The Domain Gateway library software was unable to allocate shared memory for a new session structure.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to get new action: gpnd <number>
|
|
|
This is an internal error, indicating that the Domain Gateway is unable to allocate a new action.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Invalid ses_idx <number> for act <number>
|
|
|
The action structure references an invalid session index.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unable to allocate a receive buffer
|
|
|
The Domain Gateway is unable to allocate memory for a receive buffer.
|
|
|
Verify that system memory requirements are met. If problems persist, contact your Tuxedo System Technical Support.
|
|
Deleting late reply from local service '<text>'
|
|
|
A late reply has arrived from a Tuxedo service. Because the request has already timed out, the reply is discarded.
|
|
|
No action is required. If an excessive number of timeouts occur, adjustments may be needed in the configuration.
|
|
Error message from <text>:\n\tTuxedo code <number> (<text>):\n\t<text>
|
|
|
Received an error message from the remote gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Late response received for freed session <number>/<number>
|
|
|
Received a response on a file descriptor which had timed out.
|
|
|
|
|
|
|
|
Received a message on a session with no associated action.
|
|
|
|
|
Data conversion failed for local request '<text>'
|
|
|
The Domain Gateway library software detected an error while trying to decode a message.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unexpected diagnostic <number> returned from server
|
|
|
An unexpected diagnostic flag was returned from the server.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Data conversion failed for local service '<text>'
|
|
|
The Domain Gateway library software detected an error while trying to encode a message.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Connection <number> initialized from <text>
|
|
|
The Domain Gateway library software received a connection request from the remote gateway.
|
|
|
|
|
Unable to identify local service, rname '<text>'
|
|
|
The service requested by the listed remote service was not found in shared memory.
|
|
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
Unable to map local service RNAME <text>
|
|
|
The service requested by the listed service name was not found in shared memory.
|
|
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
Unable to identify user <text>
|
|
|
The listed user is not authorized for the requested service.
|
|
|
Verify the tpusr file in APPDIR .
|
|
Protocol error: server cannot use GWI_OP_DISCON
|
|
|
A remote service is sending a disconnect.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Invalid opcode on receive
|
|
|
The Domain Gateway library software received an invalid opcode.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Closing connection <number>
|
|
|
The listed connection is being closed.
|
|
|
|
|
gwi_mk_error called with bad act_idx!
|
|
|
The Domain Gateway library software detected that an error occurred between a send and receive. The connection closes.
|
|
|
|
|
Too many unrecoverable errors occurred - deleting action
|
|
|
The Domain Gateway library software detected more than 2 errors while trying to complete the action.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unrecoverable error occurred on send of reply request - deleting action
|
|
|
Cannot send a reply to a call made with TPNOREPLY .
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Local request '<text>' timed out, returning error response
|
|
|
The request for the local service timed out.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Deleting timed out session index %d for connection %d
|
|
|
The request for the local service timed out.
|
|
|
|
|
Local request '<text>' failed, returning error response
|
|
|
The request for the local service failed.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Error on receive from <text>
|
|
|
The Domain Gateway library software detected an error when receiving a request from a remote gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Unrecoverable error occurred on unknown receipt(2) - deleting action
|
|
|
The current action has no associated session.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
No FOREIGN entry for REMOTE_DOMAIN '<text>'
|
|
|
There is no FOREIGN entry in the GWICONFIG file corresponding to the specified REMOTE_DOMAIN .
|
|
|
Create a FOREIGN entry in the GWICONFIG file for each REMOTE_DOMAIN that is available through the gateway.
|
|
Unrecoverable error occurred - deleting GWEV_MSG_FAILURE action (type <number>)
|
|
|
The Domain Gateway library software detected an unrecoverable error.
|
|
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
Unrecoverable error occurred - changing action (type <number>) into GWEV_MSG_FAILURE
|
|
|
The Domain Gateway library software detected an unrecoverable error.
|
|
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
Unrecoverable error occurred - deleting action (type <number>)
|
|
|
The Domain Gateway library software detected an unrecoverable error.
|
|
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
|
|
|
The action with the given request ID was not found in shared memory.
|
|
|
|
|
|
|
|
The session with the given conversation ID was not found in shared memory.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Invalid network address <<text>>
|
|
|
The given network address is not valid.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Invalid host name <<text>>
|
|
|
Could not get the network address for the listed host.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Bad ip adress format <<text>>
|
|
|
The format of the listed ip address is invalid.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Input string too long <<text>>
|
|
|
The address is too long to fit in the memory allocated for it.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Timeout on remote service <text> on <text>
|
|
|
The Domain Gateway library software detected a timeout on the listed remote service.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Timeout on local service <text>, returning error to <text>
|
|
|
The Domain Gateway library software detected a timeout on the listed local service.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Connect time-out on connection <number> to <text>
|
|
|
The Domain Gateway library software detected a timeout while attempting to connect to the remote gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Idle time-out on connection <number> to <text>
|
|
|
The Domain Gateway library software detected a timeout on the listed connection to the remote gateway.
|
|
|
Contact your Tuxedo System Technical Support.
|
|
Parse error: <text> line <number> column <number> (after <<text>>) at <<text>>
|
|
|
The Domain Gateway library software encountered an error while parsing the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
|
|
|
There was no NWDEVICE specified in the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
NATIVE name <text> already in use
|
|
|
The listed gateway name is specified more than once in the NATIVE section of the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
Unreasonable POLL_TIME <number> ignored for NATIVE <text>
|
|
|
The gateway configuration file specifies a poll time which is less than 100,000 or greater than 10,000,000.
|
|
|
No action required. The poll time is set to 250,000.
|
|
REMOTE_SERVICE <text> has no OUTREQ_TIME, no default in GLOBAL
|
|
|
The gateway configuration file does not have an OUTREQ_TIME specified for a remote service.
|
|
|
Correct the gateway configuration file.
|
|
FOREIGN name <text> already in use
|
|
|
The listed gateway name is specified more than once in the FOREIGN section of the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
Missing mandatory TYPE param for FOREIGN <text>
|
|
|
The gateway configuration file does not have a TYPE parameter for the listed gateway.
|
|
|
Correct the gateway configuration file.
|
|
Missing mandatory WRAP param for FOREIGN <text>
|
|
|
The gateway configuration file does not have a WRAP parameter for the listed gateway.
|
|
|
Correct the gateway configuration file.
|
|
Missing mandatory IP_ADDR param for FOREIGN <text>
|
|
|
The gateway configuration file does not have an IP_ADDR parameter for the listed gateway.
|
|
|
Correct the gateway configuration file.
|
|
LOCAL_SERVICE name <text> already in use
|
|
|
The listed service name is specified more than once in the LOCAL_SERVICE section of the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
REMOTE_SERVICE name <text> already in use
|
|
|
The listed service name is specified more than once in the REMOTE_SERVICE section of the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
Mandatory <text> section missing
|
|
|
The gateway configuration file must contain the GLOBAL , FOREIGN , NATIVE , LOCAL_SERVICES , and REMOTE_SERVICES sections.
|
|
|
Correct the gateway configuration file.
|
|
|
|
|
The gateway configuration file contains multiple entries for the listed section.
|
|
|
Correct the gateway configuration file.
|
|
Section <text> out of order
|
|
|
The listed section is not in the proper order in the gateway configuration file.
|
|
|
Correct the gateway configuration file.
|
|
Section order must be *GLOBAL then *NATIVE/*FOREIGN then *LOCAL_SERVICES/*REMOTE_SERVICES
|
|
|
The gateway configuration file must have the following order of sections: GLOBAL , NATIVE/FOREIGN , LOCAL_SERVICES/REMOTE_SERVICES .
|
|
|
|
|
Bad subtype <text> truncated to <number> characters
|
|
|
The gateway configuration file specifies a subtype name which is too long.
|
|
|
Correct the gateway configuration file.
|
|
Bad type <text> truncated to <number> characters
|
|
|
The gateway configuration file specifies a type name which is too long.
|
|
|
Correct the gateway configuration file.
|
|
SECURE= accepts Y or N, not <text>
|
|
|
The gateway configuration file contains an invalid entry for the SECURE parameter.
|
|
|
Correct the gateway configuration file.
|
|
DSECURITY= accepts Y or N, not <parameter>
|
|
|
The gateway configuration file contains an invalid entry for the DSECURITY parameter.
|
|
|
Correct the gateway configuration file.
|
|
DUMP= accepts Y or N, not <text>
|
|
|
The gateway configuration file contains an invalid entry for the DUMP parameter.
|
|
|
Correct the gateway configuration file.
|
|
CONNSYNC= accepts Y or N, not <text>
|
|
|
The gateway configuration file contains an invalid entry for the CONNSYNC parameter.
|
|
|
Correct the gateway configuration file.
|
|
CICS= accepts Y or N, not <text>
|
|
|
The gateway configuration file contains an invalid entry for the CICS parameter.
|
|
|
Correct the gateway configuration file.
|
|
Remove obsolete line in <text> : \"REPLY = <text>\"
|
|
|
The gateway configuration file contains a REPLY parameter, which is obsolete.
|
|
|
Remove the REPLY parameter from the gateway configuration file.
|
|
CONV=Y, conversational mode not supported
|
|
|
The gateway configuration file specifies CONV=Y for a local service. This is currently not supported.
|
|
|
Correct the gateway configuration file.
|
|
CONV= accepts Y or N, not <text>
|
|
|
The gateway configuration file contains an invalid entry for the CONV parameter.
|
|
|
Correct the gateway configuration file.
|
|
|
|
|
The unwrapping protocol in shared memory is not GWI_PROTOCOL .
|
|
|
Contact your Tuxedo System Technical Support.
|
|
External encode/decode enabled, type '<text>'
|
|
|
The external encoding command line option has been specified on the gateway, with the given encoding type.
|
|
|
|
|
External encode/decode service returned error:\n\tTuxedo code <number> (<text>)
|
|
|
An external encode or decode request has resulted in an error. The Tuxedo code and a descriptive message are supplied.
|
|
|
Verify that the encode/decode service is running and that the DMCONFIG and GWICONFIG files are configured properly.
|
|
TCP-IP Listener Error Received: <text>
|
|
|
An error has been reported by the TCP/IP listener on the remote system.
|
|
|
Examine the logs on the remote system to determine the cause of the TCP/IP failure.
|
|
Mainframe buffer length checking disabled
|
|
|
The gateway has been configured to allow copybook buffers from the remote host that are not as large as the desired VIEW buffer.
|
|
|
|
|
Mainframe padding disabled
|
|
|
The gateway has been configured to not align copybook members sent to and received from the remote host.
|
|
|
|
|
|
|
|
|
The gateway has been configured to log each request to standard error output.
|
|
|
|
|
CODPEPAGE `<Code page name>' for `LOCAL' DOMAIN <Domain name>
|
|
|
This displays the code page used by the Local Domain.
|
|
|
|
|
CODPEPAGE `<Code page name>' for `REMOTE' DOMAIN <Domain name>
|
|
|
This displays the code page used by the Remote Domain.
|
|
|
|