|
|
Installing BEA Tuxedo Mainframe Adapter for TCP (CICS) (hereafter referenced as TMA TCP for CICS) consists of the following basic tasks and topics.
| Note: | To upgrade from previous releases of eLink for Mainframe TCP, refer to BEA Tuxedo Mainframe Adapter for TCP Release Notes. |
Before you install TMA TCP for CICS, complete the following tasks.
Prior to beginning the installation, verify hardware and software requirements. For system requirements, refer to the BEA Tuxedo Mainframe Adapter for TCP Release Notes. Ensure that your installation workstation is connected to z/OS through TCP/IP, and is capable of running FTP.
Verify that all block sizes in the supplied JCL are appropriate for the device types being used. By default, 3380 is assumed.
Complete the following tasks to install BEA TMA TCP for CICS
Allocate a temporary data set on z/OS direct access storage device (DASD) for the installation job as shown in the following example.
| Note: | Specify either the Volume Serial parameter or the Generic Unit parameter, but not both. |
Data Set Name: YOURHLQ.TEMP.INSTALL
Volume serial:nnnnn (Blank for authorized default volume)
Generic unit: (Generic group name or unit address)
Space units: TRACK (BLKS, TRKS, CYLS, KB, MB or BYTES)
Primary quantity: 1 (In above units)
Secondary quantity:1 (In above units)
Directory blocks:0 (Zero for sequential data set)
Record format: FB
Record length: 80
Block size: 6160
Expiration date: (YY/MM/DD, YYYY/MM/DD YY.DDD,
YYYY.DDD in Julian form DDDD for
retention period in days or blank)
Enter "/" to select option
Allocate Multiple Volumes
The TMA TCP for CICS product is distributed on a single CD-ROM (with other members of the BEA TMA TCP product). The TMA TCP for CICS distribution files are grouped under one of the following directory structures:
FTP the file called INSTALL to the temporary data set created in the
Task 1: Allocate Temporary Data Sets section. Listing 3-2 is the process for downloading the INSTALL file using FTP.
% ftp zos-machine
Connected to zos-machine.
Name (zos-machine:unix-id): tso-id
331 Send password please.
Password: tso-password
230 tso-id is logged on.
Remote system type is z/OS.
ftp> quot site rec=fb
ftp> quot site lr=80
ftp> put INSTALL 'data set name allocated'
200 Port request OK.
125 Storing data set 'data set name allocated'
2749 bytes sent in 0.00 seconds (555.12 Kbytes/s)
ftp> quit
221 Quit command received. Goodbye.
Tailor the JCL as required to match your installation’s standards and naming conventions. Review the following items and make the necessary changes before you submit the job.
| Note: | This is an instream PROC; the variables are at the end of the PROC. |
JOBCARD to your standards.YOURHLQ.” If you intend to rename them, modify the variables JCL, OBJECT, and SOURCE. INSTALL JCL. This JCL creates six partitioned data sets based on the “high-level-qualifier” you have specified as the value of the JCL parameter (&HLQ) in the JCL.
The INSTALL JCL includes the name BEATCPC as part of the data set name. For example.
//JDOE1 JOB (INSTALL),'J DOE',NOTIFY=&SYSUID,
// CLASS=C,MSGCLASS=X,MSGLEVEL=(1,1),TIME=1440
//*
//INSTALL PROC HLQ=, ** YOUR HIGH LEVEL QUALIFIER
// DASD=, ** DASD DEVICE TYPE
// VOLUME=, ** SERIAL NUMBER OF TARGER VOLUME
// BLKFB=6160, ** BLKSIZE FOR FIXED BLOCK FILE
//*====================================================================
//* THESE JCL WILL CREATE THE PDS FILES REQUIRED FOR
//* THE INSTALLATION OF BEA TMA TCP FOR CICS
//*====================================================================
// PDSCNTL='CONTROL', ** 'YOURHLQ'.BEATCPC.CONTROL
// PDSINCL='INCLUDE', ** 'YOURHLQ'.BEATCPC.INCLUDE
// PDSJCL='JCL', ** 'YOURHLQ'.BEATCPC.JCL
// PDSOBJS='OBJECT', ** 'YOURHLQ'.BEATCPC.OBJECT
// PDSLKED='PLKED', ** 'YOURHLQ'.BEATCPC.PLKED
// PDSSRCE='SOURCE' ** 'YOURHLQ'.BEATCPC.SOURCE
// PDSLKED='PLKED', ** 'YOURHLQ'.BEATCPC.PLKED
// PDSSRCE='SOURCE' ** 'YOURHLQ'.BEATCPC.SOURCE
//*--------------------------------------------------------------------
//* WE RECOMMEND THAT YOU KEEP THE NODE 'BEATCPC' IN THE data set NAMES
//*--------------------------------------------------------------------
//EXEC PGM=IEFBR14
//PDSCNTL DD DSNAME=&HLQ..BEATCPC.&PDSCNTL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSJCL DD DSNAME=&HLQ..BEATCPC.&PDSJCL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSINCL DD DSNAME=&HLQ..BEATCPC.&PDSINCL.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
//PDSOBJS DD DSNAME=&HLQ..BEATCPC.&PDSOBJS.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=3200),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(3,1,5))
//*
//PDSLKED DD DSNAME=&HLQ..BEATCPC.&PDSLKED.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(3,1,5))
//*
//PDSSRCE DD DSNAME=&HLQ..BEATCPC.&PDSSRCE.,DISP=(NEW,CATLG,DELETE),
// DCB=(DSORG=PO,RECFM=FB,LRECL=80,BLKSIZE=&BLKFB),
// UNIT=&DASD,VOL=SER=&VOLUME,SPACE=(CYL,(1,1,5))
//*
// PEND
//*--------------------------------------------------------------------
//* CUSTOMIZE THE PARAMETER ACCORDING TO YOUR INSTALLATION
//*--------------------------------------------------------------------
// EXEC PROC=INSTALL,
// DASD=3390, ** YOUR DEVICE TYPE
// VOLUME=MVS201, ** YOUR VOLUME SERIAL NUMBER
// HLQ='PRODUCTS.BEA.TMA', ** YOUR HIGH LEVEL QUALIFIER
// PDSCNTL='CONTROL', ** BEATCPC CONTROL
// PDSINCL='INCLUDE', ** BEATCPC INCLUDE
// PDSJCL='JCL', ** BEATCPC JCL
// PDSOBJS='OBJECT', ** BEATCPC OBJECT
// PDSLKED='PLKED', ** BEATCPC PLKED
// PDSSRCE='SOURCE '** BEATCPC SOURCE
Upload all the files on the distribution medium to the partitioned data sets allocated by the job INSTALL in the
Task 3: Create the PDS Libraries section.
The TMA TCP for CICS distribution files are grouped under one of the following directory structures:
The previous directory structures include the following partitioned data sets.
% ftp zos-machine
Connected to zos-machine.
Name (beavs:tso-id):
331 Send password please.
Password: tso-password
230 tso-id is logged on.
Remote system type is z/OS.
ftp> prompt off
Interactive mode off
ftp> quot site rec=fb
200 SITE command was accepted
ftp> quot site lr=80
200 SITE command was accepted
| Note: | You must set ASCII mode on. |
ftp> lcd /cdrom/unixmf/cics/control
Local directory now /cdrom/unixmf/cics/control
ftp> cd 'YOURHLQ.BEATCPC.CONTROL'
250 "'YOURHLQ.BEATCPC.CONTROL'" partitioned data set is working directory
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: CSDU remote: CSDU
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.CONTROL(CSDU)
250 Transfer completed successfully.
5740 bytes sent in 0.01 seconds (747.10 Kbytes/s)
.
.
.
| Note: | You must set ASCII mode on. |
ftp> lcd /cdrom/unixmf/cics/jcl
Local directory now /cdrom/unixmf/cics/jcl
ftp> cd 'YOURHLQ.BEATCPC.JCL'
250 "'YOURHLQ.BEATCPC.JCL'" partitioned data set is working directory.
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: BLDVSAM remote: BLDVSAM
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.JCL(BLDVSAM)
250 Transfer completed successfully.
2214 bytes sent in 0.00 seconds (563.49 Kbytes/s)
.
.
.
| Note: | You must set ASCII mode on. |
ftp> lcd /cdrom/unixmf/cics/source
Local directory now /cdrom/unixmf/cics/source
ftp> cd 'YOURHLQ.BEATCPC.SOURCE'
250 "'YOURHLQ.BEATCPC.SOURCE'" partitioned data set is working directory.
ftp>ascii
200 Representation type is Ascii
ftp> mput *
local: BEACCLN1 remote: BEACCLN1
200 Port request OK.
125 Storing data set YOURLHQ.BEATCPC.SOURCE(BEACCLN1)
250 Transfer completed successfully.
10578 bytes sent in 0.01 seconds (1013.85 Kbytes/s)
.
.
.
| Note: | You must set ASCII mode on. |
ftp> ascii
ftp> lcd /cdrom/unixmf/cics/include
ftp> cd ’"YOURHLQ".BEATCPC.INCLUDE’
250 "’YOURHLQ.BEATCPC.INLUDE’" partitioned data set is working directory
ftp>ascii
200 Representation type is Ascii
ftp> mput *
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.INCLUDE’(CLIENT)
250 Transfer completed successfully.
local: CLIENT remote: CLIENT
3736 bytes sent in 0.0081 seconds (4.5e+02 Kbytes/s)
.
.
.
| Note: | You must set binary mode on. |
ftp> binary
200 Representation type is IMAGE.
ftp> lcd /cdrom/unixmf/cics/object
Local directory now /cdrom/unixmf/cics/object
ftp> cd 'YOURHLQ.BEATCPC.OBJECT'
250 "'YOURHLQ.BEATCPC.OBJECT'" partitioned data set is working directory.
ftp>binary
200 Representation type is Image
ftp> mput *
local: BEACFGSV remote: BEACFGSV
200 Port request OK.
125 Storing data set "YOURHLQ".BEATCPC.OBJECT(BEACFGSV)
250 Transfer completed successfully.
6240 bytes sent in 0.00 seconds (1466.96 Kbytes/s)
.
.
.
| Note: | You must set binary mode on. |
ftp> binary
200 Representation type is Image
ftp> lcd /cdrom/unixmf/plked
ftp> cd ’"YOURHLQ".BEATCPC.PLKED’
250 "’"YOURHLQ.BEATCPC.PLKED’" partitioned data set is working directory
ftp>binary
200 Representation type is Image
ftp> mput *
200 Port request OK.
125 Storing data set "YOURHLQ.BEATCPC.PLKED(BEACIC00)
250 Transfer completed successfully.
local: BEACIC00 remote: BEACIC00
64560 bytes sent in 0.7 seconds (90 Kbytes/s)
.
.
.
Verify that the distribution libraries were uploaded. For the listing of files that should be on your system, refer to the List of Distribution Files and Members section.
Define the CICS VSAM files (Connections, Requesters, Service Names, User Connection, Inbound Service).
DELETE/DEFINE control cards VCON, VREQ, VSVC, VUSR, and VISN in the PDS "YOURHLQ".BEATCPC.CONTROL. Listing 4-11 is an example of a modified DELETE/DEFINE.DELETEYOURHLQ.BEATCPC.BEAVSVC-
CLUSTER PURGE -
DEFINE CLUSTER ( -
NAME (YOURHLQ.BEATCPC.BEAVSVC) -SHAREOPTIONS (2 3) -
KEYS (16 0) -
CISZ (1024) -
TRACKS (5 1) -VOLUMES (CICS01)) -DATA ( -
RECORDSIZE (56, 56) -
NAME (YOURHLQ.BEATCPC.BEAVSVC.DATA)) -INDEX ( _
NAME (YOURHLQ.BEATCPC.BEAVSVC.INDEX))
Change all instances of YOURHLQ.BEATCPC.BEAVSVC to a physical data set name that meets your standards. Change the TRACKS and VOLUMES parameters to appropriate values for your installation. The provided value for the TRACKS parameter works for most installations, but this value can be increased if necessary.
BLDVSAM JCL, complete the following steps.YOURHLQ.BEATCPC corresponding to each of the five VSAM files. The three data sets are as follows:
Before you go on to the next step, we recommend that you check the following items in PROCS CMPBC, CMPLMAP, CMPLKED, and LNKIBM in the PDS YOURHLQ.BEATCPC.JCL.
You may need to modify them to meet your standards. You will need to review the following:
The default names for BEA TMA TCP for CICS Mapsets, Programs, Transids, and VSAM data sets are listed in Appendix A, “Changing Resource Names.” If you want to use a different naming convention, use the procedure for changing names included after each table.
| Note: | You must have the C 370 compiler to customize resource names. |
| Note: | A “COND CODE 0004” may result due to the DELETE commands for non-existent CSD objects. |
To build the executables for BEA TMA TCP for CICS, you need to complete the following tasks.
MAKLMAP (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.JOBCARD to your standards.PROCS JCLLIB card with the correct HLQ.YOURHLQ, PDSOBJS and LNKLIB for your PDS.| Note: | LNKLIB is where your CICS region executable binary files reside. |
PROG, if you renamed mapsets.MAKLMAP.The following sections explain the procedures for linking programs and mapsets prior to running the BEA TMA TCP for CICS product.
| Note: | The following sections apply for a C 370 compiler. |
Pre-Link/Link the CICS Admin Programs (MainMenu, Connection, Requester, Outbound Service Name, Inbound Service Name, User Connection Account, Handler Configuration). In the JCL in MAKL1 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
JOBCARD to your standards.PROCS JCLLIB card with the correct HLQ.YOURHLQ, PDSOBJS, TCPLIB and LNKLIB for your PDS.| Note: | LNKLIB is where your CICS region executable binary files reside. |
LKED.SYSIN program names, if you renamed programs.MAKL1.| Note: | A “COND CODE = 004” is normal. |
Pre-Link/Link the CICS utility Programs (Pre-Requester, Application Handler, Shutdown, and Configuration Converter). In the JCL in MAKL0 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
JOBCARD to your standards.PROCS JCLLIB card with the correct HLQ.YOURHLQ, PDSOBJS, TCPLIB and LNKLIB for your PDS.| Note: | LNKLIB is where your CICS region executable binary files reside. |
LKED.SYSIN program names, if you renamed programs.MAKL0.| Note: | A “COND CODE = 004” is normal. |
Pre-Link/Link the CICS TCP Programs (Requester and Handler). In the JCL in MAKL3 (from the PDS "YOURHLQ".BEATCPC.JCL"), complete the following steps.
JOBCARD to your standards.YOURHLQ, PDSOBJS, TCPLIB and LNKLIB for your PDS.| Note: | LNKLIB is where your CICS region executable binary file resides. |
INCLUDE OBJECT program name, if you renamed programs.LKED.SYSIN program names, if you renamed programs.MAKL3.| Note: | A “COND CODE = 004” is normal. |
If you do NOT have the C 370 compiler, use the following procedure to Linkedit the PreLinked objects. Link the Prelinked objects of the following programs.
In the JCL in MAKLKED (from the PDS "YOURHLQ.BEATCPC.JCL"), complete the following steps.
Log on to your CICS region to install and verify the components you set up for BEA TMA TCP for CICS.
| Note: | Recent releases of CICS allow this task to be with CSD instead of this method. |
LNKLIB) to the DFHRPL concatenation. //BEALOG DD SYSOUT=*,DCB=(DSORG=PS,RECFM=V,BLKSIZE=136)
| Note: | If DSN statements were added to the CSDU, this step is not necessary. |
The following is an example of a CICS startup JCL.
//CICSREG JOB
//CICSCNTL EXEC PGM=IDCAMS,REGION=1M
//SYSPRINT DD SYSOUT=*
//SYSIN DD DISP=SHR,DSN=CICSTS31.SYSIN(DFHRCYES)
//DTCNTL EXEC PGM=IDCAMS,REGION=1M
//SYSPRINT DD SYSOUT=*
//SYSIN DD DISP=SHR,DSN=CICSTS31.SYSIN(DFHRCNO)
//*
//CICS EXEC PGM=DFHSIP, REGION=32M, TIME=1439, COND=(1,NE,CICSCNTL),
// =START=COLD,SYSIN,SEC=NO,GRPLIST=ETPLIST
//STEPLIB DD DISP=SHR,DSN=CICSTS31.SVTSC.SDFHAUTH
// DD DISP=SHR,DSN=CICSTS31.SDFHAUTH
// DD DISP=SHR,DSN=MASTCAT.MQM112.SCSQAUTH
// DD DISP=SHR,DSN=COB2140.COB2CICS.MODLIB
// DD DISP=SHR,DSN=C370.SEDCLINK
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEECICS
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEERUN
//DFHRPL DD DISP=SHR,DSN=CICSTS31.SVTSC.SDFHLOAD
// DD DISP=SHR,DSN=CICSTS31.SDFHLOAD
// DD DISP=SHR,DSN=BEA.BEA100.BEALOAD
// DD DISP=SHR,DSN=TCPIP.V3R1.SEZALINK
// DD DISP=SHR,DSN=TCPIP.V3R1.SEZATCP
// DD DISP=SHR,DSN=MQM112.SCSQCICS
// DD DISP=SHR,DSN=MQM112.SCSQLOAD
// DD DISP=SHR,DSN=COB2140.COB2CICS
// DD DISP=SHR,DSN=MASTCAT.COB2140.COB2LIB
// DD DISP=SHR,DSN=MASTCAT.PLI230.PLILINK
// DD DISP=SHR,DSN=C370.SEDCLINK
// DD DISP=SHR,DSN=ERW121.SERWLOAD
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEECICS
// DD DISP=SHR,DSN=ADLE370.V1R3M0.SCEERUN
//SYSIN DD DISP=SHR,DSN=CICSTS31.CICS.SYSIN(TCICS)
//DFHCSD DD DISP=SHR,DSN=CICSTS31.DFHCSD
//DFHCMACD DD DISP=SHR,DSN=CICSTS31.DFHCMACD
//DFHJ01A DD DISP=SHR,DSN=CICSTS31.CICS.DFHJ01A
//DFHJ01B DD DISP=SHR,DSN=CICSTS31.CICS.DFHJ01B
//DFHJ01X DD DISP=SHR,DSN=CICSTS31.CICS.DFHJ01X
//DFHAUXT DD DISP=SHR, DSN=CICSTS31.CICS.DFHAUXT,
//DFHBUXT DD DISP=SHR, DSN=CICSTS31.CICS.DFHBUXT,
//DFHDMPA DD DISP=SHR,DSN=CICSTS31.CICS.DFHDMPA
//DFHDMPB DD DISP=SHR,DSN=CICSTS31.CICS.DFHDMPB
//DFHRSD DD DISP=SHR,DSN=CICSTS31.CICS.DFHRSD
//DFHGCD DD DISP=SHR,DSN=CICSTS31.CICS.DFHGCD
//DFHLCD DD DISP=SHR,DSN=CICSTS31.CICS.DFHLCD
//DFHXRMSG DD DISP=SHR, DSN=CICSTS31.CNTL.CICS.DFHXRMSG
//DFHXRCTL DD DISP=SHR,DSN=CICSTS31.CNTL.CICS.DFHXRCTL
//DFHTEMP DD DISP=SHR,DSN=CICSTS31.CNTL.CICS.DFHTEMP
//DFHINTRA DD DISP=SHR,DSN=CICSTS31.CNTL.CICS.DFHINTRA
//DFHJACD DD DISP=SHR,DSN=CICSTS31.CICS.DFHJACD
//DFHJPDS DD DISP=SHR,DSN=CICSTS31.DFHJPDS
//DFHJOUT DD SYSOUT=(A,INTRDR)
//DFHCXRF DD SYSOUT=X
//MQMMSG DD SYSOUT=*
//LOGUSR DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//MSGUSR DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//TCPDATA DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136)
//BEALOG DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=136) ** BEA Connect
//COUT DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//PLIMSG DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//COUT DD SYSOUT=*, DCB=(DSORG=PS,RECFM=V, BLKSIZE=137)
//SYSABEND DD SYSOUT=*
//TRACEOUT DD SYSOUT=*
//PRINTER DD SYSOUT=*,DCB=BLKSIZE=121
//*
//PRTDMPA EXEC PGM=DFHDUP, PARM=SINGLE, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICSTS31.SDFHLOAD,DISP=SHR
//SYSIN DD DUMMY
//DFHDMPDS DD DISP=SHR,DSN=CICSTS31.CICS.DFHDMPA
//DFHTINDX DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//DFHPRINT DD SYSOUT=*
//*
//PRTDMPB EXEC PGM=DFHDUP, PARM=SINGLE, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICSTS31.SDFHLOAD,DISP=SHR
//SYSIN DD DUMMY
//DFHDMPDS DD DISP=SHR,DSN=CICSTS31.CICS.DFHDMPB
//DFHTINDX DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//DFHPRINT DD SYSOUT=*
//*
//* PRTAUXT EXEC PGM=DFHTUP, REGION=0M, COND=(1,NE,DTCNTL)
//* STEPLIB DD DSN=CICSTS31.SDFHLOAD,DISP=SHR
//* DFHAUXT DD DISP=OLD,DSN=CICSTS31.CICS.DFHAUXT
//* DFHAXPRT DD SYSOUT=*
//* DFHAXPRM DD DUMMY
//*
//PRTBUXT EXEC PGM=DFHTUP, REGION=0M, COND=(1,NE,DTCNTL)
//STEPLIB DD DSN=CICSTS31.SDFHLOAD,DISP=SHR
//DFHAUXT DD DISP=SHR,DSN=CICSTS31.CICS.DFHBUXT
//DFHAXPRT DD SYSOUT=*
//DFHAXPRM DD DUMMY
The following tables list and describe the members that make up each distribution partitioned data set.
Verify that the following members are installed by BEA TMA TCP for CICS.
Verify that the following members are installed by BEA TMA TCP for CICS.
Verify that the following members are installed by BEA TMA TCP for CICS.
Verify that the following members are installed by BEA TMA TCP for CICS.
Verify that the following members are installed by BEA TMA TCP for CICS.
Verify that the following members are installed by BEA TMA TCP for CICS:
|