1. Library Guide
  2. Install the Library
  3. Install the Expansion Module
  4. Prepare the Expansion Module by Removing the Cartridge Magazines

Prepare the Expansion Module by Removing the Cartridge Magazines

Remove the cartridge magazines to access the mounting holes of the Expansion Module.

Figure 2-15 Magazine Latches

Interior view of Expansion Module showing magazine latch

Illustration Legend:

  • 1 - Module Flanges
  • 2 - Unlatched Position
  • 3 - Latched Position
  1. Remove the Expansion Module from the shipping container.
  2. Reach behind the front panel and lift the latch to release the magazine.

    The Expansion Module is open at the top, and the latches are located behind the front face of the module.

    Tip:

    You can also release the magazine with the hex tool . See Remove the Cartridge Magazine with the Hex Key.

  3. Remove and set aside the cartridge magazines.