Table of Contents
- Title and Copyright Information
- Using This Documentation
- 1 About the Oracle Server X9-2
-
2
Troubleshooting and Diagnostics
- Troubleshooting Server Component Hardware Faults
- Troubleshooting With Diagnostic Tools
- Attaching Devices to the Server
- Getting Help
- Auto Service Requests
-
3
Preparing for Service
- Safety Precautions
- Safety Symbols
- Electrostatic Discharge Safety
- FRU Key Identity Properties (KIP) Automated Update
- Required Tools
-
Preparing the Server for Component Replacement
-
Powering Down the Server
- Power Down Server Gracefully Using the Oracle ILOM CLI
- Power Down Server Gracefully Using the Oracle ILOM Web Interface
- Power Down Server Gracefully Using the On/Standby Button
- Power Down the Server for Immediate Shutdown Using the On/Standby Button
- Power Down the Server for Immediate Shutdown Using the Oracle ILOM CLI
- Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web Interface
- Disconnect Cables From the Server
- Extend the Server to the Maintenance Position
- Remove the Server From the Rack
- Take Antistatic Measures
- Remove the Server Top Cover
-
Powering Down the Server
-
4
Servicing Storage Drives (CRU)
- Storage Drives Hot-Plug Conditions
- Storage Drive Failure and RAID
- Storage Drive Locations and Numbering
- Removing and Replacing a Storage Drive
- Removing and Replacing an NVMe Storage Drive Using Oracle Solaris
- Removing and Replacing an NVMe Storage Drive Using Oracle Linux
- Removing and Replacing an NVMe Storage Drive Using Microsoft Windows Server
- 5 Servicing Fan Modules (CRU)
- 6 Servicing Power Supplies (CRU)
-
7
Servicing the DIMMs (CRU)
- DIMM and Processor Physical Layout
- DIMM Population Scenarios
- DIMM Population Rules
- Populating DIMMs for Optimal System Performance
- Populating DIMMs in Single-Processor Systems for Optimal System Performance
- Populating DIMMs in Dual-Processor Systems for Optimal System Performance
- DIMM Operating Speeds
- DIMM Rank Classification Labels
- Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Failed DIMMs
- Using the Server Fault Remind Button
- Identify and Remove a DIMM
- Install a DIMM
- 8 Servicing PCIe Risers (CRU)
- 9 Servicing PCIe Cards (CRU)
- 10 Servicing the Internal M.2 Flash SSDs (CRU)
- 11 Servicing the Battery (CRU)
- 12 Servicing Processors (FRU)
- 13 Servicing the Disk Backplane (FRU)
- 14 Servicing the Front LED Indicator Module (FRU)
- 15 Servicing the Temperature Sensor (FRU)
- 16 Servicing the NVMe Cables
- 17 Servicing Other Cables (FRU)
- 18 Servicing the OCP Network Interface Card (FRU)
- 19 Servicing the Motherboard Assembly (FRU)
- 20 Returning the Server to Operation
- 21 Identifying the Server Ports
- 22 Setting Up BIOS Configuration Parameters
-
23
BIOS Setup Utility Menu Options
- Main Menu
-
Advanced Menu
- Trusted Computing 2.0 Options
- Serial Port Console Redirection
- NVMe Configuration
- Network Stack Configuration
- PCI Subsystem Settings
- SATA Configuration
- Disk Freeze Lock
- Processor Configuration
- Intel Platform Configuration
- Intel Socket Configuration
- MD SSD Ports Configuration
- USB Port
- All CPU Information
- RAM Disk Configuration
- iSCSI Configuration
- Driver Health
- Intel VROC SATA Controller
- Intel Virtual RAID on CPU
- IO Menu
- Security Menu
- Boot Menu
- Exit Menu
- 24 Monitoring Components and Identifying SNMP Messages
- Index