SMOD Status Indicators and Buttons
This section describes the server SMOD features.
The following figure shows the indicators, buttons, and ports on an SMOD.
-
For single 4-socket systems, the indicators on SMOD1 are inactive.
-
For single 8-socket systems, the SMOD1 indicators are still active but the system-level indicators remain inactive.
| Callout | Description |
|---|---|
|
1 |
Locate indicator/button – Used to identify the server. |
|
2 |
Chassis Service Required indicator (SMOD0 only) |
|
3 |
System OK – For details, see Controlling System Power. |
|
4 |
SP OK – Steady on if SP is operating, blinks while SP is booting, off if SP has no power. |
|
5 |
SMOD Service Required indicator – Indicates a system module (SMOD) fault |
|
6 |
SMOD OK indicator – Steady on if SMOD is operating, blinks while SMOD is booting, off if SMOD has no power. |
|
7 |
HBA Service Required indicator – Indicates a host bus adapter (HBA) fault |
|
8 |
NET0, NET1, NET2, and NET3 ports |
Note:
For details on system power and the related controls and indicators, see Controlling System Power.