1. Oracle ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 5.1.x
  2. Managing Oracle Hardware Faults Through the Oracle ILOM Fault Management Shell
  3. Using fmadm to Administer Active Oracle Hardware Faults
  4. View Information About Active Faulty Components (fmadm faulty)

View Information About Active Faulty Components (fmadm faulty)

Note:

For Oracle hardware customers, the recommended method for viewing active information about faulty components is to view the health state of a component in the Open Problems tabular output, which is provided in the Oracle ILOM CLI and web interface.

To view information about active faulty components from the Oracle ILOM Fault Management Shell, do the following:

  1. From the Oracle ILOM CLI, launch the Fault Management Shell, as described in Launch a Fault Management Shell Session (CLI).
    The faultmgmtsp> prompt appears.
  2. To view information about active faulty hardware components reported for a managed device, type:
    fmadm faulty display_option

    where display_option can be one of the following:

    • -a – Show active faulty components, type:
    • -f – Show active faulty FRUs.
    • -r – Show active fault FRUs and their fault management states.
    • -s – Show a one-line fault summary for each fault event.
    • -u uuid – Show fault diagnosis events that match a specific universal unique identifier (uuid).
  3. When applicable, refer to the http:// referenced knowledge article in the fmadm faulty output for further instructions for resolving a reported problem.

Related Information