1. Oracle Hardware Management Pack 2.4 Server Management Agents User's Guide
  2. Configuring Oracle ILOM SNMP Trap Forwarding Using itpconfig
  3. Host-to-ILOM Interconnect Configuration Commands
  4. How to Enable Host-to-ILOM Interconnect

How to Enable Host-to-ILOM Interconnect

The Host-to-ILOM Interconnect can be enabled during the Hardware Management Pack installation. See Enabling the Host-to-ILOM Interconnect in Oracle Hardware Management Pack 2.4 Installation Guide for details.

Alternatively, you can use itpconfig to enable this feature and manage its properties.

Note:

It is recommended that you use this command without any arguments and let itpconfig choose the settings. You can override the defaults with different IP and netmask addresses, but this is for advanced users only.

  1. Issue the following command:

    # itpconfig enable interconnect [--ipaddress=ipaddress] [--netmask=netmask] [--hostipaddress=hostipaddress]

    Option Description Example

    --ipaddress

    Oracle ILOM IP address. This address must be in the format: 169.254.x.x

    169.254.175.72

    --netmask

    Oracle ILOM netmask.

    255.255.255.0

    --hostipaddress

    Host IP address. This address must be in the format: 169.254.x.x

    169.254.175.73

Parent topic: Host-to-ILOM Interconnect Configuration Commands