1. Oracle Hardware Management Pack 2.4 Server CLI Tools User's Guide
  2. Using ilomconfig to Configure Oracle ILOM
  3. Modifying Oracle ILOM Configurations
  4. Modify IPv4 Network Settings

Modify IPv4 Network Settings

To modify IPv4 settings, use the ilomconfig modify network command. This command modifies IP address, netmask, gateway, DHCP settings, and sideband. When you specify an XML file name, the command modifies information defined in the exported service processor configuration XML file rather than modifying Oracle ILOM.

  1. To modify IPv4 network settings, type:

    # ilomconfig modify network [--ipdiscovery=static|dhcp] [--ipaddress=ipaddress] [--netmask=netmask] [--gateway=gateway] [--state=enabled|disabled] [--mgmtport=port] [--xmlfile=filename.xml]

    Option Description Example

    --ipdiscovery

    Network discovery mechanism. Can be either static or DHCP.

    static or dhcp

    --ipaddress

    Oracle ILOM IP address

    192.0.2.10

    --netmask

    Netmask address

    255.255.255.0

    --gateway

    Gateway address

    192.0.2.248

    --state

    Oracle ILOM management port state

    enabled or disabled

    --mgmtport

    Oracle ILOM management port path

    /SYS/SP/NET0 or SYS/MB/SP/NETMGMT

    --xmlfile

    Modify specified XML file rather than local Oracle ILOM service processor. Must be followed by = and the pathname to the file.

    file.xml

Parent topic: Modifying Oracle ILOM Configurations