ILOM Watchdog Parameters

Previous Next JavaScript must be enabled to correctly display this content

ILOM Watchdog Parameters

The ILOM watchdog parameters can be set by the user in one of the following ways:

Preferred method: Use the ilomconfig modify ilomwatchdog command with the ilomwatchdog target to change the parameters. See ILOM Watchdog ilomconfig Commands.
Manually edit the configuration file. See Manually Edit the Configuration File in Oracle Hardware Management Pack 2.4 Server Management Agents User’s Guide.

The following table lists the ILOM watchdog parameters.

Parameter Name	Parameter in Configuration File	Description	Possible Values	Default value
Query Time Interval	`ilom_watchdog_query_time_interval`	The periodic time interval, in seconds, at which the host will send a query to Oracle ILOM. If Oracle ILOM does not respond, then this indicates that Oracle ILOM is unresponsive, and the host performs the Timer Action.	Positive integer up to 214748364	60 seconds
Timer Action	`ilom_watchdog_timer_action`	The action which the host performs when it notices that Oracle ILOM is unresponsive.	`Warning\|Reset`	Warning
Number of Consecutive SP Resets	`ilom_watchdog_number_sp_reset`	If the value of Timer Action is Reset, this parameter tells the host the number of times the host resets the SP until it gives up.	Positive integer up to 20	2
Admin State	`ilom_watchdog_admin_state`	The state which the user (Admin) sets the ILOM watchdog.	`Enable\|Disable`	Disable

Parent topic: ILOM Watchdog Overview