1. Oracle Server CLI Tools for Oracle Solaris 11.4 User's Guide
  2. Using ilomconfig to Configure Oracle ILOM
  3. Modifying Oracle ILOM Configurations
  4. Modify IPv6 Network Settings

Modify IPv6 Network Settings

To modify IPv6 settings, use the ilomconfig modify network-ipv6 command. This command lists IP address, netmask, gateway, DHCP settings, and sideband. When you specify an XML file name, the command modifies information defined in the exported service processor configuration XML file rather than modifying Oracle ILOM.

  1. To modify IPv6 network settings, type:

    # ilomconfig modify network-ipv6 [--static-ipaddress=IPv6_address] [--autoconfig=disabled|stateless|dhcpv6_stateful|dhcpv6_stateless] [--state=enabled|disabled] [--xmlfile=filename.xml]

    Option Description Example

    --static-ipaddress

    Oracle ILOM IPv6 static address.

    2001:0db0:0000:82a1:0000:0000:1234:abcd

    --autoconfig

    Oracle ILOM IPv6 autoconfiguration state.

    When using Oracle ILOM 3.0.12.x:

    disabled, stateless_only

    When using Oracle ILOM 3.0.14.x:

    disabled, stateless, dhcpv6_stateful, dhcpv6_stateless

    --state

    Oracle ILOM IPv6 administrative state.

    enabled or disabled

    --xmlfile

    Modify specified XML file rather than local Oracle ILOM service processor. Must be followed by = and the pathname to the file.

    file.txt

Parent topic: Modifying Oracle ILOM Configurations