Display a Detailed Listing of a Device

To show a detailed listing of a device, type:

raidconfig list device option devicename -v

For example for a disk:

# raidconfig list disk -d=c0d0 -v

Disk c0d0
=========
ID: c0d0
Chassis: 0
Slot: 0
Node ID: PDS:5000cca0257dbac1
Mapped to Host OS: true
Device: 5000CCA0257DBAC0
Disabled: false
Type: sas
Media: HDD
Manufacturer: HITACHI
Model: H106030SDSUN300G
Size (GiB): 279
Serial Number: 001214N74K2B        PQJ74K2B
NAC Name: /SYS/SASBP/HDD0
Current Task: none

For example for a controller:

# raidconfig list controller -v

CONTROLLER c0
=============
Node ID: mptir2:50:00.0
Manufacturer: LSI Logic
Model: SG-SAS6-INT-Z
F/W Version: 11.05.03.00
Serial Number: 500605b005468020
RAID Volumes: 1
Disks: 8
PCI Address: 50:00.0
PCI Vendor ID: 0x1000
PCI Device ID: 0x0072
PCI Subvendor ID: 0x1000
PCI Subdevice ID: 0x3050
Battery Backup Status: Not installed
Max RAID Volumes: 2
Max Disks per RAID Volume: 256
Supported RAID Levels: 0, 1, 10
Max Dedicated Spares: 0
Max Global Spares: 2
Stripe Size Min (KB): 64
Stripe Size Max (KB): 64

The following table lists the possible Battery Backup statuses that can be displayed with the raidconfig list controller command.

Status	Meaning
Not Installed	The battery backup option is not installed.
OK	The status of the battery backup is OK.
Charging	The battery backup is charging.
Discharging	The battery backup is discharging.
Low voltage	There is low voltage to the HBA on-board memory and the battery backup has become its primary source of power.
High temperature	The battery backup is overheating. This can cause the battery to stop charging and reduce its life expectancy.
Failed	The battery backup has failed and might need to be replaced.
Missing	The battery backup hardware is missing, malfunctioning, unplugged or fully discharged.

Parent topic: Listing Controller, RAID and Disk Information