1. Setup Guide
  2. Express Station and Accessories Setup and Use
  3. Securing the Express Station to the Wall Mount

Securing the Express Station to the Wall Mount

The Express Station 4 Series can be mounted on a wall using an optional wall mount bracket.**

  1. Install the wall mount:
    1. Ensure that the metal bracket is levelled with the integrated spirit level.
    2. Mark the positions of the holes at the four corners.
    3. Create the holes by drilling into the wall.
    4. Secure the metal bracket to the wall with four screws. The mounting screws are not provided. Ensure you are using the correct screws that meet the needs of the installation, such as wood screws, dry wall screws, concrete screws, or masonry screws.

      This figure shows how to secure the metal wall mount bracket to the wall.
  2. Align the back of the Express Station to the metal bracket, and then slide it down until it stops.

    This figure shows how to align the Express Station to the metal bracket.
  3. Slide the locking slide bar to the right and tighten the hex screw with a hex wrench.

    This figure shows the location of the locking slide bar.
  4. Connect any required cables. Note: You must remove the Express Station IO panel cover
    before you can connect cables.

  5. Reinstall and Secure the Express Station IO panel cover.

    **Wall mount installation methods include:

    • Basic Wall Mounting (described in steps 1–5): The wall mount bracket is attached to the surface of the wall. Cables and power supplies are exposed and can be organized using cable ties and cable casing.

    • Recessed/In-Wall Cage with Cable Management and Concealed Power Supply Storage: A portion of the wall is cut away and a recessed support cage provides a hidden area for cable organization. The wall mount bracket is then attached to the wall over the recessed area. Exposed cables can be organized using cable casing.

    Figure 4-1 Example Wall-Mounted Workstation (Recessed/In-Wall Cage)


    This figure shows a wall-mounted Workstation 6 Series workstation.

Parent topic: Express Station and Accessories Setup and Use