1. Setup Guide
  2. BIOS Configuration
  3. Configuring Express Station Settings

Configuring Express Station Settings

The BIOS Workstation screen contains common options for configuring your Express Station. To access the Workstation screen:

  1. From the BIOS Home screen, tap the Workstation option.

Table 9-1 Workstation Settings

Setting Description of Option

COM Port 1 Voltage
Select a voltage for the COM 1 port:

  • 0 Volts (default)

  • 5 Volts

  • 9 Volts

  • 12 Volts

USB Ports (1–5) After Shutdown

Enable or Disable the USB ports 1-5 after the workstation has been shut down.

USB Port 1

Enable or Disable USB port 1.

USB Port 2

Enable or Disable USB port 2.

USB Port 3

Enable or Disable USB port 3.

USB Port 4

Enable or Disable USB port 4.

USB Port 5

Enable or Disable USB port 5.

422 Mode Selection

Enable or Disable RS-422 mode for the IDN port.

422/232 Mode Selection

Select 422 Mode or 232 Mode to enable RS-422 mode or RS-232 mode for the IDN port.

Power Failure Restoration
Select the action taken by the system in the event of a power failure:

  • Remain Off: The system remains powered off even if it was originally powered on.

  • Last State: If the system was on when power failed, the system powers on. If the system was off, the system remains off.

  • Power On: The system powers on even if it was originally powered off.

Factory Recovery
Select factory recovery settings:

  • Disable: You cannot perform factory recovery.

  • Enable: Launches a troubleshooting screen on the next bootup. Refer to System Recovery for more information.

Parent topic: BIOS Configuration