1. Loan Servicing Setup Guide
  2. Administration System
  3. System Parameters
  4. System Parameters Setup

2.1.1 System Parameters Setup

The System Parameters Setup screen displays and records each system wide parameter, along with its current value and whether or not it is enabled. These parameters relate to the overall processing of the system, such as application server file locations and data purging configuration.

To set up the System Parameters
  1. Click Setup > Setup > Administration > System > System Parameters > System. The system displays the System Parameter screen.
  2. In the System Parameters section, perform any of the Basic Operations mentioned in Navigation chapter.

    Figure 2-1 System Parameters


    Description of Figure 2-1 follows
    Description of "Figure 2-1 System Parameters"

    A brief description of the fields is given below:

    Table 2-2 System Parameters setup

    Parameter Type Parameter Range
    Parameter System parameter of the specified parameter description is displayed here.
    Parameter Description Select the description of system parameter from the drop-down list.
    Parameter Value Specify the value for the system parameter (required).
    Enabled Check this box to enable the parameter.
  3. Perform any of the Basic Actions mentioned in Navigation chapter.

For a detailed list of available parameters, refer to Appendix System Parameters chapter.

This section consists of the following topic:

Parent topic: System Parameters