This topic provides the systematic instructions to capture the additional details in Scrutiny stage of Export LC Cancellation - Islamic process.

1. On Additional Details screen, click on any Additional Details tile to view the details.

   Figure 2-13 Additional Details
   
   Description of the illustration deadditionaldetails.png
   

   Limits and Collaterals

   Limit availability needs to be checked if involves increase in amount or tolerance or both. TThis is applicable for confirmation of the unconfirmed LC or increasing the amount or tolerance if already LC is already confirmed.

   On Approval, system should not release the Earmarking against each limit line and system should handoff the “Limit Earmark Reference Number “to the back office. On successful handoff, back office will make use of these “Limit Earmark Reference Number” to release the Limit Earmark done in the mid office (OBTFPM) and should Earmark the limit from the Back office.

   In case multiple Lines are applicable, Limit Earmark Reference for all lines to be passed to the back office.

   
   
   Description of the illustration delimitdetails.png
   

   Figure 2-14 Limit Details
   
   Description of the illustration delimitdetails1.png
   

   Figure 2-15 Collateral Details
   
   Description of the illustration decollateraldetails1.png
   

   For more information on fields, refer to the field description table below.

   Table 2-16 Limit Details - Field Description

   Field	Description
   Limit Details	Click plus icon to add new limit details. Below fields are displayed on the Limit Details pop-up screen, if the user clicks plus icon.
   Customer ID	This field displays the applicant’s/applicant bank customer ID defaulted from the application.
   Linkage Type	Select the linkage type. Linkage type can be: Facility Liability By default Linkage Type should be Facility.
   Contribution %	System will default this to 100%. User can modify, if contribution is more than 100%. System will display an alert message, if modified. Once contribution % is provided, system will default the amount. System to validate that if Limit Contribution% plus Collateral% is equal to 100. If the total percentage is not equal to 100 application will display an alert message. Note: The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Liability Number	Click Search to search and select the Liability Number from the look-up. The list has all the Liabilities mapped to the customer.
   Contribution Currency	This field displays the contribution currency.
   Line ID/Linkage Ref No	Click Search to search and select from the various lines available and mapped under the customer id gets listed in the drop-down. LINE ID-DESCRIPTION will be available for selection along with Line ID. When you click on 'verify', the system will return value if the limit check was successful or Limit not Available. If limit check fails, the outstanding limit after the transaction value will be shown in the limit outstanding amount. The user can click the Line Id link to view the limit details. Note: User can also select expired Line ID from the lookup and on clicking the verify button, system should default “The Earmarking cannot be performed as the Line ID is Expired” in the “Response Message” field. This field is disabled and read only, if Linkage Type is Liability.
   Limit/Liability Currency	This field displays the limit currency, when the user select the Liability Number.
   Limits Description	This field displays the limits description.
   Limit Check Response	This field displays the limit check response. Response can be ‘Success’ or ‘Limit not Available’ based on the limit service call response. The value in this field appears, if you click the Verify button.
   Amount to Earmark	This field defaults the amount to earmark. Contribution amount will default based on the contribution %. User can change the value.
   Expiry Date	This field displays the date up to which the Line is valid.
   Limit Available Amount	This field displays the value of available limit, i.e., limit available without any earmark. The Limit Available Amount must be greater than the Contribution Amount. The value in this field appears, if you click the Verify button.
   Response Message	This field displays the detailed response message. The value in this field appears, if you click the Verify button.
   ELCM Reference Number	This field displays the ELCM reference number.
   Limit Details grid	Below fields appear in the Limit Details grid along with the above fields.
   Line Serial	Displays the serial of the various lines available and mapped under the customer id. This field appears on the Limits grid.
   Edit	Click the link to edit the Limit Details.
   Cash Collateral Details	Specify the Cash Collateral Details.
   Collateral Percentage	System populates the Collateral % maintained in the Customer / Product for the counter party of the contract. User can modify the collateral percentage.
   Collateral Currency and amount	System populates the contract currency as collateral currency by default. User can modify the collateral Currency and amount.
   Exchange Rate	System populates the exchange rate maintained. User can modify the collateral Currency and amount. System validates for the Override Limit and the Stop limit if defaulted exchange rate is modified.
   Collateral Details pop-up screen	Click + plus icon to add new collateral details. Below fields are displayed on the Collateral Details pop-up screen, if the user clicks plus icon.
   Edit	Click edit link to edit the collateral details.
   Total Collateral Amount	Read only field. This field displays the total collateral amount provided by the user.
   Collateral Amount to be Collected	Read only field. This field displays the collateral amount yet to be collected as part of the collateral split.
   Sequence Number	Read only field. The sequence number is auto populated with the value, generated by the system.
   Collateral Split %	Specify the collateral split% to be collected against the selected settlement account.
   Collateral Contribution Amount	Specify the collateral amount to be collected against the selected settlement account. User can either provide the collateral % where the collateral amount will be auto populated or modifying the collateral amount will auto correct the collateral %.
   Settlement Account	Click Search to search and select the settlement account for the collateral.
   Settlement Account Currency	Read only field. This field displays the settlement account currency defaulted by the system.
   Exchange Rate	Read only field. This field displays the exchange rate, if the settlement account currency is different from the collateral currency.
   Contribution Amount in Account Currency	Read only field. This field displays the contribution amount in the settlement account currency as defaulted by the system.
   Account Available Amount	Read only field. System populates the account available amount on clicking the Verify button.
   Response	Read only field. System populates the response on clicking the Verify button.
   Response Message	Read only field. System populates the response message on clicking the Verify button.
   Verify	Click to verify the account balance of the Settlement Account.
   Save & Close	Click to to save and close the record.
   Cancel	Click to cancel the entry.
   Cash Collateral Details grid	Below fields appear in the Cash Collateral Details grid along with the above fields.
   Collateral %	Specify the percentage of collateral to be linked to this transaction. If the value is more than 100% system will display an alert message. The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Contribution Amount	This field displays the collateral contribution amount. The collateral % maintained for the customer is defaulted into the Collateral Details screen. If collateral % is not maintained for the customer, then system should default the collateral % maintained for the product. User can modify the defaulted collateral percentage, in which case system should display a override message “Defaulted Collateral Percentage modified.
   Edit	Click edit link to edit the collateral details.
   Account Available Amount	This field displays the account available amount which will be auto-populated based on the settlement account selection.
   Deposit Linkage Details	In this section which the deposit linkage details is captured. System should allow the user to Link one or more existing Deposits as a contribution to secure underlying transactions. On Submit of DE stage, system will create Linkage of the Deposit/modification of existing Linkage by calling Back-office system (DDA) system directly. Click + plus icon to add new Deposit Linkage details.
   Edit	Click edit link to edit the deposit linkage details.
   Deposit Linkage Details pop-up screen	Below fields are displayed on the Deposit Linkage Details pop-up screen, if the user clicks plus icon.
   Deposit Account	Click Search to search and select deposit for linkage from the list of all the customer Deposits. All the Deposits of the customer should be listed in the LOV search. User should be able to select the deposit for linkage.
   Deposit Branch	This field displays the deposit branch which will be auto-populated based on the deposit account selection.
   Deposit Available Amount	This field displays the deposit available amount and currency which will be auto-populated based on the deposit account selection.
   Deposit Maturity Date	This field displays the maturity date of deposit based on the deposit account selection.
   Exchange Rate	This field displays the latest exchange rate for deposit linkage. This will be picked up from the exchange rate maintenance from the common core.
   Deposit Available In Transaction Currency	This field displays the deposit amount available, after exchange rate conversion, if applicable.
   Linkage Percentage %	Specify the value for linkage percentage.
   Linkage Amount (Transaction Currency)	This field displays the transaction amount, user can change the value. System validates the linking amount with available Deposit balance and should not allow to link more than the available amount.
   Deposit Details grid	Below fields appear in the Deposit Details grid along with the above fields.
   Deposit Currency	This field displays the deposit currency.
   Transaction Currency	This field displays the transaction currency.

2. Click Save and Close to save the details and close the screen.

   Commission, Charges and Taxes

   This section displays Commission, Charges and Taxes details. On landing the additional tab, charges and tax if any will get defaulted from back end simulation. If default charges are available under the product, they should be defaulted here with values. If customer or customer group specific charges are maintained, then the same will be defaulted from back end system.

   
   
   Description of the illustration dechargedetails.png
   

   For more information on fields, refer to the field description table below.

   Table 2-17 Charge Details - Field Description

   Field	Description
   Commission Details	This section displays the Commission Details.
   Component	This field displays the commission component.
   Rate	This field displays the rate that is defaulted from product. The commission rate, if available in Back Office defaults in OBTFPM. The user is able to change the rate. If flat commission is applicable, then commission amount defaulted from back office is modifiable by the user. Rate field will be blank and the user cannot modify the Rate field.
   Modified Rate	From the default value, if the rate is changed the value gets updated in this field.
   Currency	This field displays the currency in which the commission have to be collected.
   Amount	This field displays the amount that is maintained under the product code. The commission rate, if available in Back Office defaults in OBTFPM. The user is able to change the rate, but not the commission amount directly. The amount gets modified based on the rate changed and the new amount is calculated in back office based on the new rate and is populated in OBTFPM. If flat commission is applicable, then commission amount defaulted from back office is modifiable by the user. Rate field will be blank and the user cannot modify the Rate field.
   Modified Amount	From the default value, if the amount is changed, the value gets updated in the modified amount field.
   Defer	If enabled, charges/commissions has to be deferred and collected at any future step.
   Waive	Based on the customer maintenance, the charges/commission can be marked for Billing or Defer. If the defaulted Commission is changed to defer or billing or waive, system must capture the user details and the modification details in the ‘Remarks’ place holder.
   Charge Party	Charge party is 'Applicant' by default. User can change the value to Beneficiary.
   Settlement Account	Select the settlement account.
   Charge Details	This section displays the Charge Details.
   Component	This field displays the charge component type.
   Tag Currency	This field displays the tag currency in which the charges have to be collected.
   Tag Amount	This field displays the tag amount that is maintained under the product code.
   Currency	This field displays the currency in which the charges have to be collected.
   Amount	This field displays the amount that is maintained under the product code.
   Modified	From the default value, if the rate is changed or the amount is changed, the value gets updated in the modified amount field.
   Billing	If charges are handled by separate billing engine, then by selecting billing the details to be available for billing engine for further processing. On simulation of charges/commission from Back Office, if any of the Charges/Commission component for the customer is ‘Billing’ enabled, ‘Billing’ toggle for that component should be automatically enabled in OBTFPM. The user can not enable/disable the option, if it is de-selected by default. This field is disabled, if ‘Defer’ toggle is enabled.
   Defer	If charges have to be deferred and collected at any future step, this check box has to be selected. On simulation of charges/commission from Back Office, if any of the Charges/Commission component for the customer is AR-AP tracking enabled, ‘Defer’ toggle for that component should be automatically checked in OBTFPM. The user can enable/disable the option the check box. On de-selection the user has to click on ‘Recalculate’ charges button for re-simulation.
   Waive	Enble the toggle, if charges has to be waived. Based on the customer maintenance, the charges should be marked for Billing or for Defer. This field is disabled, if Defer toggle is enabled.
   Charge Party	Charge party is applicant by default. User can change the value to beneficiary.
   Settlement Account	Select the settlement account.
   Tax Details	The tax component is calculated based on the commission and defaults if maintained at product level. User cannot update tax details and any change in tax amount on account of modification of charges/ commission will be available on click of Re-Calculate button or on hand off to back-end system.
   Component	This field displays the tax component.
   Type	This field displays the type of tax component.
   Value Date	This field displays the value date of tax component.
   Currency	This field displays the currency in which the tax have to be collected. The tax currency is the same as the commission.
   Amount	This field displays the tax amount based on the percentage of commission maintained. You can edit the tax amount, if applicable.
   Billing	If taxes are handled by separate billing engine, then by selecting billing the details to be available for billing engine for further processing. This field is disabled, if ‘Defer’ toggle is enabled.
   Defer	If taxes have to be deferred and collected at any future step, this option has to be enabled. The user can enable/disable the option the check box. On de-selection the user has to click on ‘Recalculate’ charges button for re-simulation.
   Settlement Account	System defaults the settlement account. The user can modify the settlement account.

3. Click Save and Close to save the details and close the screen.
   Preview Messages

   The bank user can view a preview of the message and advice simulated from back office which is based on the export LC Cancellation captured in the previous screen.

   
   
   Description of the illustration deadditionaldetailspreviewmessages.png
   

   For more information on fields, refer to the field description table below.

   Table 2-18 Preview Messages - Field Description

   Field	Description
   Preview SWIFT Message	This section displays the Preview SWIFT Message details.
   Language	Read only field. English is set as default language for the preview.
   Message Type	Select the message type from the drop down. User can choose to see preview of different message like MT 700, MT 740 and MT 701.
   Message Status	Read only field. This field displays the message status of draft message of liquidation details.
   Repair Reason	Read only field. This field displays the message repair reason of draft message of liquidation details.
   Preview Message	This field displays a preview of the draft message.
   Preview Mail Device	This section displays the Preview Mail Device details.
   Language	Read only field. English is set as default language for the preview.
   Advice Type	Select the advice type.
   Message Status	Read only field. This field displays the message status of draft message of liquidation details.
   Repair Reason	Read only field. This field displays the message repair reason of draft message of liquidation details.
   Preview Message	This field displays a preview of the advice.

4. Click Save and Close to save the details and close the screen.
5. Click Next.
   The task will move to next data segment.

   For more information on action buttons, refer to the field description table below.

   Table 2-19 Additional Details - Action Buttons - Field Description

   Field	Description
   Documents	Upload the required documents. The user can view and input/view application details simultaneously. When a user clicks on the uploaded document, Document window get opened and on clicking the view icon of the uploaded document, Application screen should get split into two. The one side of the document allows to view and on the other side allows to input/view the details in the application.
   Remarks	Specify any additional information regarding the Export LC Cancellation - Islamic. This information can be viewed by other users handling the request. Content from Remarks field should be handed off to Remarks field in Backend application.
   Overrides	Click to view the overrides accepted by the user.
   Customer Instruction	Click to view/ input the following. Standard Instructions – In this section, the system will populate the details of Standard Instructions maintained for the customer. User will not be able to edit this. Transaction Level Instructions – In this section, OBTFPM user can input any Customer Instructions received as part of transaction processing. This section will be enabled only for customer initiated transactions.
   View LC	Click View LC to view the latest LC values displayed in the respective fields. All fields displayed in LC details section are read only fields..
   Signatures	Click the Signature button to verify the signature of the customer/ bank if required. The user can view the Customer Number and Name of the signatory, Signature image and the applicable operation instructions if any available in the back-office system. If more than one signature is required, system should display all the signatures.
   Reject	On click of Reject, user must select a Reject Reason from a list displayed by the system. Reject Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others Select a Reject code and give a Reject Description. This reject reason will be available in the remarks window throughout the process.
   Refer	Select a Refer Reason from the values displayed by the system. Refer Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others
   Hold	The details provided will be saved and status will be on hold.User must update the remarks on the reason for holding the task. This option is used, if there are any pending information yet to be received from applicant.
   Cancel	Cancel the Scrutiny stage inputs. The details updated in this stage are not saved. The task will be available in 'My Task' queue.
   Save & Close	Save the details provided and holds the task in ‘My Task’ queue for further update. This option will not submit the request.
   Back	On click of Back, task moves to previous logical step.
   Next	On click of Next, system validates if all the mandatory fields have been captured. Necessary error and override messages to be displayed. On successful validation, system moves the task to the next data segment.