Exceptions

2.3 Exceptions

This topic helps you quickly get acquainted with the Exceptions process.

As per regulatory requirement, all tasks are scrutinized for KYC, Compliance and Sanctions. The checks to external system/internal system is initiated after the Data Enrichment stage.

Exception - Amount Block

As part of amount block validation, application will check if sufficient balance is available in the account to create an amount block. On hand-off, system will debit the blocked account to the extent earmark and credit charges/ commission account in case of charges block or credit the amount in suspense account for earmarks created for collateral.

The transactions that have failed amount block due to non-availability of amount in respective account will reach the amount block exception stage.

Log in into application, amount block exception queue. Amount block validation failed tasks for trade transactions will be listed in the queue. Open the task to view summary of updated available fields with values.

On Approval, system should not release the Amount Block against each applicable account and system should handoff the “Amount Block Reference Number“ to the back office. On successful handoff, back office will make use of these “Amount Block Reference Number” to release the Amount Block done in the mid office (OBTFPMCS) and should debit the CASA account from the Back office.

If multiple accounts are applicable, , Amount Block Reference for all accounts to be passed to the back office.

Exception is created when sufficient balance is not available for blocking the settlement account and the same can be addressed by the approver in the following ways:

Approve:

Settlement amount will be funded (outside of this process)
Allow account to be overdrawn during hand-off

Refer:

Refer back to DE providing alternate settlement account to be used for block.
Different collateral to be mapped or utilize lines in place of collateral.

Reject:

Reject the transaction due to non-availability of sufficient balance in settlement account

Amount Bock Exception Description of amountblockexception.png follows
Description of the illustration amountblockexception.png

This section will display the amount block exception details.

Summary Description of amountblockexceptionsummary.png follows
Description of the illustration amountblockexceptionsummary.png

Tiles Displayed in Summary:

Main Details - User can view the application and LC details.
Advice Details - User can view the advice details.
Payment Details - User can view the payment details.
Maturity Details - User can view the maturity details.
Loan Preferences - User can view the set finance preferences details.
Limits and Collaterals - User can view limits and collateral details.
FX Linkage - User can view FX linkage details.
Preview Messages - User can preview the draft message generated if any.
Commission, Charges & Taxes - User can view the charge details.
Settlement Details - User can view the settlement details.
Parties Details - User can view party details like applicant, advising bank etc.
Compliance Details - User can view compliance details. The status must be verified for KYC and to be initiated for AML and Sanction Checks.
Assignment of Proceeds - User can view assignment of proceeds details.

Click Approve. to approve thw export booking amount bolck exception check.

For more information on Action Buttons, refer to the field description table below.

Table 2-26 Amount Bock Exception - Action Buttons - Field Description

Field	Description
Documents	View/Upload the required document.
Remarks	Specify any additional information regarding the collection. This information can be viewed by other users processing the request. Content from Remarks field should be handed off to Remarks field in Backend application.
Overrides	Click to view the overrides accepted by the user.
Customer Instruction	Click to view/ input the following Standard Instructions – In this section, the system will populate the details of Standard Instructions maintained for the customer. User will not be able to edit this. Transaction Level Instructions – In this section, OBTFPMCS user can input any Customer Instructions received as part of transaction processing. This section will be enabled only for customer initiated transactions.
View LC	Click to view the latest LC values displayed in the respective fields. All fields displayed in LC details section are read only fields.
Hold	The details provided will be saved and status will be on hold.User must update the remarks on the reason for holding the task. This option is used, if there are any pending information yet to be received from applicant.
Reject	On click of Reject, user must select a Reject Reason from a list displayed by the system. Reject Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others Select a Reject code and give a Reject Description. This reject reason will be available in the remarks window throughout the process.
Refer	Select a Refer Reason from the values displayed by the system. User can refer the task back to the Data Enrichment user.User must select a Refer Reason from the values displayed by the system. Refer Codes Refer Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others
Approve	On approve, application must validate for all mandatory field values, and task must move to the next logical stage.
Back	Task moves to previous logical step.

Exception - Know Your Customer (KYC) Description of kycexception.png follows
Description of the illustration kycexception.png

As part of KYC validation, application will check if necessary KYC documents are available and valid for the applicant. The transactions that have failed KYC due to non-availability / expired KYC verification will reach KYC exception stage.

Log in into OBTFPMCS application, KYC exception queue. KYC exception failed tasks for Trade Finance transactions will be listed in your queue.
Open the task, to see summary tiles that display a summary of available updated fields with values.
User can pick up a transaction and do the following actions:
Approve
- After changing the KYC status in the back end application (outside this process).
- Without changing the KYC status in the back end application.
- Reject (with appropriate reject reason).

Summary

Figure 2-15 Exception - Know Your Customer (KYC) Summary Description of kycexceptionsummary.png follows
Description of the illustration kycexceptionsummary.png

Tiles Displayed in Summary:

Main Details - User can view the application and LC details.
Advice Details - User can view the advice details.
Payment Details - User can view the payment details.
Maturity Details - User can view the maturity details.
Loan Preferences - User can view the set loan preferences details.
Limits and Collaterals - User can view limits and collateral details.
FX Linkage - User can view FX linkage details.
Preview Messages - User can preview the draft message generated if any.
Commission, Charges & Taxes - User can view the charge details.
Settlement Details - User can view the settlement details.
Parties Details - User can view party details like applicant, advising bank etc.
Compliance Details - User can view compliance details. The status must be verified for KYC and to be initiated for AML and Sanction Checks.
Assignment of Proceeds - User can view assignment of proceeds details.
Accounting Details - User can view the accounting entries generated in back office.

Note:
When the Value Date is different from the Transaction Date for one or more accounting entries, system displays an Alert Message “Value Date is different from Transaction Date for one or more Accounting entries.

For more information on Action Buttons, refer to the field description table below.

Table 2-27 Exception - Know Your Customer (KYC) Summary - Action Buttons - Field Description

Field	Description
Documents	View/Upload the required document.
Remarks	Specify any additional information regarding the collection. This information can be viewed by other users processing the request. Content from Remarks field should be handed off to Remarks field in Backend application.
Overrides	Click to view the overrides accepted by the user.
Customer Instructions	Click to view/ input the following Standard Instructions – In this section, the system will populate the details of Standard Instructions maintained for the customer. User will not be able to edit this. Transaction Level Instructions – In this section, OBTFPMCS user can input any Customer Instructions received as part of transaction processing. This section will be enabled only for customer initiated transactions.
View LC	Click to view the latest LC values displayed in the respective fields. All fields displayed in LC details section are read only fields.
Reject	On click of Reject, user must select a Reject Reason from a list displayed by the system. Reject Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others Select a Reject code and give a Reject Description. This reject reason will be available in the remarks window throughout the process.
Refer	Select a Refer Reason from the values displayed by the system. Refer Codes are: R1- Documents missing R2- Signature Missing R3- Input Error R4- Insufficient Balance/Limits R5 - Others
Hold	The details provided will be saved and status will be on hold.User must update the remarks on the reason for holding the task. This option is used, if there are any pending information yet to be received from applicant.
Approve	On approve, application must validate for all mandatory field values, and task must move to the next logical stage. If there are more approvers, task will move to the next approver for approval. If there are no more approvers, the transaction is handed off to the back end system for posting.
Back	Task moves to previous logical step.

Parent topic: Import LC Liquidation - Islamic