A Annexure
Oracle Banking Microservices Architecture
The below properties have fixed values and should not be changed.
Table A-1 Oracle Banking Microservices Architecture - Property Values (Fixed Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | flywayTask | migrate |
| 2 | flyway.enabled | true |
| 3 | spring.flyway.enabled | false |
| 4 | plato-config.flyway.domain.locations | db/migration/domain/plato, db/migration/domain/sms, db/migration/domain/cmc, db/migration/domain/oblm, db/migration/domain/vamlm |
| 5 | plato-feed-services.jndi | jdbc/PLATOFEED |
| 6 | plato-batch-server.jndi | jdbc/PLATOBATCH |
| 7 | plato.jndi | jdbc/PLATO |
| 8 | plato-config.jndi | jdbc/PLATO |
| 9 | plato-sec.jndi | jdbc/PLATO_SECURITY |
| 10 | plato-ui-config.jndi | jdbc/PLATO_UI_CONFIG |
| 11 | platoorch.domain.jndi | jdbc/PLATO-O |
| 12 | plato-config.db.jndi | jdbc/PLATO |
| 13 | sms.jndi | jdbc/sms |
| 14 | cmncore.jndi | jdbc/CMNCORE |
| 15 | lrt.jndi | jdbc/LRT |
| 16 | lmc.jndi | jdbc/LMC |
| 17 | lmd.jndi | jdbc/LMD |
| 18 | lmx.jndi | jdbc/LMX |
| 19 | lmm.jndi | jdbc/LMM |
| 20 | lmp.jndi | jdbc/LMP |
| 21 | lma.jndi | jdbc/LMA |
| 22 | lms.jndi | jdbc/LMS |
| 23 | lmr.jndi | jdbc/LMR |
| 24 | lmg.jndi | jdbc/LMG |
| 25 | icl.jndi | jdbc/ICL |
| 26 | vamlmchg.jndi | jdbc/VAMLMCHG |
| 27 | plato-api-gateway.pswd.validation.flag | Y |
| 28 | plato-api-gateway.min.pswd.length | 8 |
| 29 | plato-api-gateway.max.pswd.length | 12 |
| 30 | plato-api-gateway.min.pswd.age | 1 |
| 31 | plato-api-gateway.max.pswd.age | 90 |
| 32 | plato-api-gateway.upper.char.flag | Y |
| 33 | plato-api-gateway.upper.char.count | 2 |
| 34 | plato-api-gateway.lower.char.flag | Y |
| 35 | plato-api-gateway.lower.char.count | 2 |
| 36 | plato-api-gateway.special.char.flag | Y |
| 37 | plato-api-gateway.special.char.count | 1 |
| 38 | plato-api-gateway.numeric.char.flag | Y |
| 39 | plato-api-gateway.numeric.char.count | 1 |
| 40 | actuator.endpoint | prometheus,health |
| 41 | plato-api-gateway.enableAudit | true |
| 42 | sms.placeholderReplacement | true |
| 43 | sms.showUnlockClearUser | Y |
| 44 | domain.placeholderReplacement | true |
| 44 | plato.batch.server.conductor.timeout | 60 |
| 46 | Dspring.main.allow-circular-references | true |
| 47 | user.hierarchyLevel | 4 |
| 48 | user.reporteesHierarchyLevel | 4 |
| 49 | plato-edp-services.edp.obrh.userId | UserId to be used to invoke obrh service from within edp service |
| 50 | plato-edp-services.edp.obrh.branchCode | <BRANCH CODE>
BranchCode to be used to invoke obrh service from within edp service. |
| 51 | plato.batch.server.tas.processor.hostname |
Not applicable for onprem. Can be null Give the tas-processor-service hostname for cloud. |
| 52 | plato.batch.server.tas.processor.port | <SERVER PORT>
Not applicable for onprem. Can be null. Give the tas-processor-service port for cloud. |
| 53 | plato-arch-services.server.port | xxx |
| 54 | plato-dynamic-data-services.server.port | xxx |
| 55 | plato-fast-data-transfer-service.server.port | xxx |
Note:
For the complete properties of Oracle Banking Microservices Architecture file, refer to the folder/pre_deployment_setup/setUserOverrides.sh under OSDC zip. The user must provide appropriate values for the key which are not listed in the above table.
Domain
The below properties have fixed values and should not be changed.
Table A-2 Domain - Property Values (Fixed Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | flywayTask | migrate |
| 2 | flyway.enabled | true |
| 3 | spring.flyway.enabled | false |
| 4 | flyway.domain.ignoreMissingMigrations | true |
| 5 | flyway.domain.outOfOrder | true |
| 6 | spring.cloud.loadbalancer.ribbon.enabled | false |
| 7 | deploy.environment | onPrem |
Provide the appropriate values for the following fields.
Table A-3 Domain - Property Values (Appropriate Values)
| Serial Number | PROPERTY | VALUE |
|---|---|---|
| 1 | spring.cloud.config.uri | <config service uri> |
| 2 | apigateway.url | <apigateway url> |
| 3 | service.logging.environment | <environment> example: DEV, TEST |
| 4 | service.logging.path | <application debug logs path> |
| 5 | user.mapping.required | <User mapping required> |
| 6 | feed.recordLevelApprovalReqd | <true or false> |
| 7 | conductor.properties | Path to /config.properties |
| 8 | INTEGRATION.ENABLED | true or false |
| 9 | cmc-account-services.coherence.enabled | true or false |
| 10 | cmc-advice-services.coherence.enabled | true or false |
| 11 | cmc-base-services.coherence.enabled | true or false |
| 12 | cmc-branch-services.coherence.enabled | true or false |
| 13 | cmc-customer-services.coherence.enabled | true or false |
| 14 | cmc-resourceclass-services.coherence.enabled | true or false |
| 15 | cmc-corebanking-adapter-service.coherence.enabled | true or false |
| 16 | cmc-external-virtual-account-services.coherence.enabled | true or false |
| 17 | cmc-currency-services.coherence.enabled | true or false |
| 18 | cmc-external-chart-account-services.coherence.enabled | true or false |
| 19 | cmc-settlements-services.coherence.enabled | true or false |
| 20 | cmc-resource-segment-orchestrator-service.coherence.enabled | true or false |
| 21 | cmc-external-deposit-account-services.coherence.enabled | true or false |
| 22 | cmc-screenclass-services.coherence.enabled | true or false |
| 23 | cmc-facilities-services.coherence.enabled | true or false |
| 24 | cmc-charges-calculation-services.coherence.enabled | true or false |
| 25 | cmc-account-services.loadCacheOnStartUp | true or false |
| 26 | cmc-advice-services.loadCacheOnStartUp | true or false |
| 27 | cmc-base-services.loadCacheOnStartUp | true or false |
| 28 | cmc-branch-services.loadCacheOnStartUp | true or false |
| 29 | cmc-customer-services.loadCacheOnStartUp | true or false |
| 30 | cmc-resourceclass-services.loadCacheOnStartUp | true or false |
| 31 | cmc-corebanking-adapter-service.loadCacheOnStartUp | true or false |
| 32 | cmc-external-virtual-account-services.loadCacheOnStartUp | true or false |
| 33 | cmc-currency-services.loadCacheOnStartUp | true or false |
| 34 | cmc-external-chart-account-services.loadCacheOnStartUp | true or false |
| 35 | cmc-resource-segment-orchestrator-service.loadCacheOnStartUp | true or false |
| 36 | cmc-external-deposit-account-services.loadCacheOnStartUp | true or false |
| 37 | cmc-screenclass-services.loadCacheOnStartUp | true or false |
| 38 | cmc-facilities-services.loadCacheOnStartUp | true or false |
| 39 | cmc-charges-calculation-services.loadCacheOnStartUp | true or false |
| 40 | sms-core-services.coherence.enabled | true or false |
| 41 | sms-core-services.loadCacheOnStartUp | true or false |
| 42 | cmc-interest-rate-services.server.port | Specify the port |
| 43 | cmc-external-deposit-account-services.server.port | Specify the port |
| 44 | fcubsUserId | Specify the Userid to
communicate with fcubs.
It is used for external pricing for Charge calculation. |
| 45 | fcubsSource | Specify the Source
It is used for external pricing for Charge calculation. |
| 46 | fcubsBranch | Specify the Branch
It is used for external pricing for Charge calculation. |
| 47 | cmc-report-services.coherence.enabled | false |
| 48 | cmc-external-system-services.coherence.enabled | false |
| 49 | cmc-batch-services.coherence.enabled | false |
| 50 | cmc-interest-rate-services.coherence.enabled | false |
| 51 | cmc-interest-rate-services.loadCacheOnStartUp | false |
| 52 | cmc-limits-collaterals-services.server.host | xxx |
| 53 | cmc-limits-collaterals-services.server.port | <server port> |
| 54 | cmc-limits-collaterals-services.server.protocol | xxx |
| 55 | cmc-limits-collaterals-services.server.contextRoot | xxx |
| 56 | cmc-opds-services.isAsyncLoggingEnabled | false |
| 57 | cmc-opds-services.ischargesAsyncLoggingEnabled | false |
| 58 | cmc-sla-services.server.port | <server port> |
| 59 | cmc-txn-code-services.coherence.enabled | false |
| 60 | cmc-txn-code-services.loadCacheOnStartUp= | false |
| 61 | cmc-opds-services.DbLogEnabled | false |
| 62 | cmc-external-chart-account-services.batch.partition.count | 10 |
| 63 | cmc-external-chart-account-services.batch.thread.pool.size | 10 |
| 64 | cmc-external-chart-account-services.batch.txn.fetch.size | 1000 |
| 65 | cmc-external-chart-account-services.batch.txn.validation | false |
| 66 | cmc-external-chart-account-services.batch.commit.frequency | 100 |
| 67 | cmc-external-chart-account-services.batch.handoff.txn.size | 100 |
| 68 | cmc-transactioncontroller-services.coherence.enabled | false |
| 69 | cmc-transactioncontroller-services.loadCacheOnStartUp | false |
| 70 | cmc-priority-service.coherence.enabled | true/false based on the environment. By default, it is true. |
| 71 | cmc-mis-services.coherence.enabled | true/false based on the environment. By default, it is true. |
| 72 | cmc-mis-services.loadCacheOnStartUp | This is the placeholder to load the coherence cache for cmc-mis-services at server start up. Possible values: true/false. |
| 73 | checklistmanagement-services.coherence.enabled | true/false based on the environment. By default, it is true. |
| 74 | checklistmanagement-services.loadCacheOnStartUp | This is the placeholder to load the coherence cache for checklistmanagement-services at server start up. Possible values: true/false. |
| 75 | applicationcategory-services.coherence.enabled | true/false based on the environment. By default, it is true. |
| 76 | applicationcategory-services.loadCacheOnStartUp | This is the placeholder to load the coherence cache for applicationcategory-services at server start up. Possible values: true/false. |
| 77 | cmc-mailnotification-services.coherence.enabled | true/false based on the environment. By default, it is true. |
| 78 | cmc-mailnotification-services.loadCacheOnStartUp | This is the placeholder to load the coherence cache for cmc-mailnotification-services at server start up. Possible values: true/false. |
| 79 | cmc-ml-genai-admin-services.server.port | xxx |
| 80 | cmc.locations | db/migration/cmc |
| 81 | opds.rules.localInvocation | false |
Table A-4 LM Domain - Property Table (Appropriate Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | icl.schemas | <ICL schema> |
| 2 | lma.schemas | <LMA schema> |
| 3 | lmc.schemas | <LMC schema> |
| 4 | lmd.schemas | <LMD schema> |
| 5 | lmg.schemas | <LMG schema> |
| 6 | lmm.schemas | <LMM schema> |
| 7 | lmp.schemas | <LMP schema> |
| 8 | lmr.schemas | <LMR schema> |
| 9 | lms.schemas | <LMS schema> |
| 10 | lmx.schemas | <LMX schema> |
| 11 | lrt.schemas | <LRT schema> |
| 12 | vamlmchg.schemas | <CHG schema> |
| 13 | icl.server.port | <server port> |
| 14 | lma.server.port | <server port> |
| 15 | lmc.server.port | <server port> |
| 16 | lmd.server.port | <server port> |
| 17 | lmg.server.port | <server port> |
| 18 | lmm.server.port | <server port> |
| 19 | lmp.server.port | <server port> |
| 20 | lmr.server.port | <server port> |
| 21 | lms.server.port | <server port> |
| 22 | lmx.server.port | <server port> |
| 23 | vamlm-charge-services.server.port | <server port> |
| 24 | vamlmchg.deploymentType |
"lmchg" for LM Standalone deployment "vamchg" for VAM Standalone deployment "codeployed" for Co-deployed environment |
| 25 | oblm-sweep-services.coherence.enabled | true or false |
| 26 | oblm-maintenance-services.coherence.enabled | true or false |
| 27 | oblm-integration-services.coherence.enabled | true or false |
| 28 | oblm-pool-services.coherence.enabled | true or false |
| 29 | oblm-structure-services.coherence.enabled | true or false |
| 30 | vamlm-charge-services.coherence.enabled | true or false |
| 31 | oblm-report-services.coherence.enabled | false |
| 32 | oblm-icl-services.coherence.enabled | false |
| 33 | oblm-dashboard-services.coherence.enabled | false |
| 34 | oblm-cash-concentration-services.coherence.enabled | false |
| 35 | oblm-messaging-services.coherence.enabled | false |
| 36 | oblm-structure-services.loadCacheOnStartUp | false |
| 37 | oblm.report.sweepSummary.enabled | true/false based on the environment. By default, it is false. |
| 38 | oblm.report.sweepSummary.directory | <REPORTS PATH>
Directory path for sweep summary report for Mizuho report. |
| 39 | oblm.investmentFilePath | <FILE PATH>
Directory path for investment file for Mizuho. |
Table A-5 IC Domain - Property Table (Appropriate Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | obic.schemas | <OBLM-IC schema> |
| 2 | obvamic.schemas | <OBVAM-IC schema> |
| 3 | ddaic.schemas | xxx |
| 4 | obic.bodBatch.server.port | <server port> |
| 5 | obic.chgCalc.server.port | <server port> |
| 6 | obic.config.server.port | <server port> |
| 7 | obic.extAdapter.server.port | <server port> |
| 8 | obic.intaccr.server.port | <server port> |
| 9 | obic.intAccting.server.port | <server port> |
| 10 | obic.intAlloc.server.port | <server port> |
| 11 | obic.intBatch.server.port | <server port> |
| 12 | obic.intcalc.server.port | <server port> |
| 13 | obic.intInput.server.port | <server port> |
| 14 | obic.intliqd.server.port | <server port> |
| 15 | obic.intresolve.server.port | <server port> |
| 16 | obic.maint.server.port | <server port> |
| 17 | obic.maintq.server.port | <server port> |
| 18 | obic.onlq.server.port | <server port> |
| 19 | obic.server.port | <server port> |
| 20 | obic.intradaySchedulerReqd | <Y or N> |
| 21 | obvamic.bodBatch.server.port | <server port> |
| 22 | obvamic.chgCalc.server.port | <server port> |
| 23 | obvamic.config.server.port | <server port> |
| 24 | obvamic.extAdapter.server.port | <server port> |
| 25 | obvamic.intaccr.server.port | <server port> |
| 26 | obvamic.intAccting.server.port | <server port> |
| 27 | obvamic.intAlloc.server.port | <server port> |
| 28 | obvamic.intBatch.server.port | <server port> |
| 29 | obvamic.intcalc.server.port | <server port> |
| 30 | obvamic.intInput.server.port | <server port> |
| 31 | obvamic.intliqd.server.port | <server port> |
| 32 | obvamic.intresolve.server.port | <server port> |
| 33 | obvamic.maint.server.port | <server port> |
| 34 | obvamic.maintq.server.port | <server port> |
| 35 | obvamic.onlq.server.port | <server port> |
| 36 | obvamic.server.port | <server port> |
| 37 | obvamic.intradaySchedulerReqd | <Y or N> |
| 38 | obvamic.eodSchedulerReqd | <true or false> |
| 39 | obvamic.intradaySchedulerReqd | <true or false> |
| 40 | ddaic.bodBatch.server.port | <server port> |
| 41 | ddaic.extAdapter.server.port | <server port> |
| 42 | ddaic.intaccr.server.port | <server port> |
| 43 | ddaic.intAccting.server.port | <server port> |
| 44 | ddaic.intAlloc.server.port | <server port> |
| 45 | ddaic.intBatch.server.port | <server port> |
| 46 | ddaic.intCalc.server.port | <server port> |
| 47 | ddaic.intInput.server.port | <server port> |
| 48 | ddaic.intliqd.server.port | <server port> |
| 49 | ddaic.intresolve.server.port | <server port> |
| 50 | ddaic.maint.server.port | <server port> |
| 51 | ddaic.maintq.server.port | <server port> |
| 52 | ddaic.onlq.server.port | <server port> |
| 53 | dda-ic.server.port | <server port> |
| 54 | obic-online-liquidation-services.coherence.enabled | true or false |
| 55 | obic-interest-resolve-services.coherence.enabled | true or false |
| 56 | obic-interest-liquidation-services.coherence.enabled | true or false |
| 57 | obic-interest-calc-services.coherence.enabled | true or false |
| 58 | obic-interest-accrual-services.coherence.enabled | true or false |
| 59 | obic-intchg-accting-services.coherence.enabled | true or false |
| 60 | obic-charge-calc-services.coherence.enabled | true or false |
| 61 | obic-interest-batch-services.coherence.enabled | true or false |
| 62 | obic-maintenance-services.coherence.enabled | true or false |
| 63 | obic-interest-maintqueue-services.coherence.enabled | true or false |
| 64 | obic-interest-allocate-services.coherence.enabled | true or false |
| 65 | obic-external-adapter-services.coherence.enabled | true or false |
| 66 | obvam-ic-online-liquidation-services.coherence.enabled | true or false |
| 67 | obvam-ic-interest-resolve-services.coherence.enabled | true or false |
| 68 | obvam-ic-interest-liquidation-services.coherence.enabled | true or false |
| 69 | obvam-ic-interest-calc-services.coherence.enabled | true or false |
| 70 | obvam-ic-interest-accrual-services.coherence.enabled | true or false |
| 71 | obvam-ic-intchg-accting-services.coherence.enabled | true or false |
| 72 | obvam-ic-charge-calc-services.coherence.enabled | true or false |
| 73 | dda-ic-online-liquidation-services.coherence.enabled | true or false |
| 74 | dda-ic-interest-resolve-services.coherence.enabled | true or false |
| 75 | dda-ic-interest-liquidation-services.coherence.enabled | true or false |
| 76 | dda-ic-interest-calc-services.coherence.enabled | true or false |
| 77 | dda-ic-interest-accrual-services.coherence.enabled | true or false |
| 78 | dda-ic-intchg-accting-services.coherence.enabled | true or false |
| 79 | dda-ic-charge-calc-services.coherence.enabled | true or false |
| 80 | obic-maintenance-services.loadCacheOnStartUp | true/false based on the environment. By default, it is false. |
| 81 | obic-maintenance-services.coherence.enabled | true/false based on the environment. By default, it is false. |
| 82 | obic-interest-calc-services.tenantkey.enabled | true/false based on the environment. By default, it is false. |
| 83 | obic-interest-accrual-services.tenantkey.enabled | true/false based on the environment. By default, it is false. |
| 84 | obic-intchg-accting-services.tenantkey.enabled | true/false based on the environment. By default, it is false. |
| 85 | obic-online-liquidation-services.tenantkey.enabled | true/false based on the environment. By default, it is false. |
| 86 | obic-interest-liquidation-services.tenantkey.enabled | true/false based on the environment. By default, it is false. |
Table A-6 Oracle Banking Microservices Architecture Domain - Property Table (Appropriate Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | api-gateway.schemas | <API-GATEWAY schema> |
| 2 | plato-batch-server.schemas | <PLATO-BATCH-SERVER schema> |
| 3 | plato-config.schemas | <PLATO-CONFIG schema> |
| 4 | plato-feed-ref.schemas | <PLATO-FEED-REF schema> |
| 5 | plato-feed-services.schemas | <PLATO-REF-SERVICES schema> |
| 6 | platoorch.domain.schemas | <PLATO-ORCH schema> |
| 7 | platoui.schemas | <PLATO-UI schema> |
| 8 | platoui-config.schemas | <PLATO-UI-CONFIG schema> |
| 9 | plato-ui-config.schemas | <PLATO-UI-CONFIG schema> |
| 10 | kafka.brokers | "host:port" for the kafka brokers |
| 11 | kafka.zknodes | "host:port" for the zookeeper nodes. |
| 12 | kafka.security.protocol |
security protocol for kafka Eg: SASL_SSL |
| 13 | kafka.truststore.location |
truststrore location Eg: /scratch/work_area/securityKeys/OBLMclientTrust_142.jks |
| 14 | kafka.truststore.password |
ciphered password of the trustore Eg: {cipher}Password |
| 15 | kafka.binder.configuration.sasl.mechanism | <appropriate value> |
| 16 | kafka.binder.configuration.security.protocol | <appropriate value> |
| 17 | kafka.binder.jaas.loginModule | <appropriate value> |
| 18 | kafka.binder.jaas.options.password | <appropriate value> |
| 19 | kafka.binder.jaas.options.username | <appropriate value> |
| 20 | kafka.broker.password | <appropriate value> |
| 21 | kafka.broker.username | <appropriate value> |
| 22 | kafka.ssl.truststore.location | <appropriate value> |
| 23 | kafka.ssl.truststore.password | <appropriate value> |
| 24 | plato.orchestrator.enableSubWfDynamicAllocation | Enabling dynamic Allocation for subWorkflow |
| 25 | plato.conductor.logging.level | Default - DEBUG |
| 26 | plato.feed.feed.system.objectStore.stripeName | Default - feeds |
| 27 | plato.feed.feed.protocol | Default - http |
| 28 | plato.feed.feed.dateFormat | Default - yyyy-MM-dd |
| 29 | plato.feed.feed.commitFrequency | Default - 1000 |
| 30 | plato.feed.fss.filestore.protocol | Default - http |
| 31 | plato.feed.fss.filestore.host | Default - 127.0.0.1 |
| 32 | plato.feed.fss.filestore.port | Default - 8080 |
| 33 | plato.feed.fss.filestore.contextRoot | Default - filestore/private |
| 34 | plato.feed.fss.filestream.protocol | Default - http |
| 35 | plato.feed.fss.filestream.host | Default - 127.0.0.1 |
| 36 | plato.feed.fss.filestream.port | Default - 8081 |
| 37 | plato.feed.fss.filestream.contextRoot | Default - filestream/private |
| 38 | plato.feed.fss.auth.bearerToken | Default - unset |
| 39 | plato.feed.fss.par.upload.description | Default - fileupload |
| 40 | plato.feed.fss.par.storageDirective | xxx |
| 41 | plato.feed.fss.stripe.service.tag | Default - feed-services |
| 42 | feed.system.approverId | Default approver id for auto approval |
| 43 | plato.feed.fss.bearerTokenPath | xxx |
| 44 | plato.feed.fss.bearerTokenFileName | dummyToken |
| 45 | plato.alerts.protocol | https |
| 46 | plato.alerts.namespace | <environment> |
| 47 | plato.alerts.email.client.port | <port> |
| 48 | plato.multitenant.emailClient.from.email | <environment> |
| 49 | plato.feed.emailClient.from.email | <environment> |
| 50 | alerts.protocol | xxx |
| 51 | alerts.service.name | xxx |
| 52 | alerts.namespace | <environment> |
| 53 | alerts.email.client.port | <port> |
| 54 | plato-regional-configurator-services.server.port | <REGIONAL_CONFIGURATOR_SERVICE_PORT> |
| 55 | plato-regional-configurator-services.db.jndi | jdbc/OBRC |
| 56 | plato-regional-configurator-services.schemas | OBRC |
| 57 | plato-regional-configurator-services.locations |
|
| 58 | plato-apigateway-router.server.port | <APIGATEWAY_ROUTER_PORT> |
| 59 | router.protocol | <ROUTER_PROTOCOL> |
| 60 | router.meadmin.port | <ROUTER_PORT> |
| 61 | plato.eventhub.consumer.maxPollInterval | <MAX INTERVAL VALUE> |
| 62 | plato.eventhub.consumer.maxPollRecords | <MAX RECORD VALUE> |
| 63 | Dtangosol.coherence.clusterportproperty | 7574 |
| 64 | plato.placeholderReplacement | true |
| 65 | plato.dataload.fss.filestore.protocol | xxx |
| 66 | plato.dataload.fss.filestore.host | xxx |
| 67 | plato.dataload.fss.filestore.port | xxx |
| 68 | plato.dataload.fss.filestore.contextRoot | xxx |
| 69 | plato.dataload.fss.filestream.protocol | xxx |
| 70 | plato.dataload.fss.filestream.host | xxx |
| 71 | plato.dataload.fss.filestream.port | xxx |
| 72 | plato.dataload.fss.filestream.contextRoot | xxx |
| 73 | plato.dataload.fss.par.upload.description | xxx |
| 74 | plato.dataload.fss.par.storageDirective | xxx |
| 75 | plato.dataload.fss.stripe.service.tag | xxx |
| 76 | plato.dataload.system.objectStore.stripeName | xxx |
| 77 | plato.dataload.fss.bearerTokenPath | xxx |
| 78 | plato.dataload.fss.bearerTokenFileName | xxx |
| 79 | dataload.job.corePoolSize | 800 |
| 80 | dataload.job.maxPoolSize | 800 |
| 81 | dataload.job.queueCapacity | 800 |
| 82 | dataload.job.gridSize | 800 |
| 83 | datamigration.protocol | xxx |
| 84 | datamigration.host | xxx |
| 85 | datamigration.port | xxx |
| 86 | datamigration.contextRoot | xxx |
| 87 | batch.appId | PLATOCONFIG |
| 88 | plato.batch.appId | PLATOCONFIG |
| 89 | job.abandon.duration | 60 |
| 90 | dataload.protocol | xxx |
| 91 | plato.dataload.framework.eureka.client.connectTimeout | 1000 |
| 92 | plato.dataload.framework.eureka.client.readTimeout | 1000 |
| 93 | plato-feed-services.plato.feed.fss.bearerTokenPath | xxx |
| 94 | userLoginId.minLength | 5 |
| 95 | platoui-placeholderReplacement | true |
| 96 | DEncryptionFlag |
true - new encoding/decoding logic will be applied(more secure) OR false - old encoding/decoding logic will be applied |
| 97 | eureka.client.serviceUrl.defaultZone | xxx |
| 98 | kafka.ssl.endpoint.identification.algorithm | https |
| 99 | kafka.default.producer.sync | TRUE |
| 100 | kafka.default.producer.configuration.max.block.ms | 5000 |
| 101 | kafka.binder.replication-factor | 3 |
| 102 | kafka.binder.required-acks | all |
| 103 | edp.schemas | xxx |
| 104 | edp.db.jndi | xxx |
| 105 | plato-edp-services.coherence.enabled | false |
| 106 | plato-edp-services.server.port | <server port> |
| 107 | plato.schema | xxx |
| 108 | feed.system.timePeriod | 100 |
| 109 | plato.services.entityservices.port | <sms-port> |
Table A-7 OBRH Domain - Property Table (Appropriate Values)
| Serial Number | Property | Value |
|---|---|---|
| 1 | obrh.truststore.path |
Default - null If set, it will be considered Eg: obrh.truststore.path=/scratch/obrh/truststore/ts.jks |
| 2 | obrh.truststore.password |
Default - null If set, it will be considered Eg: obrh.truststore.password=password |
| 3 | fobrh.server.isJavaEE |
Default - true true for weblogic deployment false for tomcat deployment |
| 4 | obrh.taskexecutor.corepoolsize |
Default - 50 If set, it will be considered Eg: obrh.taskexecutor.corepoolsize=100 |
| 5 | obrh.taskexecutor.maxpoolsize |
Default - 50 If set, it will be considered Eg: obrh.taskexecutor.maxpoolsize=100 |
| 6 | obrh.taskexecutor.queuecapacity |
Default - 100 If set, it will be considered Eg: obrh.taskexecutor.queuecapacity=200 |
| 7 | obrh.factory-shipped-data.readonly |
Default - false If set, it will be considered Eg: obrh.factory-shipped-data.readonly=true |
| 8 | obrh.keystore.password.encoded |
Default - false If set, it will be considered Eg: obrh.keystore.password.encoded=true |
| 9 | obrh.usekeystore |
Default - false If set, it will be considered Eg: obrh.usekeystore=true |
| 10 | obrh.keystore.path |
Default - null If set, it will be considered Eg: obrh.keystore.path=/scratch/obrh/truststore/ts.jks |
| 11 | obrh.keystore.password |
Default - null If set, it will be considered Eg: obrh.keystore.password=password |
| 12 | obrh.keystore.alias |
Default - null If set, it will be considered Eg: obrh.keystore.alias=alias |
| 13 | obrh.keystore.aliaspassword |
Default - null If set, it will be considered Eg: obrh.keystore.aliaspassword=password |
| 14 | obrh.audit.type |
Default - KAFKA Value can be <Default/KAFKA/OFF/LOG> Eg: obrh.audit.type=OFF |
| 15 | obrh.alerts.enabled |
Default: false <true or false> Eg: obrh.alerts.enabled=true |
| 16 | obrh.provider.exception.statuscodes |
Comma seperated error codes Eg: obrh.provider.exception.statuscodes=404,500 |
| 17 | obrh.ssl.protocol |
Default - TLS If set, it will be considered Eg: obrh.ssl.protocol=TLSv1.2 |
| 18 | cmc-obrh-services.audit.retention.days |
Number of days for retention policy Eg: cmc-obrh-services.audit.retention.days=7 |
| 19 | cmc-obrh-services.audit.retention.archival |
<Y or N> Y for archiving N for purging Eg: cmc-obrh-services.audit.retention.archival=N |
| 20 | obrh.import.overwrite |
Default: false <true or false> Eg: obrh.import.overwrite=true |
| 21 | cmc-obrh-jms-consumer.connectionFactory | <JMS_CONN_FACTORY_JNDI> |
| 22 | cmc-obrh-jms-consumer.queue | <JMS_CONN_QUEUE_JNDI> |
| 23 | cmc-obrh-jms-consumer.server.port | <SERVER_PORT> |
| 24 | cmc-obrh-services.coherence.enabled | false |
| 25 | cmc-obrh-services.loadCacheOnStartUp | false |
For the complete properties of domain file, refer to the folder
/pre_deployment_setup/setUserOverrides.sh under OSDC
zip.
Note:
For Conductor Properties, refer to Conductor Installation section in Oracle Banking Microservices Platform Foundation Installation Guide.SSL Setup Configuration
The environment set up would be SSL-enabled by default.
The below placeholders would have to be configured into JVM for SSL/Non-SSL setup in Oracle Banking Microservices Architecture domain.
Table A-8 SSL Setup Configuration
| Key | Default Value - On Premise | Default Value - Cloud | Purpose |
|---|---|---|---|
| ${apigateway.protocol} | https | https | Only for API gateway protocol. It must be https only. |
| ${eureka.protocol} | https | http | For inter-service communication protocol. Values can be http or https. |
| ${prefer.ip.address.enabled} | false | false | For prefer IP address flag, it must be false only. |
| ${nonsecure.port.enabled} | false | true | For disabling inter-service communication on non-secure port. Values can be false or true. |
| ${secure.port.enabled} | true | false | For allowing inter-service calls on secure port. Values can be false or true. |
Note:
${apigateway.protocol} should be set as https/http in Oracle Banking Liquidity Management domain irrespective of the SSL/Non-SSL configuration.