Open your Windows or File Explorer to locate the USB drive
Ensure the USB drive is at least 100 MB.
Select This PC to show the USB drive under the
Devices and drives section
Right click on the USB drive and select Format… to
display the format menu
In the Format dialog box, do the following:
Select FAT32 in the File
system field if not already selected. It is often the
default option.
Type ZTP in the Volume
label field
Select Start button to confirm show the
confirmation box
Select OK to confirm and being formatting
After formatting completes, click OK.
Confirm the Format dialog box by doing the following:
The Volume label field and dialog box name shows
ZTP.
The File system type is
FAT32
After above is confirmed, select the Close
button at the bottom.
Locate the downloaded software package (.zip file) on your computer. (ex.
Package name:
<ApplianceName>-A-R9_1_0_0_0_GA_<date>.zip)
Copy the file over to the ZTP USB drive. You should have
a single software package on the drive in the top directory. Do not create any
folders for the file.
Eject the ZTP USB drive.
Continue to the instructions to Configure SD-WAN using out-of-band ZTP.