Traffic Policy Configuration

This configuration record will enable management of tunnel bandwidth on a per-cluster member basis. The name of this policy will be entered into the SBC Tunnel Configurations.

Note:

If you do not need to change any of the implicit defaults for the traffic policy, you do not need to configure this policy at all. The implicit default configuration for this policy is as below. If you must change any of the parameters from the implicit default, you must name the resulting traffic policy default.

Use the following procedure to perform traffic policy configuration if required.

Access the traffic-policy-config configuration element.

ORACLE# configure terminal
ORACLE(configure)# session-router
ORACLE(session-router)# traffic-policy-config
ORACLE(traffic-policy-config)#

Enter a name for this traffic policy configuration. This is the string identifier for this policy.
```
ORACLE(traffic-policy-config)# name  tp1
ORACLE(traffic-policy-config)# 
```
Enter a throttle-rate for this traffic policy configuration. This is the per tunnel throttle rate in packets per second.
```
ORACLE(traffic-policy-config)# throttle-rate 800
ORACLE(traffic-policy-config)# 
```
Enter a max-signaling-rate for this traffic policy configuration. This is the maximum signaling rate to a cluster member in packets per second.
```
ORACLE(traffic-policy-config)# max-signaling-rate 32000
ORACLE(traffic-policy-config)# 
```
Enter a min-untrusted-pct for this traffic policy configuration. This is the minimum percentage of signaling rate allocated to untrusted traffic.
```
ORACLE(traffic-policy-config)# min-untrusted-pct 33
ORACLE(traffic-policy-config)# 
```
Enter a max-untrusted-pct for this traffic policy configuration. This is the maximum percentage of signaling rate allocated to untrusted traffic.
```
ORACLE(traffic-policy-config)# max-untrusted-pct 66
ORACLE(traffic-policy-config)# 
```
Use done, exit, and verify-config to complete configuration of this traffic policy configuration element.
Repeat steps 1 through 7 to configure additional traffic policy configuration elements.